XFCE: Difference between revisions

From OLPC
Jump to navigation Jump to search
 
(42 intermediate revisions by 27 users not shown)
Line 1: Line 1:
[http://www.xfce.org/ Xfce] is a lightweight but powerful desktop environment that will work well on the XO. The following is a tutorial for using Xfce on the XO based on the article from the [http://www.freelikegnu.org/?p=13 Free Like GNU] article and several forum posts. For a more-integrated Sugar/XFCE experience, see the [[XFCE and Sugar]] article.
[http://www.xfce.org/ Xfce] is a lightweight but powerful desktop environment that will work well on the XO. The following is a tutorial for using Xfce on the XO based on the article from the [http://www.freelikegnu.org/?p=13 Free Like GNU] article and several forum posts. For a more-integrated Sugar/XFCE experience, see the [[XFCE and Sugar]] article.

==Preamble==

Please read the following steps before proceeding to make sure you understand what is involved! We take no responsibility for you making your XO unbootable. Although the process is reasonably safe for your XO, you should be able and willing to follow the [[clean-install procedure]] from a USB flash drive in case you get into trouble!

Please also note that xfce and other third-party modifications to your XO (basically anything that is not a .xo bundle application) may be rendered inoperative when you upgrade the base OS to a new build (<trac>6317</trac>).


== Instructions ==
== Instructions ==
=== Get Root ===
=== Get Root ===
Establish a connection to the internet. You will need the ability to connect to the internet to retrieve and update files from the OPLC's repositories. "yum" is the command that will retrieve the files you request and it will automatically install them. You will need to have "root" access to use yum.
Establish a connection to the internet. You will need the ability to connect to the internet to retrieve and update files from the OPLC's repositories. [[yum]] is the command that will retrieve the files you request and it will automatically install them. You will need to have [[root]] access to use yum.


If you can't get an internet connection first because of missing WPA encryption, follow WPA instructions first. These even work with Sugar.
If you can't get an internet connection first because of missing WPA encryption, follow WPA instructions first. These even work with Sugar.


Get "root": Use the terminal activity and type <code>su</code> at the prompt and hit the return key. Your command prompt will now end with "#" this means you have "root" and can change any file on the computer.
Get "root": Use the [[Terminal Activity]] and type <code>su</code> at the prompt and press the [enter] key. Your command prompt will now end with "#" this means you have "root" and can change any file on the computer.
$ su
$ su
#
#
Line 19: Line 13:
=== Install Packages ===
=== Install Packages ===


Install xfce, this will give you a very basic desktop environment and the ability to customize it. This will download about 40MBs to RAM then install the files automatically. Make sure, no other Activity is running. Otherwise during installation you will get 'error: can't allocate memory'. To proceed, stop Terminal Activity, reboot, restart the process. If you get a "Socket Error" that returns you to a prompt, use the up arrow to restore your original command and enter to restart the process.
Install xfce, this will give you a very basic desktop environment and the ability to customize it. This will download about 40MBs to RAM, and then install the files automatically. Make sure that no other Activity is running. Otherwise during installation you will get an 'error: can't allocate memory'. To proceed, stop the Terminal Activity, reboot, restart the process. If you get a "Socket Error" that returns you to a prompt, use the up arrow to restore your original command and enter to restart the process.


# yum install xfdesktop xfce-utils xfce-mcs-plugins xfce4-session
# yum install xfdesktop xfce-utils xfce-mcs-plugins xfce4-session xfce4-icon-theme
Optional packages: xmms (audio player), orage (calendar), xfce-mixer (volume control), system-config-date (set datetime/timezone), genmon (generic monitor - can be used to output battery status, for example), systemload (shows CPU and memory usage)
Optional packages: xmms (audio player), orage (calendar), xfce-mixer (volume control), system-config-date (set date/time/timezone), genmon (generic monitor - can be used to output battery status, for example), systemload (shows CPU/Memory usage)
# yum install xmms orage xfce4-mixer system-config-date xfce4-genmon-plugin xfce4-systemload-plugin
# yum install xmms orage xfce4-mixer system-config-date xfce4-genmon-plugin xfce4-systemload-plugin


=== GDM (gnome display manager) ===
if you want to have your own login screen (users acounts)


* IT DOES NOT WORK WITH BUILD 767 as it fails to find dep libglade or sometin i cant install it it need deps they need deps. this seems to work with build 703 (yum version 8) not with 767 (yum version 19)
=== Install Firefox 2 ===
in fact system-config-date dont install any more.
Installing Firefox 2 requires that you remove its exclusion from the XO's repository list

simply do this
# su
# yum install gdm
let it install after it installs do this
# nano /etc/inittab
replace the end line on the file with this
# x:5:respawn:/usr/sbin/gdm -nodaemon
do this now on the keyboard
# CTRL-ALT-ERASE
to restart xfce

NOTE: this is how to install it and get it to start auto on the desktop
you need to also install system-config-users you need and also you need to change the passwd for user root (you need to loginto the acount wifi-radar this not work with user olpc no permision) + the user root has tons of that tha you can do but in that user be carfull you do not erase the file system (i.m prety sure you cant rewright after that)

(oh the owner of this page you can delete this if you won't)
THIS WORKS
dont forget PASSWORDs install system-config-users like this
# su
# yum install system-config-users
run as "root" (super user) change the password for users you can add or remove but remember a once you do this wifi-radar will only start to user "root". This is just telling you how to have more then one user

(if you have any questions e-mail me at everett95@gmail.com)

NEW UPDATE GDM DOES NOT WORK RIGHT IN BUILD 767 (FEDORA 9) SORRY.

