Release notes/13.2.4/Installation/XO-1/SD

From OLPC
< Release notes‎ | 13.2.4‎ | Installation/XO-1
Revision as of 03:45, 11 May 2015 by Quozl (talk | contribs) (Created page with '* select an SD card of at least 4GB capacity; it will be erased by the process below, * select a USB drive of at least 1GB capacity, * download [http://dev.laptop.org/~quozl/1123…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
  • select an SD card of at least 4GB capacity; it will be erased by the process below,
  • select a USB drive of at least 1GB capacity,
  • download 32016o0.zip (606 MB) and expand the contents onto the USB drive,
  • Shutdown the XO-1,
  • insert the USB drive and the SD card into the XO-1,
  • hold down all four game keys above the power button,
  • turn on the laptop,
  • wait for the message Release the game keys to continue,
  • release the game keys, progress will be displayed, grey blocks will turn green, and the screen will show:
 Blocks/square: 2        Total blocks: 14195     Now writing: 70  0 %
 Installing to SD card ..... please wait.
  • after a few minutes it will show:
 Blocks/square: 2        Total blocks: 14195     Now writing: 0  0 %
 Rebooting in 10 seconds ... please wait.
  • it is finished, you may the USB drive then, during the reboot, or after the reboot.
Retrieved from "http://wiki.laptop.org/mediawiki/index.php?title=Release_notes/13.2.4/Installation/XO-1/SD&oldid=297335"