Help Activity refresh/Chapter/Starting the XO

From OLPC
Jump to: navigation, search

Starting the XO

http://laptop.org/8.2.0/manual/OLPC_simple/StartingXO/417_600w.png

To start the XO, press the Power button, near the lower right corner of the screen. The XO takes about two minutes to start up.

If the battery needs charging, the light next to the power button glows red. Plug the AC adaptor into the left side of the XO and plug the power cord into an outlet if you see a red light or if the XO does not start up.

If you have difficulty starting your XO, refer to the Repairing chapter for ideas.

Starting for the first time

After you press the power button and the XO initially starts up, the XO sceen asks for your first name. The next time you start it, it remembers your name and goes directly to the Home View. Later on you can learn how to change to a nick name of your choosing.

  1. Type your name.

http://laptop.org/8.2.0/manual/OLPC_simple/StartingXO/resized_400x300_Simple_Manual_01_Entering_Name.png

  1. After you enter your name, click Next. (Use a finger on the touchpad below the keyboard to move the arrow over the word "Next". Press the key below the touchpad on the left with an "X" on it to "click".)

http://laptop.org/8.2.0/manual/OLPC_simple/StartingXO/resized_400x300_Simple_Manual_02_Entered_Name.png

3Next, you see a small O on top of an X. This symbol represents you when you use your XO. Use your finger on the touchpad to move the arrow over the person symbol. "Click" this person symbol by pressing the key with an "X" on the left below the touchpad to choose colors that you like.

http://laptop.org/8.2.0/manual/OLPC_simple/StartingXO/resized_400x300_Simple_Manual_03_Choosing_Color.png

  1. After you chose your colors, click "Done."

http://laptop.org/8.2.0/manual/OLPC_simple/StartingXO/resized_400x300_Simple_Manual_04_Chose_Color.png

Putting the XO to sleep

When you are ready to stop using your XO for a while, you can put it to sleep by pushing the power key you used to turn it on. The screen shows that is goes to sleep when you haven't been using it for a while, or when you push the power button.

< we need a screen shot of the go to sleep image >

Shutting down the XO

When you have finished using the computer, push the power key twice within in 5 seconds. The first push will display the sleep window. The second push will display the large stop sign.

< we need a screen shot of the stop sign image >

Forced Shutdown

Whenever the XO becoumes unresponsive to the keyboard or the touchscreen, you can make an emergency shutdown by pressing and holding the power button for a few seconds. Be careful that your power button does not get "stuck" in the down position. If it does get stuck, the XO does not detect the depression of the power button, and does not turn on. If this happens, refer to the Repairing chapter for information.

Author : Starting the XO
© adam hyde 2008
Modifications:
Anne Gentle 2008
Caryl Bigenho 2008
Charles McCarthy 2008
A Holt 2008
Janet Swisher 2008
Sandy Culver 2008
Tom Boyle 2008
G Hunt 2012