OLPC Firmware q7b11
|
NOTE: The contents of this page are not set in stone, and are subject to change! This page is a draft in active flux ... |
|
This page is monitored by the OLPC team.
Contents
OLPC Firmware Release q7b11
Works on XO-4 B1 and C1 only. Do not use on XO-4 A or other models.
- new embedded controller firmware EC 0.3.08,
- touchscreen, change firmware to version 0.0.0.10, breaks automatic upgrade, you must this once
ok update-nn-flash
| Download | q7b11.rom |
| Build date time | 2013-01-07 22:12:15 |
| Source revision | 3516 |
| EC version | EC 0.3.08 |
| CForth version | 7b9cfcf1 |
| WLAN 8686 version | 9.0.7.p2 |
| WLAN 8787 version | 14.66.09.p80 |
Changes
Open Firmware
CForth
- disable pull-up on TOUCH_HD# signal from touchscreen controller and IR PCB,
EC
- see EC 0.3.08
Touchscreen
- reverse polarity of the host disable signal,
