Release notes/10.1.3

  This page is monitored by the OLPC team.

  For the general public

NOTE: The contents of this page are not set in stone, and are subject to change! This page is a draft in active flux ... Please leave suggestions on the talk page.

Purpose

An update to software release 10.1.2 aiming to roll as many blockers and high bugs as possible along with activity improvements.

Installation

XO-1.5

How to install unsigned build os360-4g of release 10.1.3 on XO-1.5.

The build is installed to the internal microSD device. You will need a USB drive of at least 1 GB capacity, but only for the duration of the installation.

ALL USER DATA WILL BE ERASED FROM THE LAPTOP!

• Prepare the USB drive:
  • Download os360-4g.zd,
  • Save the file to the top directory of the USB drive,

• Prepare the laptop:
  • Make a copy of any data you wish to keep,
  • Obtain a Developer key and disable security,
  • Check the battery is inserted and locked,
  • Check that the power cord is in place and the battery indicator is green,
  • Turn off the laptop, unless it is already off,
  • Insert the USB drive into any USB port on the laptop,

• Start installing:
  • Obtain the Ok prompt,
  • Type the command:

fs-update u:\os360-4g.zd

Installation progress will be displayed. Green colour will fill grey blocks. It will take about ten minutes. Once finished, the Ok prompt will return. Remove the USB drive. The laptop must be rebooted using bye or the power button, not with the boot command. The USB drive can be used on other laptops.

XO-1

How to install unsigned build os360 of release 10.1.3 on XO-1.

The build is installed to the internal NAND flash device. You will need a USB drive of at least 1 GB capacity, but only for the duration of the installation.

ALL USER DATA WILL BE ERASED FROM THE LAPTOP!

• Prepare the USB drive:
  • Download os360.img,
  • Save the file to the top directory of the USB drive,
  • Download os360.crc,
  • Save the file to the top directory of a USB memory stick,
  • Check the USB drive contains at least the two files os360.img and os360.crc

• Prepare the laptop:
  • Make a copy of any data you wish to keep,
  • Obtain a Developer key and disable security,
  • Check the battery is inserted and locked,
  • Check that the power cord is in place and the battery indicator is green,
  • Turn off the laptop, unless it is already off,
  • Insert the USB drive into any USB port on the laptop,

• Start installing:
  • Obtain the Ok prompt,
  • Type the command:

copy-nand u:os360.img

Installation progress will be displayed. Green colour will fill yellow blocks. It will take about five minutes. Once finished, the Ok prompt will return. Remove the USB drive. The laptop may be rebooted. The USB drive can be used on other laptops.

Update

You may wish to update from a previous version of the operating system. This method preserves most user data, Sugar journal and installed Sugar activities, but does not preserve certain operating system customisations such as additional packages.

(Update is distinct from install. If you have followed the install procedures above, then you need not follow this section.)

Compatibility

A few previous versions do not support this method. Here are the known working update combinations:

• release 8.2.1 (build os802.img and gg-802-1.img) to release 10.1.3 on XO-1,
• release 10.1.0 to release 10.1.3 on XO-1.5,
• release 10.1.1 to release 10.1.3 on XO-1.5,
• release 10.1.2 to release 10.1.3 on XO-1.5.

Known Problems

After an operating system update there are a few known problems:

• all known wireless access points are forgotten, and you must choose an access point again,
• the "Journal is full" message is likely to appear if not enough space has been made prior to update, and you may need to remove journal entries, activities, or the previous operating system version to bring the system back to normal operation.

Preparation

To prepare for an operating system update:

• remove as much saved content as you no longer need,
• remove any large activities you no longer need, and;
• use Software update to ensure the Terminal activity is the latest available version.

Follow the instructions in one of the subsections below, according to which method and laptop model you are using.

Simple Online Update

• establish an internet connection from the laptop (if you plan to do online update),
• start the laptop normally,
• start the Terminal Activity, and depending on the laptop model type:

XO-1.5

sudo olpc-update 10.1.3_xo1.5-360

XO-1

sudo olpc-update 10.1.3_xo1-360

See Simple Online Update for more detail about the method.

Simple Offline Update

• download a .usb and .toc file,
  • for XO-1.5
    • os360.usb,
    • os360.toc,
  • for XO-1
    • os360.usb,
    • os360.toc,
• put them on a USB drive,
• boot the laptop normally,
• plug the USB drive into the laptop,
• start the Terminal Activity, and type:

sudo olpc-update --usb

See Simple Offline Update for more detail about the method.

New features

Collaborate without infrastructure on the XO-1.5

To mimic the mesh behavior on devices where mesh hardware is not available and make the "under a tree"-scenario possible the Sugar Ad-hoc networks have been added. The feature adds three default Ad-hoc networks, for channel 1, 6, and 11. They are represented with designated icons in the Neighborhood view.

