Peabody Setup
You should use each key in the following order
Collector key
This gets the serial number in order to create an activation code/developer key.
- Plug the stick in a turned off XO, and turned it on. The data will be stored and the XO will be automatically rebooted.
- You can move on the next XO using the same stick, until you are done.
- It is advisable if you keep track of the order of the XOs at which you put the key. Every time you apply the collector key you should stick a name tag on the XO, and keep the order. In the end we can pair serial numbers with names.
- In the end we can use the LAPTOPS.DAT file created in the usb to create a developer key.
Developer key
For every LAPTOPS.DAT file we will create a develop.sig file.
- Paste this file in the security directory in the developer key
- You can apply the same key in all XOs from which you created the LAPTOPS.DAT file.
- Plug the stick when the XO is turned off, and turn it on.
- While it says "Type the ESC key to interrup" press the ESC key.
- Type
disable-security
and enter. The XO will reboot automatically. - Again, while it says "Type the ESC key.." press the ESC key.
- Type for a second time
disable-security
and enter. The XO will reboot automatically - Do not let it boot. Turn it off again by holding the Power button.
Upgrade key
All XOs will be upgraded to the latest Update.1 build 700.
- Plug the key while the XO is off, and turn it on
- After several minutes the XO will