=== Fix Problems With Install ===
In the recent build olpc put a block on the install of most things causing issues with installing abiword and system-config-date and issues causing "yum update" to fail with NetworkManager. I have found a way to stop these (there are two ways) here are the ways to do it
<br><br>Option '''1'''<br>
# sudo nano /etc/yum/olpc-exclude
: you can erase it or in the file you will see a big list of programs DELETE all but the
# exclude=
: line it will look like that<br>
Option '''2'''<br>
: in the repos for yum file (/etc/yum.repos.d/) check throw all of them DELETE
: if you see this line it should look like this
# include=file:///etc/yum/olpc-exclude
: I know it's in the FEDORA.repo file check
: this is how to fix the problem with most installation of firefox yum update etc. I hope this fixes the problem

(if you have any questions e-mail me at everett95@gmail.com)
I will be posting how to install a better wifi manager (no bugs) in a bit.
<br><br>
=== Fix Problems Installing Firefox ===
Installing Firefox requires that you remove its exclusion from the XO's repository list.
Open the repository file with the following command:
Open the repository file with the following command:
# nano /etc/yum.repos.d/olpc-koji-ship2.repo
# nano /etc/yum.repos.d/olpc-koji-ship2.repo
Line 34: Line 75:
Remove the <code>firefox</code> entry from the last line so it looks like this:
Remove the <code>firefox</code> entry from the last line so it looks like this:
exclude=seamonkey,mozplugger,kdebase,kernel
exclude=seamonkey,mozplugger,kdebase,kernel

then save using CTRL+X and confirm with "y"
then save using CTRL+X and confirm with "y"
Install Firefox 2 by running this command
Install Firefox by running this command:
# yum install firefox
# yum install firefox


Line 42: Line 84:


Firefox 3 needs a newer version of nss, so download the latest nss package:
Firefox 3 needs a newer version of nss, so download the latest nss package:
# wget ftp://ftp.univie.ac.at/systems/linux/fedora/updates/9/i386.newkey/nss-3.12.1.1-1.fc9.i386.rpm
# wget ftp://ftp.univie.ac.at/systems/linux/fedora/updates/9/i386.newkey/nss-3.12.2.0-1.1.fc9.i386.rpm
Use it to upgrade the version you already have
Use it to upgrade the version you already have
# rpm -vU nss-3.12.1.1-1.fc9.i386.rpm
# rpm -vU nss-3.12.2.0-1.1.fc9.i386.rpm
Install firefox
Install firefox
# yum install firefox
# yum install firefox


=== Install Opera Browser ===
=== Install Opera Browser ===
Installing Opera browser seems better for surf performance. Download (with Firefox) from www.opera.com/download > Other Versions > Linux i386 > Distribution > Other/Static RPM. Save the rpm-file to /home/olpc. Install with
Installing [[Opera]] browser seems better for surf performance. Download (with Firefox) from www.opera.com/download > Other Versions > Linux i386 > Distribution > Other/Static RPM. Save the rpm-file to /home/olpc. Install with
# su
# su
# rpm -vi opera (use tab to complete filename)
# rpm -vi opera (use tab to complete filename)
Run browser with Xfce menue Run Program > opera to test.
Run browser with Xfce menu Run Program > opera to test.


If you get the message "libqt-mt.so.3 is needed by opera", you may need to install the qt library:
If you get the message "libqt-mt.so.3 is needed by opera", you may need to install the qt library:
Line 65: Line 107:
# yum remove libabiword
# yum remove libabiword
# yum install abiword
# yum install abiword
Abiword is now installed under Xfce office menue.
Abiword is now installed under the Xfce office menu.


=== WICD wifi manager the best ===
This is instructions on how to install WICD wifi manager. This method will save a lots of problems in the future.
What!? Don't tell that WIFI-RADAR isn't working for ya! Well... Your in luck!
PLEASE INSTALL WICD INSTED OF WIFI-RADAR

And how to install it:

# su or sudo for all of it
# cd /usr/local/src
# wget http://downloads.sourceforge.net/wicd/wicd-1.6.2.2.tar.gz
# tar xf wicd-1.6.2.2.tar.gz
# cd ./wicd (use tab to finesh file name)
now to install just type
# python setup.py configure
# python setup.py install
if it says err blagh blagh just create the files/dir
with mkdir and nano

If you run into any trouble with the install process feel free to e-mail for help at: everett95@gmail.com

I can't guarantee this method will work (Posted back in 2008, SORRY for my spelling and grammar, I'm in grade nine now! It's been a long time and I have kind of lost my talent for XFCE. But I will try and help... If anyone even looks at this age anymore...


=== Manage WiFi Networks ===
=== Manage WiFi Networks ===
Line 205: Line 270:
/etc/dbus-1/system.d/nm-dhcp-client.conf
/etc/dbus-1/system.d/nm-dhcp-client.conf


In each file, change the line which reads <policy user="root"> to <policy user="olpc">. Then reboot.
In each file, copy the section of text which starts with <policy user="root"> and ends with </policy>.
Paste it immediately below the </policy> line, and change the <policy user="root"> line to <policy user="olpc">.

