Voltage Testing of XO-1.75

From OLPC
Revision as of 09:12, 13 July 2011 by Wmb@firmworks.com (talk | contribs) (Testing at lower voltage)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

This procedure is for verifying firmware startup at different core voltages.

It assumes that the board is hardware-configured to start at a core voltage of 1.4V.

Test booting at 1.4V by powering on the board in the normal way.

To test booting at 1.345V :

  • Attach a serial port to the XO-1.75.
  • Get into CForth by holding down the rotate key and powering on.
 ok b gpio-set
 ok ofw

It should boot normally.

Retrieved from "http://wiki.laptop.org/mediawiki/index.php?title=Voltage_Testing_of_XO-1.75&oldid=258002"