User:Quozl

James Cameron en This user is a native speaker of English. This user's time zone is UTC+11. @ email quozl at laptop.org

About Me

• Name: James Cameron
• Email: quozl at laptop.org

For Tobor

How to install signed build 883 of release 11.3.0 on XO-1.

The build is installed to the internal NAND flash device. You will need a USB drive or Secure Digital card of at least 1 GB capacity, but only for the duration of the installation.

ALL USER DATA WILL BE ERASED FROM THE LAPTOP!

• Prepare the USB or SD drive:
  • Download os883.img, see How to Download,
  • Save the file to the top directory of the drive,
  • Download os883.img.fs.zip,
  • Save the file to the top directory of the same drive,
  • Rename the file to fs.zip, (removing the os883.img part of the name),
  • Check that the drive contains at least the two files fs.zip and os883.img.

• Prepare the laptop:
  • Make a copy of any data you wish to keep,
  • Check the battery is inserted and locked,
  • Check that the power cord is in place and the battery indicator is green,
  • Turn off the laptop, unless it is already off,
  • Insert the USB drive into any USB port on the laptop,

• Start installing:
  • Hold down all four game keys above the power button,
  • Turn on the laptop,
  • Wait for the message Release the game keys to continue,
  • Release the game keys.

Installation progress will be displayed. Green colour will fill yellow blocks. It will take about five minutes. Once finished, the laptop will reboot automatically. You may remove the USB or SD drive during or after the reboot.

The USB or SD drive can be used on other laptops.

If you see a message Boot failed then either:

• the USB or SD drive has not been properly prepared, or;
• the firmware is out of date and should be updated (see Firmware).

There are no other build sizes for XO-1.