OLPC Firmware q3a35
OLPC Firmware Release q3a35
Works on XO-1.5 A1, A2, B1, B2, B3, and C1 systems, but does not work on any XO-1 machines.
Download: q3a35.rom
The preceding release had some internal inconsistencies due to incomplete checkin of some experimental source changes, possibly leading to fs-update problems. This release stabilizes the source base with corrections for those inconsistencies, and adds some support that will eventually be useful for NANDblaster.
Changes since q3a34
- svn 1771 - Libertas WLAN driver improvements for adhoc multicasting.
- svn 1769 - hopefully-faster fs-update using erase-blocks and predeclared SD write lengths
- svn 1768 - larger maximum size for OFW DMA area, for NANDblaster
- svn 1767 - Added some new string parsing routines to the client library.
- svn 1766 - Fast code implementations of interrupt controller handling words.
- svn 1765 - Added disable-serial command.
- svn 1764 - Fixed problem introduced by r1740 - incorrect wait for completion after erase-blocks.
Open Firmware is svn 1773
EC code is version 1.9.24
<same as in q3a34>
WLAN firmware is 9.70.7.p0
<same as in q3a14>
Which Firmware Do You Have?
If your machine is not in secure mode, the firmware version is displayed in the startup banner, as in:
OLPC XO 1.5, 1 GiB memory installed, S/N SHF7250024D
OpenFirmware CL1 Q3A04 Q3A
^^^^^
If your machine is in secure mode, you can go to the Terminal activity and type
cat /ofw/openprom/model
If your machine is in secure mode but the OS will not start, just go ahead and try to upgrade the firmware anyway. The procedure is safe and will not do anything if you already have up-to-date firmware.
You can see the firmware version in secure mode by powering up with the "check" game button held down.
You can also go to the main Sugar screen, click on the little man and select "about this XO"
Installation
When installing new firmware, you must have a well-charged battery and the AC adapter plugged in. The firmware update code will not proceed otherwise. Possible error messages are:
| error message | how to fix |
|---|---|
| AC not present | plug in the power cord, check the battery LED is on, then try again. |
| No external power | plug in the power cord, check the battery LED is on, then try again, |
| No battery | plug in the battery, check the latches, then try again, or try another battery, |
| Battery low | allow more time for the battery to charge, then try again, or try another battery. |
Unsecured Laptop
This section is for unsecured laptops. Most XO-1.5 and XO-1.75 laptops are unsecured. Most developer XO laptops are unsecured. To unsecure your laptop, follow the instructions at Activation and Developer Keys.
You may install using either:
- a USB drive or SD card,
- the laptop's internal drive,
- a network.
Choose one.
Using a USB drive or SD card
- download the firmware from http://dev.laptop.org/pub/firmware/q3a35/q3a35.rom and save it to a USB drive or SD card,
- shutdown the laptop,
- check the battery is inserted and locked,
- check that the power cord is in place and the battery indicator is green,
- insert the USB drive or SD card,
- turn on the laptop, and get to the 'ok' prompt. See Ok for more detail. You should see:
ok
- if the downloaded file is on a USB drive, type:
flash u:\q3a35.rom
- if the downloaded file is on an external SD card:
flash sd:\boot\q3a35.rom
- wait for the laptop to reboot itself,
- remove the USB drive or SD card.
(Expert users may remove the USB drive after the message "Got firmware" ... at this stage the file has been read and closed.)
Using the laptop internal drive
An alternate method is to download the firmware file to the laptop internal drive and then install from the internal drive.
- start the laptop,
- connect to a wireless or wired network,
- start the Terminal Activity and type:
su cd /versions/boot/current/boot/ wget http://dev.laptop.org/pub/firmware/q3a35/q3a35.rom
- shutdown the laptop,
- check the battery is inserted and locked,
- check that the power cord is in place and the battery indicator is green,
- turn on the laptop, and get to the 'ok' prompt. See Ok for more detail. You should see:
ok
- if the downloaded file is on an XO-1, type:
flash n:\boot\q3a35.rom
- if the file is on the internal SD card of an XO-1.5 or XO-1.75:
flash int:\boot\q3a35.rom
Using a network
You will need a compatible USB to ethernet adapter, or an open or WEP wireless access point, connected to the internet.
- shutdown the laptop,
- check the battery is inserted and locked,
- check that the power cord is in place and the battery indicator is green,
- turn on the laptop, and get to the 'ok' prompt. See Ok for more detail. You should see:
ok
- if using wireless, type the essid of the wireless network:
essid mynetwork
- if using a WPA wireless access point, type the WPA key for the network:
wpa passphrase
- type the flash command using the download link above, but change all slash characters so they are backwards, for example:
flash http:\\dev.laptop.org\pub\firmware\q3a35\q3a35.rom
Secured Laptop
Secured laptops can only use flash firmware that has been signed. All mass-production machines had the latest firmware at the time of manufacture.
Upgrading firmware describes how to upgrade to a newer signed firmware release.
See also
- Cheat codes for information about how game buttons control startup options.