BookBeaming
Contents
|
Description & Goals
Summary
BookBeaming receives static content using a conventional World Space satellite radio.
Status
The prototyp works with the TONGSHI DAMB-R Radio and the Africa Learning Channel.
As of 26.01.08 any active audio stream can be tapped and recorded. This was however not the original purpose.
Since January the prototyp is broken due to changes in the codewords used. Specifications appear to be nonpublic.
Goals
Access to a wide range of content from the weather report to health care.available content (archive.org)
Collaboration
Sharing one satellite radio could bypass satellite radio shortage in an particular areas.
other ideas
Some of the receivers are equipped with a FM transmitter. (frequencies 87.7, 88.1, 87.9, 107.5, 107.7, 107.9) Not working on either battery or USB power. Othere issues signal is too weak (theoretically it could be possible to increase the signal strenght in a firmware or hardware modification)
example source code for audio
Records the current channel via usb. Requires pyusb. It is possible to use this for recording data transmissions. (data still needs to be reformated according to codewords)
import usb
import struct
def opendevice(idVendor, idProduct):
devices=[]
for b in usb.busses():
for d in b.devices:
if d.idVendor==idVendor and d.idProduct==idProduct:
devices.append(d)
if len(devices)==1:
device=devices[0]
return device
elif not devices:
raise "Device not found"
else:
raise "More than one device found"
def read(dh):
try:
r = dh.bulkRead(0x00000082,0x40,10)
except:
return read(dh)
return struct.pack(64*'B',*r) """ b before -128 <= number <= 127 now 08.03.2008 it's B 0 to 255"""
if __name__=="__main__":
device1=opendevice(0x174e, 0x5357)
dh=device1.open()
dh.claimInterface(0)
flob=open('out.mp3','wb')
while 1==1:
buffer1 = read(dh)
buffer2 = read(dh)
d = "".join([buffer1, buffer2])
#print repr(d) console out
flob.write(d)
fileobj.close()
