OLPC Firmware Q2A62: Difference between revisions
Jump to navigation
Jump to search
m (categorization) |
(FIELD_OTHER) |
||
| Line 21: | Line 21: | ||
* OFW: Support FAT filesystem on devices with sector sizes other than 512. |
* OFW: Support FAT filesystem on devices with sector sizes other than 512. |
||
FIELD_MESSAGE_deldomc |
|||
=== Installation Caveats === |
|||
* '''If you have a B1 system:''' |
|||
# Perform the auto-reinstall procedure at http://wiki.laptop.org/go/Autoreinstallation_image '''before''' upgrading to this firmware version |
|||
# '''DO NOT''' use olpcflash to write new firmware images. Doing so will erase the manufacturing data that was added at the factory. |
|||
* After you reflash, you must power cycle by physically removing power from the system. A warm-start or button-induced restart is not sufficient. Please remove both the battery pack and wall adapter for 10 seconds. |
|||
''ATest users only:'' If you use olpcflash to write this image, you must use the --brick option.<br> Example: <code>olpcflash --brick -w image.rom</code><br> This will update your EC code. |
|||
=== Known issues === |
=== Known issues === |
||
Revision as of 15:59, 16 December 2008
This page is monitored by the OLPC team.
OLPC Firmware Production Release Q2A62 - 2006-12-11
This is the update release for the B-test build.
MD5:
556086265ee9950aaa91e5662b6b5733 olpc-Q2A62.rom
Changes since Q2A54
- EC: update to A62
- EC: Dead battery charging fix
- EC: Add battery charging indicator LED
- OFW: Update to SVN 55
- OFW: Improve performance by preallocating some DMA resources.
- OFW: Support USB storage devices that identify themselves as "removable"
instead of "scsi"
- OFW: Support FAT filesystem on devices with sector sizes other than 512.
FIELD_MESSAGE_deldomc
Known issues
- Auto-repeat is slow on some USB keyboards
- NVRAM storage for configuration variables is not yet implemented.
- JFFS2 does not handle ECC
- The boot menu is incomplete
- Dirctory symlinks have a problem.
ATest -- Infineon RAMs only
Thise is a special purpose image. Do not use except on A-test boards with Infineon RAMS.
For more info see Upgrading_to_LinuxBIOS#Checking_your_DRAM_type
MD5:
05858dcc6a0d7318de141cd4ca537028 olpc-Q2A62_CL2.5.rom