Talk:Upgrading the firmware

From OLPC
Revision as of 15:11, 10 January 2008 by Chihyu (talk | contribs) (New page: == Manual upgrade == 9. When the upgrade is complete, the laptop will power off. You might want/need to unplug the power and remove the battery for a few seconds and then replace both and...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Manual upgrade

9. When the upgrade is complete, the laptop will power off. You might want/need to unplug the power and remove the battery for a few seconds and then replace both and power it back up. This resets the Embedded Controller so it will use the new firmware.

The laptop will reboot instead of a simple power off. --Chihyu 14:11, 10 January 2008 (EST)