Sharing/Backup Journal entries using a mass storage device

With build 10.1.3 we added back the possibility to share Journal entries with another learner of a mass storage device (e.g. USB-Stick). The user experience can be described as the following: Martin wants to give a picture he has been drawing to Simon. He plugs in his USB-stick and copies the Journal entry on the stick. The entry will be shown with Martin's XO color on the stick. Simon insert the stick and copies Martin's entry into his Journal. You can use this feature as well to backup Journal entries on a mass storage device.

Project Sugar from your XO onto a wall

We have been adding support for USB2VGA adapters in 10.1.3. This gives you the possibility to connect an XO with a projector over a USB2VGA adapter and project what is on your XO screen onto a wall.

• 

GNOME Breakability Issues -- options and actions breaking Gnome and Sugar

In 10.1.3 a focus was on making switching between Sugar and GNOME smooth and that settings a user does under GNOME has no side effect on Sugar and the other way around.

Activities

List to Edit:

• Browse: Busy indicator mouse cursor, home button, preview in downloaded images
• Paint: Clean up cursors, improved arrows and text tool, new effects (invert colors, mirror), show the pencil/brush size and shape, many UI fixes, copy and paste working.
• Read: use the DPAD in e-book mode.
• Write: Can copy and paste images from Browse, Paint and Browse. The images can be placed in tables. Can save the file like PDF.
• Wikipedia: Now is fast!
• Updates: We include the last versions of Physics, TurtleArt, Calculate, Pippy, Scratch and Etoys

Known Problems

• Sugar frame speaker icon does not reflect volume hot key usage #9913

See Release_notes/10.1.2#Known_Problems_2 prior release known problems.

Bugs fixed

sugar

os350

• Journal: Show alert when error occurs while writing to external devices <trac>10312</trac>
• AP: separate signal strength from status <trac>10347</trac>
• Add default Ad-hoc networks <trac>9845</trac>
• Connect to gabble immediately when possible <trac>10350</trac>
• Unable to register a laptop after trying on the wrong network <trac>6857</trac>
• Feedback when deleting files on an external device <trac>10351</trac>
• Do not break if the string contains no conversion specifier <trac>10372</trac>
• Save title when closing <trac>10346</trac>

os351

• Disable start option for entries that can't be opened <trac>8733</trac>
• Cleanup temporary files on startup <trac>10301</trac>
• restore sugar-launch by bundle id substring, fixes <trac>9189</trac>
• New go-home icon, needed by Browse <trac>10364</trac>
• Remove shared activity from the neighborhood view when no members left <trac>10308</trac>
• Deal with unicode nick names <trac>889</trac> (moved patch from rpm into repository)

os353

• Adapt bundleregistry to use the new activity version scheme <trac>10379</trac>
• Sugar Ad-hoc icons show in search results when connect/disconnect to AP OLPC <trac>10412</trac>
• Add new activity numbering scheme <trac>10379</trac>

os354

• Add new activity numbering scheme to the activity updater <trac>10397</trac>

os355

• bundlebuilder: install mimetypes.xml and associated icon <trac>10427</trac>
• Apply new version scheme as well to content bundles <trac>10379</trac>

os357

• Convert Journal entries that have been saved to a storage device in 0.82 <trac>9658</trac>
• Possibility to share Journal entry using a storage device <trac>9657</trac>
• Adjust copyright in Control Panel <trac>10273</trac>
• Journal bundle removal won't remove installed activity <trac>10486</trac>

olpc-kbdshim

os351

• dpad rotates wrong <trac>10380</trac>

olpc-powerd

os351

• avoids resume from suspend when lid opens <trac>10402</trac>

os354

• Better collaboration support when idle suspend is enabled <trac>9535</trac>
• Do not wake up on lid open on XO-1 <trac>10424</trac>

os357

• better power logging

olpc-utils

os352

• add config for screen rotation (part of <trac>9350</trac>)
• Enable SiSUSB support (part of <trac>10210</trac>)

squeak-vm

• Remove MySqueak option from GNOME <trac>9785</trac>

kernel

os354

• Support for uvcvideo <trac>10378</trac>
• Lid wakeups on XO-1 are now implemented via new /sys/power/wake-on-lid node <trac>10398</trac>, <trac>10399</trac>, <trac>10424</trac>

xorg-x11-drv-openchrome

os351

• Screen rotation support for XO-1.5 <trac>9350</trac>

xorg-x11-drv-sisusb

os352

• Make SISUSBVGA devices trivial to use <trac>10210</trac>

Browse

os351

• Browse has no "busy" indication <trac>10383</trac>

os353

• Web activity uses gettext on file name <trac>6874</trac>
• History not right when resuming activity <trac>10437</trac>
• Add Home Button in Browse <trac>10364</trac>
• Browse fails to download some files with non-ascii characters <trac>8857</trac>
• Can not save pictures from the olpc library with Browse to Journal <trac>10365</trac>
• Palettes in Browse do not always go away <trac>10407</trac>

Distance

os353

• Changes ringdown values for mor stable meassures (part of <trac>10122</trac>)

