Obsolete:Upgrade VIP

406.14 was shipped from Quanta with B3 units and has a sound related bug -- tamtam sound doesn't work. You need to upgrade these to 406.15 minimum. This build should only be used for extending trials, where they have a bunch of B2 units that can't run newer builds very well. This build has no collaboration capability.

542 was shipped from Quanta on B4 and C machines. This build also has a problem with sound. It is required to upgrade to 542.3 (sound works), or 542.4 for non-US/English laptops (sound works for everything but tamtam, so this build removes tamtam from base). This build was used for demonstrating collaboration and can be used on newer B2 machines (B2-2); but it is slow and the camera is not great.

623 was shipped from Quanta on C2 (MP) machines. This build has some problems with wireless connectivity and needs to be upgraded to 649.

649 is now the latest build is going to be shipped on mass production units. It is good for all laptops from B3 and later. Do not upgrade B2 units to this release as it is way too slow; and the camera is unusable.

Follow the steps below to upgrade to the appropriate release.

First ensure you have a power adapter AND battery plugged into the laptop.
For B3 or B4 units that have a really old build (406.14), you need to first flash the firmware
- Press the power button and hold all four gamekeys; then hit ESC when you get the message that you have 3 seconds to hit escape.
- Insert the OFW or Firmware Stick
- At the OK prompt type: 'flash u:\q2d07.rom'
- When it powers down hold the power button until it stays off (it will want to reboot).
Insert the 'Build 650' USB stick into the laptop while it is powered off; and power on holding the Square key.
While booting up look for the 'Openfirmware CL1 Q2D06' (or Q2D07) message.
When it is finished booting and upgrading the nand (about 5 min), hit Alt+Ctl+Mesh keys together; check that the version number is 650.
If you need to add flash and Watch&Listen go to the next section.
If you are finished and ready to ship, type 'root', hit return, and then 'poweroff'

To Add flash info

Go into Sugar and add a nickname and choose a color, leave the 'Build 650' stick in the laptop; or insert one that has the 'extras' on it.
Go back into virtual terminal, ALT+CTL+Mesh and login (if necessary)
Type 'cd /media/BUILD/'
Type './extras.sh'
When this finishes; type 'cd /home/olpc'
Use Alt+Ctl+home to go back to sugar, open the journal and unmount the USB from the icon there. When the USB successfully unmounts, then remove it.
Use sugar 'shutdown' to shutdown and ship the unit; or 'reboot' to go onto the test section.

Test:

In the mesh view, click on the circle labeled "MediaLab 802.11".
Wait until the circle outline is blinking; then you should see other XOs.
Start 'Browse'.
From the browser, click on google search and search on 'cats' (or anything you want); make sure you get a good page.
Go back to the browser; click on books, and then books again.
Click on the Quaran; open it from the clipboard when it has finished loading.
Close the book.
Use the browser to open and play a utube video (look for a very small one) to know that flash is working.
Open the Journal and see the browse activity listed.
Go to the Home view, hover over the XO; click on shutdown.

boot up laptop and ctl-alt-mesh
log in as root
nano /etc/sysconfig/i18n
change LANG to appropriate value, 'en_US.UTF-8' for english; 'es_AR.UTF-8' will give you spanish for Argentina.
ctl-x, and 'yes' to save
type 'cat /etc/sysconfig/i18n' to check.
shutdown or reboot (from sugar)

For Builds over 623

open the Terminal activity
nano /home/olpc/.i18n
change LANG to appropriate value, 'en_US.UTF-8' for english; 'es_AR.UTF-8' will give you spanish for Argentina.
ctl-x, and 'yes' to save
type 'cat /home/olpc/.i18n' to check.
reboot (from sugar)

If you want to remove the name and color chosen, then, before you shutdown:

If you want to change just the name:

Contents