User:Quozl/Fedora 20/Manual network configuration
Jump to navigation
Jump to search
XO-4 8787 mwifiex driver configuration without NetworkManager on Fedora 20.
Enable Kernel Debug Messages on Console
- add debug to kernel command line
- reboot
Enable Driver Debugging
echo "module mwifiex +p" > /sys/kernel/debug/dynamic_debug/control # commands echo "module mwifiex_sdio +p" > /sys/kernel/debug/dynamic_debug/control # bus
Stop Automatic Network Configuration
systemctl stop NetworkManager.service
Manual Network Configuration
# bring the network link up ip link set eth0 up # sends 0x0010
# choose type of network ad-hoc iw dev eth0 set type ibss # sends 0x00f7
# form or join an ad-hoc network iw dev eth0 ibss join x 2437 # sends 0x005b, 0x0028, several 0x0006 (scan), 0x002b (adhoc-start), two 0x0010
# configure ipv4 address ip addr add 172.16.0.1/12 dev eth0 # sends 0x0010 to append to the MAC address list
ip addr delete 172.16.0.1/12 dev eth0 # sends 0x0010 to remove from the MAC address list
iw dev eth0 ibss leave # sends 0x0040, then six 0x0028
iw dev eth0 scan > /dev/null
Disable Driver Debugging
echo "module mwifiex -p" > /sys/kernel/debug/dynamic_debug/control echo "module mwifiex_sdio -p" > /sys/kernel/debug/dynamic_debug/control