For example:
<policy user="root">
<allow own="org.freedesktop.nm_dhcp_client"/>
<allow send_interface="org.freedesktop.nm_dhcp_client"/>
</policy>

Becomes:
<policy user="root">
<allow own="org.freedesktop.nm_dhcp_client"/>
<allow send_interface="org.freedesktop.nm_dhcp_client"/>
</policy>
<policy user="olpc">
<allow own="org.freedesktop.nm_dhcp_client"/>
<allow send_interface="org.freedesktop.nm_dhcp_client"/>
</policy>

Then reboot.


====Trouble reconnecting====
====Trouble reconnecting====
Line 220: Line 304:
== Screen Brightness/Rotation, Sound Volume, and Battery Status Control ==
== Screen Brightness/Rotation, Sound Volume, and Battery Status Control ==


The following method is a simple method using a script. for a more detailed version, see [[Xfce keybindings]] for detailed instructions. This script has been reported several time to not work with build 703 or later installed. (Note 1: the problem appears to be a lack of visudo in olpc-sudo. I've gotten it to work by copying a working sudoers file to /etc. This is the file. http://www.filedropper.com/sudoers . (-- link is dead. re-upload please?) I copied the sudoers file before running the script, it may make a difference.)
The following method is a simple method using a script. for a more detailed version, see [[Xfce keybindings]] for detailed instructions. This script has been reported several times to not work with build 703 or later installed. (Note 1: the problem appears to be a lack of visudo in olpc-sudo. I've gotten it to work by copying a working sudoers file to /etc. This is the file. http://www.filedropper.com/sudoers . (-- link is dead. re-upload please?) I copied the sudoers file before running the script, it may make a difference.)


The keys on your XO can be easily made functional again by installing the rpm on this page: [http://favias.org/introducing-olpckeybind olpc-keybind]. This RPM contains the scripts to perform the operations and the instructions to configure your default olpc user account to use them.
The keys on your XO can be easily made functional again by installing the rpm on this page: [http://favias.org/introducing-olpckeybind olpc-keybind]. This RPM contains the scripts to perform the operations and the instructions to configure your default olpc user account to use them.
Line 226: Line 310:
This rpm depends on xbindkeys. Because this rpm doesnt yet exist in the official repositry you have to do the following in a terminal (as root) to install it:
This rpm depends on xbindkeys. Because this rpm doesnt yet exist in the official repositry you have to do the following in a terminal (as root) to install it:
yum install xbindkeys
yum install xbindkeys
rpm -Uhv http://favias.org/files/olpc-keybind-1-2.noarch.rpm
rpm -Uhv http://favias.org/sites/favias.org/files/olpc-keybind-1-2.noarch.rpm


To remove this functionality the following command as root in terminal will suffice:
To remove this functionality the following command as root in terminal will suffice:
Line 239: Line 323:


=== Displaying Battery Status in panel ===
=== Displaying Battery Status in panel ===
* Install [[http://www.favias.org/introducing-olpckeybind| olpc-keybind rpm]] for the battery-status binary it provides
* Install [http://www.favias.org/introducing-olpckeybind olpc-keybind rpm] for the battery-status binary it provides
* use genmon (see above) to display the battery status in a toolbar
* use genmon (see above) to display the battery status in a toolbar
** right-click on a blank spot on an Xfce toolbar, chose Add Item, select Generic Monitor and clicked Add
** right-click on a blank spot on an Xfce toolbar, chose Add Item, select Generic Monitor and clicked Add
Line 281: Line 365:
== Change default desktop ==
== Change default desktop ==


=== Turn Xfce to default desktop ===
[=== Turn Xfce to default desktop ===
In <code>/home/olpc/</code> create a copy of <code>.xsession-example</code> called <code>.xsession</code>:
In <code>/home/olpc/</code> create a copy of <code>.xsession-example</code> called <code>.xsession</code>:
#cp /home/olpc/.xsession-example /home/olpc/.xsession
#cp /home/olpc/.xsession-example /home/olpc/.xsession
Line 290: Line 374:
* use CTRL+X to save and exit
* use CTRL+X to save and exit
* use CTRL+ALT+BACKSPACE to restart X, starting Xfce
* use CTRL+ALT+BACKSPACE to restart X, starting Xfce
]{| class="wikitable"
|-
<blockquote>
! header 1
! header 2
! header 3
|-
| row 1, cell 1
| row 1, cell 2
| row 1, cell 3
|-
| row 2, cell 1
| row 2, cell 2
| row 2, cell 3
</blockquote>
<gallery>
Image:Example.jpg|Caption1
Image:Example.jpg|Caption2
</gallery>
|}


