Search results

[[16.04.2]] is an OLPC OS release. The target platform is [[NL3]] only. * hardware identification of the NL3 laptop; in My Settings, About my computer; model, CPU, RAM, and disk size,

This page is for recipes for connecting specific printer models to XO laptops. ...as possible. Deferring to the CUPS documentation or to LinuxPrinting.org is likely to prove overwhelming to many new users. Don't assume that the read

=== Is your network name visible? === .... Move the mouse over each to see the network name. If your network name is not shown, then perhaps:

...two offices are connected by a Virtual Private Network tunnel. The privacy is related to the secrecy of the software keys used in creating the tunnel. ...are the same, for every schoolserver. So the XSCE VPN is not private. It is PUBLIC. The XSCE VPN provides connectivity, not privacy! It's up to you to

Currently the CentOS image is identified with the Intel NUC. I think it should be possible to install the ...ure /dev/sdb points to the usb stick and not the drive where the iso image is located (normally the computer's hard drive). An error could result in eras

...oint (AP) to properly serve other LAN/Intranet client XOs. (If the Wifi AP is a router, DO NOT plug into its "WAN" port -- instead use any of its LAN/nor ...the 172.18.126.0/24 range and the netmask to 255.255.224.0. That IP range is set aside on the XSCE for static network devices. Be sure to make a note o

A ''[[Mailing lists|mailing list]]'' is a service that forms an email-based communication channel between a number * '''Subscription''' is open to anyone; just provide your email address in a simple form.

...ough the networks are visible from the OLPC, they stall when user enters a password. ...ding_the_XO|upgrading their XO]] to build 653 or higher, where WPA support is much better. Of course, to be able to do this, you need to be connected to

...disk in order to proceed with the installation. If the internal hard disk is less than that, you can use a sdcard to install the system, check the follo ...N) so kids' XOs can later connect their XOs to the server. PLEASE NOTE: It is entirely possible to use an old router as an access point for the AP-LAN.

Note: WRMS is being rolled out gradually as of July 2010. It is very easy for you and for OLPC to see what WRs are still open, and which on

#Verify the dynamic host configuration is functional. #Go to my neighborhood.

Although more detail is on this page, these other instructions might be more appropriate for newer ...currently running from the system in /versions/run/''build_number'', which is a copy-on-write mirror of /versions/pristine/''build_number''. We're going

* You will need a USB drive and/or SD card that is at least 600 MB (although you'll probably want something at least 1.5 GB). ...u have 194 MB of free space on your XO you should be fine. A better choice is both a 2 gig SD card to run Ubuntu from and a USB drive to hold the files t

[[13.2.8]] is an OLPC OS release. The target platforms are XO-1, XO-1.5, XO-1.75 and XO- * fix spacing of My Settings, About me, age picker,

...vers. If you only need to install a small number of XS servers once, this is probably overkill. However, if you have a large number or need to install ...om a security point of view. The first is that selinux is disabled. This is the case in the original XS 0.6 kickstart file and I retained it because I

...ate emails, even if you know a good candidate to answer your message. This is because both your questions and any responses will be public, adding to com The mailing list address is stated clearly on the list information page for the list in question. For e

| Used WEP-Open with 128-bit hex key password ...this device to automatically choose the least congested frequency, but in my office that ends up being something other than 1, 6 and 11 most of the time

# Verify the External SD card used for additional storage is functional. ...must be inserted into XO before the XSCE install process is started, if it is to be recognized, and incorporated in the disk layout.

This is a collection of "How to Do X" snippets. Feel free to add your favorites. si ' "ok" is (ok)

This is the beginning of working up how to integrate [[Union File Systems]] and the ...e overlay-management system to provide access to the selected files. This is assumed to be less invasive than rewriting applications' file-access operat