XO 1.75 C1 ECOs

From OLPC
Revision as of 10:07, 11 December 2011 by Wad (talk | contribs) (→‎Loss of first keypress when suspended)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  This page is monitored by the OLPC team.

These are recommended engineering change orders (ECOs) to the C1 prototype of the XO-1.75 laptop. This is NOT a list of changes from C1 to C2, that is located elsewhere.

Loss of first keypress when suspended

If an unmodified XO-1.75 laptop is suspended, and a user presses a key, the laptop wakes up but the keypress is lost (<trac>11401</trac>).

Fixing <trac>11401</trac>
  • Populate R352 and R354 with zero ohm resistors (or short them).
  • Install the most recent OFW or EC code.

Done to very few laptops.

Camera Problems

If the camera doesn't work right, it is possibly due to a marginal power switch.

  • Replace Q20 with an AO3402, or even with another AO3404 (part currently mounted).

Done to very few laptops --- this problem wasn't detected until the XO-3 A1 bringup.