=== Turn back to XO Sugar desktop ===
=== Turn back to XO Sugar desktop ===
Line 304: Line 408:
Next, add the <code>sugar-xfce-control</code> package for a 'desktop switcher' control panel in Sugar. ([http://dev.laptop.org/~cscott/xfce/sugar-xfce-control-0.2-1.noarch.rpm rpm])
Next, add the <code>sugar-xfce-control</code> package for a 'desktop switcher' control panel in Sugar. ([http://dev.laptop.org/~cscott/xfce/sugar-xfce-control-0.2-1.noarch.rpm rpm])


next, add the <code>sugar-mcs-plugin</code> package to integrate the sugar control panel into XFCE's "Settings Manager". This allows you to switch back from XFCE to Sugar using the same mechanism you use to switch from Sugar to XFCE. ( [http://dev.laptop.org/~cscott/xfce/sugar-mcs-plugin-debuginfo-1.1.0-1.fc9.i386.rpm rpm])
next, add the <code>sugar-mcs-plugin</code> package to integrate the sugar control panel into XFCE's "Settings Manager". This allows you to switch back from XFCE to Sugar using the same mechanism you use to switch from Sugar to XFCE. ( [http://dev.laptop.org/~cscott/xfce/sugar-mcs-plugin-1.1.0-1.fc9.i386.rpm rpm])


next, add <code>Inherits=gnome</code> after the <code><nowiki>[Icon Theme]</nowiki></code> line in <code>/usr/share/icons/sugar/index.theme</code>, so that sugar's theme properly pulls in the gnome filemanager icons
next, add <code>Inherits=gnome</code> after the <code><nowiki>[Icon Theme]</nowiki></code> line in <code>/usr/share/icons/sugar/index.theme</code>, so that sugar's theme properly pulls in the gnome filemanager icons


next, add <code><nowiki>[ -f "$HOME/.xsession-xfce" ] && . "$HOME/.xsession-xfce"</nowiki></code> before <code>/usr/bin/ck-xinit-session</code> in <code>/usr/bin/olpc-session</code> in order to trigger xfce when it is selected.
next, add <code><nowiki>[ -f "$HOME/.xsession-xfce" ] && . "$HOME/.xsession-xfce"</nowiki></code> before the <code>exec /usr/bin/ck-xinit-session</code> line at the end of <code>/usr/bin/olpc-session</code> in order to trigger xfce when it is selected.


The last two steps are easy to mess up. Perhaps the best way to get those changes is to use the files provided in the zip file here: http://www.filedropper.com/xfce-sugarfiles , which also includes the rpms above (Please don't use sites like this for storing files, the files don't exist now). Or you can install the faster build and copy those two files to a usb drive. While you are at it, grab <code> /home/olpc/.xsession-sfce</code>. Then install the build of your choice, Follow the yum install and RPM install steps, then copy those files from the USB to the appropriate directories.
The last two steps are easy to mess up. Perhaps the best way to get those changes is to use the files provided in the zip file here: http://www.filedropper.com/xfce-sugarfiles , which also includes the rpms above (Please don't use sites like this for storing files, the files don't exist now). Or you can install the faster build and copy those two files to a usb drive. While you are at it, grab <code> /home/olpc/.xsession-sfce</code>. Then install the build of your choice, Follow the yum install and RPM install steps, then copy those files from the USB to the appropriate directories.
Line 334: Line 438:


===Learn Linux===
===Learn Linux===
After all, DO NOT forget you are half-blinded low-level hacking a machine designed for the rugged world with a sugared usability for small children... To do that, yes, you have to learn about Linux.
After all, DO NOT forget you are a half-blinded low-level noob hacking a machine designed for the rugged world with a sugared usability for small children... To do that, yes, you have to learn about Linux.


== References ==
== References ==

Latest revision as of 02:37, 19 January 2011

Xfce is a lightweight but powerful desktop environment that will work well on the XO. The following is a tutorial for using Xfce on the XO based on the article from the Free Like GNU article and several forum posts. For a more-integrated Sugar/XFCE experience, see the XFCE and Sugar article.

Instructions

Get Root

Establish a connection to the internet. You will need the ability to connect to the internet to retrieve and update files from the OPLC's repositories. yum is the command that will retrieve the files you request and it will automatically install them. You will need to have root access to use yum.

If you can't get an internet connection first because of missing WPA encryption, follow WPA instructions first. These even work with Sugar.

Get "root": Use the Terminal Activity and type su at the prompt and press the [enter] key. Your command prompt will now end with "#" this means you have "root" and can change any file on the computer.

$ su
#

Install Packages

Install xfce, this will give you a very basic desktop environment and the ability to customize it. This will download about 40MBs to RAM, and then install the files automatically. Make sure that no other Activity is running. Otherwise during installation you will get an 'error: can't allocate memory'. To proceed, stop the Terminal Activity, reboot, restart the process. If you get a "Socket Error" that returns you to a prompt, use the up arrow to restore your original command and enter to restart the process.

# yum install xfdesktop xfce-utils xfce-mcs-plugins xfce4-session xfce4-icon-theme

Optional packages: xmms (audio player), orage (calendar), xfce-mixer (volume control), system-config-date (set date/time/timezone), genmon (generic monitor - can be used to output battery status, for example), systemload (shows CPU/Memory usage)

# yum install xmms orage xfce4-mixer system-config-date xfce4-genmon-plugin xfce4-systemload-plugin

GDM (gnome display manager)

if you want to have your own login screen (users acounts)

  • IT DOES NOT WORK WITH BUILD 767 as it fails to find dep libglade or sometin i cant install it it need deps they need deps. this seems to work with build 703 (yum version 8) not with 767 (yum version 19)

in fact system-config-date dont install any more.

simply do this

# su 
# yum install gdm

let it install after it installs do this

# nano /etc/inittab 

replace the end line on the file with this

# x:5:respawn:/usr/sbin/gdm -nodaemon

do this now on the keyboard

# CTRL-ALT-ERASE

to restart xfce

NOTE: this is how to install it and get it to start auto on the desktop you need to also install system-config-users you need and also you need to change the passwd for user root (you need to loginto the acount wifi-radar this not work with user olpc no permision) + the user root has tons of that tha you can do but in that user be carfull you do not erase the file system (i.m prety sure you cant rewright after that)

(oh the owner of this page you can delete this if you won't) THIS WORKS dont forget PASSWORDs install system-config-users like this

# su
# yum install system-config-users

run as "root" (super user) change the password for users you can add or remove but remember a once you do this wifi-radar will only start to user "root". This is just telling you how to have more then one user

(if you have any questions e-mail me at everett95@gmail.com)

NEW UPDATE GDM DOES NOT WORK RIGHT IN BUILD 767 (FEDORA 9) SORRY.

