OLPC Firmware Q2A53: Difference between revisions
Jump to navigation
Jump to search
m (categorization) |
(FIELD_OTHER) |
||
Line 23: | Line 23: | ||
* OFW Compilation process: Built from open source svn upstream instead of from tarball |
* OFW Compilation process: Built from open source svn upstream instead of from tarball |
||
FIELD_MESSAGE_domrelorlae |
|||
=== Installation Caveats === |
|||
* After you reflash, you must power cycle by physically removing power from the system. A warm-start or button-induced restart is not sufficient. Please remove both the battery pack and wall adapter for 10 seconds. |
|||
''ATest users only:'' If you use olpcflash to write this image, you must use the --brick option.<br> Example: <code>olpcflash --brick -w image.rom</code><br> This will update your EC code. |
|||
BTest-1 users should '''NOT''' use olpcflash to write new firmware images. Doing so will erase the manufacturing data that was added at the factory. |
|||
=== Known issues === |
=== Known issues === |
Revision as of 17:18, 16 December 2008
This page is monitored by the OLPC team.
OLPC Firmware Production Release Q2A53 - 2006-12-1
This is the update release for the B-test build.
MD5
a1af762465a6b2a0a8939d51d6e31f9e olpc-Q2A53.rom
Changes since Q2A42
- EC update to A51
- OFW: Some nand write fixes for spurious errrors
- OFW: Flash preserves mfg data
- OFW: Sets keyboard type in CMOS RAM based on manufacturing data
- OFW: Network is enabled - works with Ax88772 and Ax8817x USB ethernet chips
- OFW: Boot process polish - color icons, speedups, function key handling, less screen flashing
- OFW: USB STALL fixes - some USB devices (e.g. keyboards) that used to fail now work
- OFW: Serial and kbd/screen console now work simultaneously
- OFW Compilation process: Fixes to make gunzip work with gcc 4
- OFW Compilation process: Built from open source svn upstream instead of from tarball
FIELD_MESSAGE_domrelorlae
Known issues
- Auto-repeat is slow on some USB keyboards
- NVRAM storage for configuration variables is not yet implemented.
- JFFS2 does not pay attention to the bad block table.
- JFFS2 does not handle ECC
- The boot menu is incomplete
- Dirctory symlinks have a problem.
ATest -- Infineon RAMs only
Thise is a special purpose image. Do not use except on A-test boards with Infineon RAMS.
For more info see Upgrading_to_LinuxBIOS#Checking_your_DRAM_type
MD5:
2331a33116b65bd885c1efcfdf02a6e7 olpc-Q2A53_CL2.5.rom