OLPC Firmware q7b38

This page is monitored by the OLPC team.

Summary

Works on XO-4 B1 and later only.

3719 libertas - use a single byte sequence number for 8787, fixes use of adhoc-start with test-antenna
3718 core - use initial values from a current instance package if there is one, fixes clearing of display on subsequent select, caused by my-termemu not persisting, fixes OLPC #12765, thanks to Mitch Bradley.
3717 OLPC XO-4 - bump EC, Android power button up event support
3716 OLPC - preserve some comments against th seti camera initialisation as compared with kernel
3715 OLPC XO-4 - reserve RTC CMOS for dual boot state
3713 OLPC XO-1.75 XO-4 - edi-open-active broke stack balance by returning 0 if the EC was freshly powered up, fixes #12751
3712 usb - trivial comment improvement
3711 OLPC XO-1.75, XO-4 - add boost charge command, for developer use
3710 OLPC - keyject, avoid cancel, use black-letters throughout
3702 OLPC XO-1.5 XO-1.75 XO-4 - restore four game key reflash over HTTP, by doing a redundant scan for the OLPC-NANDblaster SSID before handing control to NANDblaster, fixes #12740. Due to r3701, active scan for transmitting laptop became unreliable probably because of the lack of air time, so switch to a passive scan, and increase passive scan to cover two beacons.
3701 libertas - fix backward logic for selecting scan time based on scan time, regression introduced in r3633
3700 OLPC XO-4 - bump EC
3699 OLPC - ntp-set-clock did leave device open if name lookup failed, fixes #12735

reinit AC detect timer when leaving forced discharge mode, to avoid erroneous low-battery power-downs; this mode is only during testing (runin, and battery-capacity tests). EC 0.4.11
emit a new event when the power button is released, so a kernel can time the press, EC 0.4.12
increase the hard powerdown button press timeout from 2 to 5 seconds to give user-level more flexibility when looking for long presses. EC 0.4.12