Fix Problems With Install

In the recent build olpc put a block on the install of most things causing issues with installing abiword and system-config-date and issues causing "yum update" to fail with NetworkManager. I have found a way to stop these (there are two ways) here are the ways to do it

Option 1

# sudo nano /etc/yum/olpc-exclude 
you can erase it or in the file you will see a big list of programs DELETE all but the
# exclude=
line it will look like that

Option 2

in the repos for yum file (/etc/yum.repos.d/) check throw all of them DELETE
if you see this line it should look like this
# include=file:///etc/yum/olpc-exclude
I know it's in the FEDORA.repo file check
this is how to fix the problem with most installation of firefox yum update etc. I hope this fixes the problem

(if you have any questions e-mail me at everett95@gmail.com) I will be posting how to install a better wifi manager (no bugs) in a bit.

Fix Problems Installing Firefox

Installing Firefox requires that you remove its exclusion from the XO's repository list. Open the repository file with the following command:

# nano /etc/yum.repos.d/olpc-koji-ship2.repo 

NOTE: in the latest builds (here tested on candidate-691) the command should be:

# nano /etc/yum.repos.d/olpc-koji-update1.repo

Remove the firefox entry from the last line so it looks like this:

exclude=seamonkey,mozplugger,kdebase,kernel

then save using CTRL+X and confirm with "y" Install Firefox by running this command:

# yum install firefox

Install Firefox 3

The stable version of Firefox 3 is available only if you've updated your XO to an OS image which uses Fedora 9. Older OS images will probably want to install Firefox 2 instead. This is confirmed to work on build 767, but probably works on any OS version past Update 1.

Firefox 3 needs a newer version of nss, so download the latest nss package:

# wget ftp://ftp.univie.ac.at/systems/linux/fedora/updates/9/i386.newkey/nss-3.12.2.0-1.1.fc9.i386.rpm

Use it to upgrade the version you already have

# rpm -vU nss-3.12.2.0-1.1.fc9.i386.rpm

Install firefox

# yum install firefox

Install Opera Browser

Installing Opera browser seems better for surf performance. Download (with Firefox) from www.opera.com/download > Other Versions > Linux i386 > Distribution > Other/Static RPM. Save the rpm-file to /home/olpc. Install with

# su
# rpm -vi opera (use tab to complete filename)

Run browser with Xfce menu Run Program > opera to test.

If you get the message "libqt-mt.so.3 is needed by opera", you may need to install the qt library:

# su
# yum install qt
# ldconfig

Install Abiword

To remove the surgarized office version and replace it with a fully functional word program, install like

$ su
# rpm -e pyabiword
# yum remove libabiword
# yum install abiword

Abiword is now installed under the Xfce office menu.

WICD wifi manager the best

This is instructions on how to install WICD wifi manager. This method will save a lots of problems in the future.

What!? Don't tell that WIFI-RADAR isn't working for ya! Well... Your in luck!

PLEASE INSTALL WICD INSTED OF WIFI-RADAR

And how to install it:

# su or sudo for all of it 
# cd /usr/local/src 
# wget http://downloads.sourceforge.net/wicd/wicd-1.6.2.2.tar.gz
# tar xf wicd-1.6.2.2.tar.gz
# cd ./wicd (use tab to finesh file name)
now to install just type
# python setup.py configure
# python setup.py install 

if it says err blagh blagh just create the files/dir with mkdir and nano

If you run into any trouble with the install process feel free to e-mail for help at: everett95@gmail.com

I can't guarantee this method will work (Posted back in 2008, SORRY for my spelling and grammar, I'm in grade nine now! It's been a long time and I have kind of lost my talent for XFCE. But I will try and help... If anyone even looks at this age anymore...

Manage WiFi Networks

You can use wifi-radar to manage your wireless connection within xfce.

# yum install wifi-radar

You can run wifi-radar through the xfce menu under "Networking". After running it once, a file will be created at /etc/wifi-radar/wifi-radar.conf. Open this file in a text editor, and change the line which reads:

interface = eth1

to read:

interface = eth0

Now, running wifi-radar should allow you to see the available wireless networks and connect to one. You may need to disable the default wireless network manager, by running:

# /etc/init.d/NetworkManager stop

You can permanently disable network manager by

# /sbin/chkconfig NetworkManager off

If you want to run wifi-radar as a daemon which will automatically connect to a preferred network:

$ wifi-radar -d

You should start the daemon with Xfce settings Auttostarted Applications using command /usr/sbin/wifi-radar -d

Manage WPA2 and WPA Keys with XFCE

You can connect to Wireless Access Points using WPA and WPA2 keys. Following solution don't require wifi-radar, thus work stand-alone for preferred WiFi-connection. This method, once applied, even works with Sugar persistently.