Paint

os353

• Use new colorchooser (still use ColorSelector for <= 0.82) <trac>1015</trac>
• Fixed aspect ratio mode for Shape tools <trac>3705</trac>
• New suggestion for arrow drawing in Paint <trac>4170</trac>
• Changes made to save the last added text item <trac>5917</trac>
• Paint - Rect. Marquee icon changes erratically <trac>5882</trac>
• Implemented Mirroring Effect in Paint Activity - SL#2463
• Added Invert Color Effect to Paint Activity - <trac>2495</trac>
• Title for 'Rectangualar Marquee' tool changed to 'Select Area' - SL #2266
• Paint starts with a random color selected SL #2053
• Paste images from clipboard - SL #813, <trac>9022</trac>
• paint overwrites file type instead of creating new file - SL #1771
• Slider bar should change brush and line width - <trac>8865</trac>
• Tools & Shapes would be a radio button set - <trac>3695</trac> and <trac>3694</trac>
• Active point of Paint pointers should be at tip of penscil, brush, drip on fill bucket, etc - SL #296
• The free form polygn tool should be in the shapes toolbar - <trac>3693</trac>
• turn off activity sharing - SL #1863
• Make "keep aspect ratio" selection visible in the UI. - SL #931
• Under tools tab, pencil size funcionality is not working - SL #1902
• Change in the icon activity to avoid errors in new librsvg
• Clean up cursors
• Add binary files to python 2.7

Write

os353

• Change the default method to insert images <trac>3066</trac> and <trac>7405</trac>. This adds a checkbox to enable the user to select the method
• Preserve the mime type when reading and saving files. Related to tickets <trac>8972</trac>, <trac>5291</trac>, <trac>1925</trac> and SL #2127.
• Add option to export to PDF - SL #1458
• Paste images in write <trac>2507</trac> and <trac>7186</trac>. Now you can copy an image from Paint, Browse or Write and paste in Write.

os354

• Don't set the activity metadata property when save PDF file because Write can save PDF files but can't open them <trac>10442</trac>
• The mime types from files rtf and html have text/plain in mime_parents. We need to modify the criteria to open them like rich text <trac>8972</trac>

Read

os353

• Add scrolling options for PDFs <trac>10396</trac>

Help

os353

• Fix permissions for HTML pages: use 0644
• Fix icon for F13 changes in rendering <trac>8513</trac>
• Use go-home icon <trac>8575</trac>, <trac>10267</trac>
• Add view toolbar, with zoom in, zoom out and full screen buttons
• Remove width from content section in css to improve screen usage
• Merge with latest XO 1.5 branch

Pippy

os353

• Cannot start "Thanks" example <trac>10384</trac>
• Add EditToolbar & modify toolbars for <=0.84 compatibility <trac>10395</trac>
• Fix svg icons for Pippy
• Remove the 'dobject'/groupthink submodule
• Switch activity.info from class to exec

Memorize

• Game not transferred when loading a created game <trac>10302</trac>

Etoys

• added translation: hi, ta
• update translations: de, mn, vi
• use compressed sources file (EtoysV4.stc) To take up less space on machines with a non-compressing file system (i.e., about anything except XO-1, but in particular the XO-1.5) this version uses a compressed sources file (before: 18 MB, now: 4.5 MB).

Sratch

• new camera plugin 0.8, fixes import from camera on XO-1 <trac>10413</trac>

Physics

• Fix for cpu idling events when in background special case for Sugar 0.84.
• Physics now idles when in the background to free up the cpu and save power.
• Saves thumbnail image of simulation for details view in Journal.
• Better behaviour when attempting to create minimum sized triangles, boxes, and circles (SL#1249).
• Fixed new toolbars expanding separator from overflowing the Stop icons off the XO toolbar
• Fixed the python/gtk/pygame int/float bug affecting F14 based builds (SL#2363).
• Includes latest translations.
• Switch activity.info from using the depreciated class, to exec.
• Source code clean-up.
• Added support for new toolbar design for Sugar 0.86 (old toolbars still work for Sugar 0.84 and back)
• Objects can now be moved with the Grab tool while the simulation is paused!
• Tool code cleanup and refactoring
• Includes latest translations

Turtle Art

Bug Fixes:

• Refactoring of audio/video code based on Jukebox (#1613)
• Catch depreciated format during project load (#2501, #2447)
• Reorganized some palettes (flow, portfolio) to fit smaller screen sizes
• Map mouse coordinates to screen coordinates (#2502)
• Also closed #2490, #2475, #2449, and #1057

Enhancements:

• Sample Python code stored in individual files
• New sample Python code (#548): (copy/paste heap to/from clipboard and to/from Journal)
• Sensor calibration for XO 1.5 hardware (Tony Forster)
• Text-only support for RTF files (#893)
• Block at bottom of stack is hidden when stack is 'collapsed' (#2506)
• Palette hides on repeat click of selector (#2505)
• Elimination of redundant Hide Palette button (#2505)
• Spanish translation of new blocks

Jukebox

• New translations updated in this release