Rebuilding OLPC kernel

From OLPC
Revision as of 19:54, 9 April 2007 by Dilinger (talk | contribs) (lack of word wrapping annoys me)
Jump to navigation Jump to search

This document describes building an OLPC kernel from the olpc-2.6 git repository or SRPM. You will want to do this on a Fedora Core 6 machine.

The OLPC kernel sources

The first step involves grabbing the kernel sources; either do a 'git clone' of the kernel git repository, or install the kernel SRPM. Both steps are described on the Kernel page.

Installing the SRPM will place the sources in /usr/src/redhat/SOURCES/olpc-2.6.tar.bz2

Building the RPM (the easy way)

The simplest way to build the kernel RPM involves downloading the SRPM, installing it, and then running the rpmbuild command. The "dist", "olpc", and "head" macros should be defined when building:

  • rpm -ivh kernel-2.6.*-20061026_dc5079fafb767e4olpc1.src.rpm
  • rpmbuild -ba --define "dist olpc1" --define "olpc 1" --define "head dc5079fafb767e4" --target=i586 /usr/src/redhat/SPECS/olpc-2.6.spec

After the build finishes, the newly build RPMs will be in /usr/src/redhat/RPMS, and the build tree that was used will be in /usr/src/redhat/BUILD. To make quick changes to the source, for example you can: 

# cd /usr/src/redhat/BUILD/kernel-2.6.18/linux-2.6.18.i586
# vi drivers/video/geode/gxfb_dcon.c
# make
# scp drivers/video/geode/gxfb_dcon.ko testboard:
# ssh testboard "rmmod gxfb_dcon; insmod ./gxfb_dcon.ko"

Building the RPM (from scratch)

This is the way that the official kernel RPMs are built. Note that this allows you to build within a subdirectory somewhere (rather than using /usr/src/redhat). After grabbing the kernel sources, we:

  • BASE=`pwd`/build; CUR=0
  • git clone --quiet git://dev.laptop.org/users/dilinger/olpc-2.6-rpm $BASE
  • (cd $BASE && mkdir -p BUILD RPMS SOURCES SPECS SRPMS)
  • tar -jc --exclude=.git -f $BASE/SOURCES/olpc-2.6.tar.bz2 olpc-2.6
  • cp olpc-2.6/.config $BASE/SOURCES/kernel-olpc-custom.config
  • rpmbuild -ba --define "dist 1.olpc" --define "olpc 1" --define "head `echo $CUR|cut -b1-15`" --target=i586 --define "_topdir $BASE" $BASE/SPECS/olpc-2.6.spec

The git://dev.laptop.org/users/dilinger/olpc-2.6-rpm repository contains the RPM SPEC file and other things necessary do bootstrap the RPM. 'olpc-2.6' is assumed to be your source tree.

Retrieved from "http://wiki.laptop.org/mediawiki/index.php?title=Rebuilding_OLPC_kernel&oldid=32361"