Add WPA Keys

Prepare your wireless network configuration. Edits can be added muliple for various connection types.

# nano /etc/wpa_supplicant/wpa_supplicant.conf 

Adding following lines for WPA2 or WPA1 keys

WPA2 Connect Entry

network={
	ssid="MyHome WiFi Name"
	scan_ssid=1
	proto=RSN
	key_mgmt=WPA-PSK
	pairwise=CCMP
	group=CCMP
	psk="My Paraphrase"
}

WPA1 Connect Entry

network={
       ssid="MyHome WiFi Name"
       scan_ssid=1
       proto=WPA
       key_mgmt=WPA-PSK
       pairwise=CCMP TKIP
       group=CCMP TKIP
       psk="My Paraphare"
}

Using WPA, options pairwise and group may vary between 'CCMP' or 'TKIP'. Get Wireless Access Point settings by running command line program 'iwlist scanning', looking for preferred wifi connection. 'CCMP' seems preferrable.

Edit sysconfig

Edit file

# nano /etc/sysconfig/wpa_supplicant 

Read line INTERFACE="-iwlan0". Set to

INTERFACES="-ieth0"

Restart eth0

For some reason you must reset network device while booting.

# nano /etc/rc.local

After read "touch /var/lock/subsys/local" insert

ifdown eth0
ifup eth0

Disable NetworkManager

Disable network manager permanently by

# /sbin/chkconfig NetworkManager off

Sugar Notice: NetworkManager manages Sugars 'Neigbourhood'. Once turned off, Neigbourhood will stay empty. But you'll win a 'hidden' stable and persistent WiFi connection instead. When turned on again, NetworkManager ask for password, which fails. Turn off again and reboot to connect.

Install wpa_supplicant demon

Enable wpa_supplicant permanently by

# /sbin/chkconfig --level 2345 wpa_supplicant on

Your system must be rebooted to access the web.

Enable wpa_supplicant temporarily and test by

# wpa_supplicant -Dwext -ieth0 -c/etc/wpa_supplicant/wpa_supplicant.conf &
# iwconfig

Xfce startup message

While launching Xfce there is a dhcp warning 'Could not lookup <hostname>'. You could continue anyway. To get rid of this nagging message, or if you are running Wifi-Radar, you should follow the instructions given! In the warning message, there is a hostname named 'dhcppc1' or similar. Insert this given hostname in your systems hosts-list

# nano /etc/hosts

Insert line read

# 127.0.0.1 dhcppc1

Wifi-Radar setting

You need Wifi-Radar only if you move between different networks. Wifi-Radar with WPA keys IS working, roughly. First of all, Wifi-Radar only runs with root privilege! That means, on XO you cannot run WR from the XFCE menue. In XFCE, open a terminal window, get root and start

# su
# wifi-radar 

Now, check your preferred WPA network - the one you installed before - and click Edit. Set

Use WPA 
 Driver: wext
Connection commands
 Before: ifup eth0
 After: ifdown eth0

Save changes. Close program, start again in the terminal. Now try to disconnect and connect. If Wifi-Radar get hooked, just kill it in the terminal window by pressing CTRL + C twice. In the terminal window, you can see WR acting. If it is allright, end WR with the Close-Button. For some reason, after you 'touched' WR once per session with root in the terminal window, you can now start WR with XFCE menue. If you want to connect to another network listed, you must edit according profile. If you want to connect to another WPA network, you must add an entry in the wpa_supplicant.conf. (There may be some ways to use visudo to avoid root.)

Using nm-applet instead of Wifi-Radar in xfce

With the xfce desktop, one can use nm-applet to connect much more easily to a variety of wifi-hotspots. I find it to be much easier to set up than wifi-radar.

Setting up nm-applet

  1. Connect to some sort of wifi hotspot, any way you can. You could also use a usb key, but it is easier to explain with yum
  2. download nm-applet. As root, yum install NetworkManager-gnome --enablerepo=fedora
  3. download some gnome UI elements yum install libgnomeui download is less than 4 megs
  4. add nm-applet & to your .xsession file found at /home/olpc/.xsession
  5. undo your wifi radar, wpa supplicant, or any other hacks you did to connect to the internet. nm-applet uses the same setup as sugar default. Make sure you turn NetworkManager back on
  6. restart, and enjoy nm-applet!

NOTE: IF you get an error(something about d-bus) just ignore it, nm-manager should still work.

NOTE 2: With Build 656 it seems impossible to install NetworkManager-gnome because of lacking dependencies relating 'redhat-artwork'. If this is the case, find a Fedora 7 RPM (link) and install using an RPM and the --nodeps flag

NOTE 3: Update 06/30/2008 by a user. Once I installed XFCE I couldn't get internet working. Wifi-radar wouldn't get an IP from my router. I had to get NetworkManager from the link above on another computer and put it on a flash drive. After installing it, I couldn't get it to autorun. But, I figured it out from a post on Linuxlore. I had to copy /usr/share/gnome/autostart/nm-applet.desktop to /etc/xdg/autostart/. Then, I had to edit the new nm-applet.desktop file and change 'OnlyShowIn=GNOME;' to 'OnlyShowIn=GNOME;XFCE;'. Now it runs on startup.

