Tests/SmokeTest/Chat

From OLPC

Jump to: navigation, search

Test case: Collaboration with Chat
How to report results

Stream 8.2.1, 11.2, Any
Category SmokeTest Sub-category Collaboration with Chat
Component warning.pngEmpty strings are not accepted.
Feature warning.pngEmpty strings are not accepted.
Objective Initiate a chat within your neighborhood
Tools 2+ XO units
Setup warning.pngEmpty strings are not accepted.
Procedure Actions
  1. On both XO's click on the same mesh (or ad-hoc) network
  2. Confirm that both units are on the same network
  3. Open chat with one XO
  4. Share the activity with the neighborhood
  5. Go to the Network view of that XO
  6. Go to the Network view of the second XO
  7. In the network view of the second XO click on the chat activity that the first one just shared
  8. Type a few lines in the chat activity on each XO
  9. Close the chat activity on both XOs
  10. Repeat the above steps, this time registered to the school server as the network
  11. Repeat a third time, connected to AP directly to Internet.
  12. Follow the same steps, but starting with the second XO. (see that it works both ways)
Expected Results
and Pass Criteria
Verify
  • The shared chat activity shows up in the network view of both laptops
  • Whatever one laptop types in the chat window after both are connected is seen by both laptops
  • Chat works both ways and on all three networks
Comments warning.pngEmpty strings are not accepted.
Release Stream Build Pass/Fail Trac Ticket(s) Comment(s) Date of Test
Candidate 8.2 759 Pass warning.pngEmpty strings are not accepted. warning.pngThe date "" was not understood (support for dates is still experimental).


Candidate 8.2 760 Pass warning.pngEmpty strings are not accepted. warning.pngThe date "" was not understood (support for dates is still experimental).


Candidate 8.2 762 Pass but passes only for xstest school server. no other networks are supporting the chat (which is also prob an xo network issue) warning.pngThe date "" was not understood (support for dates is still experimental).


Candidate 8.2 765 Pass olpc-wep was able to chat with olpc-wpa, but neither could with canopy warning.pngThe date "" was not understood (support for dates is still experimental).


Candidate 8.2 765 Pass chat fine in ml1CC (the new media lab) warning.pngThe date "" was not understood (support for dates is still experimental).


Candidate 8.2 765 Pass chat fine in mesh channel 6 warning.pngThe date "" was not understood (support for dates is still experimental).


Candidate 8.2 766 Pass Chat fine with xstest school server and ml1cc, and both ways warning.pngThe date "" was not understood (support for dates is still experimental).


Candidate 8.2 766 Pass channel 6 works great, ml1CC works great warning.pngThe date "" was not understood (support for dates is still experimental).


Candidate 8.2 767 Pass used a usb upgraded XO from 656 to chat with a clean installed to 767 XO. worked fine on both ml1cc and mesh channel 11 warning.pngThe date "" was not understood (support for dates is still experimental).


Candidate 8.2 767 Pass using two XOs that were copy-nand clean installed with gg-767-4 on channel 6. after a slight hiccup in the chat, after reboot it worked fine. warning.pngThe date "" was not understood (support for dates is still experimental).


8.2.0 (767) 8.2 767 Pass smoke testing new firmware q2e21, worked fine on mesh channel 11. 2008/11/05


Candidate 8.2.1 24 Pass Firmware q2e29a, software os24.img

Worked both ways on mesh, on AP and on school server (both unregistered and registered)

2009/01/29


Facts about Tests/SmokeTest/ChatRDF feed
Build number 759  +, 760  +, 762  +, 765  +, 766  +, 767  +, and 24  +
Build stream 8.2.1  +info.pngLink to builds in stream, Packages in stream, ChangeLog, Differences vs joyride , 11.2  +info.pngLink to builds in stream, Packages in stream, ChangeLog, Differences vs joyride , Any  +info.pngLink to builds in stream, Packages in stream, ChangeLog, Differences vs joyride , and 8.2  +info.pngLink to builds in stream, Packages in stream, ChangeLog, Differences vs joyride
Comments warning.pngEmpty strings are not accepted. , but passes only for xstest school server. no other networks are supporting the chat (which is also prob an xo network issue), olpc-wep was able to chat with olpc-wpa, but neither could with canopy, chat fine in ml1CC (the new media lab), chat fine in mesh channel 6, Chat fine with xstest school server and ml1cc, and both ways, channel 6 works great, ml1CC works great, used a usb upgraded XO from 656 to chat with a clean installed to 767 XO. worked fine on both ml1cc and mesh channel 11, using two XOs that were copy-nand clean installed with gg-767-4 on channel 6. after a slight hiccup in the chat, after reboot it worked fine., smoke testing new firmware q2e21, worked fine on mesh channel 11., and Firmware q2e29a, software os24.img Worked both ways on mesh, on AP and on school server (both unregistered and registered)
Created warning.pngThe date "" was not understood (support for dates is still experimental). , 5 November 2008  +, and 29 January 2009  +
More notes warning.pngEmpty strings are not accepted.
Pass criteria Verify
  • The shared chat activity shows up in the network view of both laptops
  • Whatever one laptop types in the chat window after both are connected is seen by both laptops
  • Chat works both ways and on all three networks
PassFail Pass  +
Short name Collaboration with Chat  +
Software release Candidate  +, and 8.2.0 (767)  +
System component warning.pngEmpty strings are not accepted.
System feature warning.pngEmpty strings are not accepted.
Test category SmokeTest  +
Test objective Initiate a chat within your neighborhood  +
Test procedure Actions
  1. On both XO's click on the sa Actions
  2. On both XO's click on the same mesh (or ad-hoc) network
  3. Confirm that both units are on the same network
  4. Open chat with one XO
  5. Share the activity with the neighborhood
  6. Go to the Network view of that XO
  7. Go to the Network view of the second XO
  8. In the network view of the second XO click on the chat activity that the first one just shared
  9. Type a few lines in the chat activity on each XO
  10. Close the chat activity on both XOs
  11. Repeat the above steps, this time registered to the school server as the network
  12. Repeat a third time, connected to AP directly to Internet.
  13. Follow the same steps, but starting with the second XO. (see that it works both ways) e second XO. (see that it works both ways)
Test setup warning.pngEmpty strings are not accepted.
Test subcategory Collaboration with Chat  +
Test tools 2+ XO units  +
Personal tools
  • Log in
  • Login with OpenID
About OLPC
About the laptop
About the tablet
Projects
OLPC wiki
Toolbox