NOTE 4: I have nm-applet working just fine on build 711. I had to manually install the rpm like above. Once installed I found that it would complain it couldn't save anything until gnome-keyring-daemon is started. So under xfce menu -> settings -> Autostarted Applications add first 'gnome-keyring-daemon' (minus the puotes of course) and second 'nm-applet --sm-disable' (--sm-disable is very important. If you don't add that option you'll end up with multiple nm-applet running). Restart and you should see nm-applet on your panel. The first time you try to connect it will ask you for a new keyring password, choose one and off you go. I still get the occasional D-BUS error after connecting, but otherwise, it connects just fine and remembers my settings/passwords.

Notes for build 767

When trying to launch nm-applet from the command line as a non-root user, it may fail with this error:

nma_dbus_init(): could not acquire its service. nma_dbus_init (): could not acquire its service. dbus_bus_acquire_service() says: 'Connection ":1.38" is not allowed to own the service "org.freedesktop.NetworkManagerInfo" due to security policies in the configuration file'

This is because the security policy has been configured to allow the root user to run nm-applet, not the olpc user. This can be worked around by running "sudo nm-applet" from a terminal, however this will not successfully autorun on startup. To allow the olpc user to run nm-applet on startup, edit the following files:

/etc/dbus-1/system.d/NetworkManager.conf

/etc/dbus-1/system.d/NetworkManagerInfo.conf

/etc/dbus-1/system.d/nm-applet.conf

/etc/dbus-1/system.d/nm-avahi-autoipd.conf

/etc/dbus-1/system.d/nm-dhcp-client.conf

In each file, copy the section of text which starts with <policy user="root"> and ends with </policy>. Paste it immediately below the </policy> line, and change the <policy user="root"> line to <policy user="olpc">.

For example:

<policy user="root">
  <allow own="org.freedesktop.nm_dhcp_client"/>
  <allow send_interface="org.freedesktop.nm_dhcp_client"/>
</policy>

Becomes:

<policy user="root">
  <allow own="org.freedesktop.nm_dhcp_client"/>
  <allow send_interface="org.freedesktop.nm_dhcp_client"/>
</policy>
<policy user="olpc">
  <allow own="org.freedesktop.nm_dhcp_client"/>
  <allow send_interface="org.freedesktop.nm_dhcp_client"/>
</policy>

Then reboot.

Trouble reconnecting

nm-applet seems to suffer from the same issue of corrupted wifi password file (networks.cfg) which plagues sugar. Here's my attempt at a work around.

  1. On a toolbar in xfce, create a launcher (right click a toolbar, hit add) which runs the text rm /home/olpc/.sugar/default/nm/networks.cfg in the terminal (check the box when creating it) you only need to do this once!
  2. right click nm-applet in your systray, and click "disable wireless." right click again and click "disable networking"
  3. click your launcher to delete the networks.cfg file. You could also open a terminal and paste rm /home/olpc/.sugar/default/nm/networks.cfg into the terminal
  4. Then, right click nm-applet and restart networking, wireless
  5. click on nm-applet and "connect to other network" Manually type in your wireless network name and password, do not click on your wireless in the drop down if you see it. Sometimes it works, and sometime it doesn't, so inputting manually seems to work more often.
  6. you should be connected!

Screen Brightness/Rotation, Sound Volume, and Battery Status Control

The following method is a simple method using a script. for a more detailed version, see Xfce keybindings for detailed instructions. This script has been reported several times to not work with build 703 or later installed. (Note 1: the problem appears to be a lack of visudo in olpc-sudo. I've gotten it to work by copying a working sudoers file to /etc. This is the file. http://www.filedropper.com/sudoers . (-- link is dead. re-upload please?) I copied the sudoers file before running the script, it may make a difference.)

The keys on your XO can be easily made functional again by installing the rpm on this page: olpc-keybind. This RPM contains the scripts to perform the operations and the instructions to configure your default olpc user account to use them.

This rpm depends on xbindkeys. Because this rpm doesnt yet exist in the official repositry you have to do the following in a terminal (as root) to install it:

yum install xbindkeys
rpm -Uhv http://favias.org/sites/favias.org/files/olpc-keybind-1-2.noarch.rpm

To remove this functionality the following command as root in terminal will suffice:

yum remove olpc-keybind xbindkeys

Screen brightness did not initially adjust, as root you have to:

chmod a+rw /sys/class/backlight/dcon-bl/brightness 
chmod a+rw /sys/class/backlight/dcon-bl/max_brightness

On error 'scriplet failed' run as root /usr/bin/olpc-keybind manually. Run xbindkeys & for testing. If xbindkeys is giving you errors you may need to open olpc-keybind and change all references .xbindkeysrc from "/home/olpc/.xbindkeyssrc" to "/root/.xbindkeysrc". If everything works, add /usr/bin/xbindkeys to Xfce Autostarted Applications via Setting Menue.

Screen rotation does not automatically resize the windows. If you are using fullscreen mode this may be fixed by pressing Alt-F11 twice.

Displaying Battery Status in panel

  • Install olpc-keybind rpm for the battery-status binary it provides
  • use genmon (see above) to display the battery status in a toolbar
    • right-click on a blank spot on an Xfce toolbar, chose Add Item, select Generic Monitor and clicked Add
    • right-click the new Generic Monitor item, select Properties, and apply the following settings:
      • Command: battery-status
      • Label: B
      • Period: 300

Another option is to create a small script in /home/olpc called battery.sh (or whatever you would like) with the following line in it:

"echo hal-device | grep charge_level.percentage | sed 's/$/%/' /sys/devices/platform/olpc-battery.0/power_supply/olpc-battery/capacity"

save this script and make sure that the user 'olpc' owns it (chown olpc /home/olpc/battery.sh) and it is executable (chmod +x /home/olpc/battery.sh) Then...

    • right-click on a blank spot on an Xfce toolbar, chose Add Item, select Generic Monitor and clicked Add
    • right-click the new Generic Monitor item, select Properties, and apply the following settings:
      • Command: /home/olpc/battery.sh
      • Label: B
      • Period: 300

Getting normal fonts for web browsing, xfce desktop

If you think your fonts look a little funny on xfce, you may appreciate more "typical" fonts for your web browser and your desktop. However, this is not entirely "free," but the package itself is distributable for free

  1. Download the mscorefonts rpm from this website Mscorefonts rpm
  2. open a terminal as root, in the folder you downloaded the rpm to, and type: rpm -i Micro Pressing tab should auto-complete the file name
  3. restart your computer.

Alternatively, you could install the Liberation Fonts package. These are non-proprietary, unlike the Microsoft fonts. There are three fonts included which are metrically equivalent to Arial, Times New Roman and Courier New.

The rpm is available here.

Also, you can change your default user interface fonts in the Xfce "User interface settings" and changing the font to a size you recognize. You may set Font DPI to 150. It's also good to turn on anti-aliasing (slight).

Mounting Removable Filesystems

  1. Insert SD card or usb drive.
  2. Run thunar, the Xfce File Manager.
  3. The removable media should appear in the left-hand column. Click on it to mount it. A df will show that it has been mounted in the appropriate place (/mount/VOLUME_NAME)
  4. To unmount, right click on the media name in the same place and choose unmount.

Change default desktop

[=== Turn Xfce to default desktop === In /home/olpc/ create a copy of .xsession-example called .xsession:

#cp /home/olpc/.xsession-example /home/olpc/.xsession

Edit the .xsession file to launch Xfce on startup:

# nano /home/olpc/.xsession

Find the commented line that reads #exec xterm - below that line, add the following code:

exec startxfce4
  • use CTRL+X to save and exit
  • use CTRL+ALT+BACKSPACE to restart X, starting Xfce

]{| class="wikitable" |-

! header 1 ! header 2 ! header 3 |- | row 1, cell 1 | row 1, cell 2 | row 1, cell 3 |- | row 2, cell 1 | row 2, cell 2 | row 2, cell 3

|}

Turn back to XO Sugar desktop

To make the original XO Sugar desktop the default boot again, rename the .xsession file to anything other than .xsession (.xsession.xfce for instance). Applied changes, e.g. networking, may stay persistent.

Install Sugar/XFCE Control Panel

c-scott has created a script that switches between the XFCE desktop and sugar using the sugar control panel. This works in any joyride build, and the 8.2-760 test build. It comes pre-installed on the faster branch of the joyride build.

Assuming you have xfce installed, next get the gnome icon theme with

yum install gnome-icon-theme

Next, add the sugar-xfce-control package for a 'desktop switcher' control panel in Sugar. (rpm)

next, add the sugar-mcs-plugin package to integrate the sugar control panel into XFCE's "Settings Manager". This allows you to switch back from XFCE to Sugar using the same mechanism you use to switch from Sugar to XFCE. ( rpm)

next, add Inherits=gnome after the [Icon Theme] line in /usr/share/icons/sugar/index.theme, so that sugar's theme properly pulls in the gnome filemanager icons

next, add [ -f "$HOME/.xsession-xfce" ] && . "$HOME/.xsession-xfce" before the exec /usr/bin/ck-xinit-session line at the end of /usr/bin/olpc-session in order to trigger xfce when it is selected.

The last two steps are easy to mess up. Perhaps the best way to get those changes is to use the files provided in the zip file here: http://www.filedropper.com/xfce-sugarfiles , which also includes the rpms above (Please don't use sites like this for storing files, the files don't exist now). Or you can install the faster build and copy those two files to a usb drive. While you are at it, grab /home/olpc/.xsession-sfce. Then install the build of your choice, Follow the yum install and RPM install steps, then copy those files from the USB to the appropriate directories.

Trouble?

Defreeze Boot Animation

If you reboot and get stuck at the XO logo (with circle around it), hold down power to shutdown then power up again.

Warning! This is advanced and can potentially screw up your boot. To bypass the boot anim manually, hold down the checkmark while turning the OLPC on, then wait for the machine to tell you to release it.

You can prevent boot freezing by disabling the startup logo animation:

  • Open the startup animation logo file /etc/init.d/0-boot-anim-start
  • Above the line saying "# i'm the child", change

if os.fork() == 0:

to

if os.fork() == 'debug':

to prevent the animation code from being executed. Other methods than this one may cause trouble.

XO Wipeout

This document is under continued construction and may contain malicious strategies. In case of major trouble be prepared to wipe out your XO with an USB-Stick. This will clearly erase all data and any changes. Read and understand instructions following Secure Upgrade first, before apply major changes to XO.

Learn Linux

After all, DO NOT forget you are a half-blinded low-level noob hacking a machine designed for the rugged world with a sugared usability for small children... To do that, yes, you have to learn about Linux.

References

See also

  • OpenBox, a faster window manager with a more complicated install process on the XO.