Wireless access point compatibility: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
(75 intermediate revisions by 41 users not shown) | |||
Line 1: | Line 1: | ||
A list of wireless routers that had been tested for compatibility with the XO Laptop. Most are no doubt no longer available; the market for these products moves reasonably quickly. |
|||
{|class="wikitable" |
|||
{|class="wikitable sortable" |
|||
|+ '''Wireless Access Point Compatibility''' |
|+ '''Wireless Access Point Compatibility''' |
||
|- |
|- |
||
Line 6: | Line 8: | ||
!Firmware |
!Firmware |
||
!Tested |
!Tested |
||
!XO+Build |
|||
!Notes |
!Notes |
||
|- |
|||
|- |
|||
| [http://www.2wire.com 2Wire] |
|||
| 2700HG-B GATEWAY |
|||
| 4.25.19 |
|||
| Unsecured |
|||
| |
|||
| Didn't work / couldn't find on channel 4. Changed to channel 5 and XO found it and connected just fine. Unsecured network. |
|||
|- |
|||
| [http://www.2wire.com 2Wire] |
|||
| 2701HG-B GATEWAY |
|||
| 5.29.109.5 |
|||
| Yes |
|||
| 767 |
|||
| No changes needed connects using auto with WEP. |
|||
|- |
|||
| [http://www.2wire.com 2Wire] |
|||
| 2701HG-B GATEWAY |
|||
| 5.29.109.11 |
|||
| Yes |
|||
| 821 |
|||
| Successfully connects when using "WPA-PSK and WPA2-PSK" authentication option. |
|||
|- |
|||
| [http://www.2wire.com 2Wire] |
|||
| 2701HG-B GATEWAY |
|||
| 5.29.47 |
|||
| Yes |
|||
| |
|||
| Had to change the internet mode from the default of 802.11b/g to 802.11g |
|||
|- |
|||
| [http://www.2wire.com 2Wire] |
|||
| 2701HG-G GATEWAY |
|||
| 5.29.115.5 |
|||
| Yes |
|||
| |
|||
| Yes with WEP. Never got the OLPC machine to connect when WPA2 encryption was used. |
|||
|- |
|||
| [http://www.2wire.com 2Wire] |
|||
| 3800HGV-B Gateway |
|||
| 5.29.105.76 |
|||
| Yes |
|||
| |
|||
| ATT Uverse supplied, changed WPA to WEP-open and assigned to channel 8 as opposed to Automatic |
|||
|- |
|||
| [http://actiontec.com Actiontec] |
|||
| MI424WR |
|||
| Unknown |
|||
| Yes |
|||
| |
|||
| WPA non-functional on update.1 |
|||
|- |
|||
| [http://www.airlink101.com Airlink 101] |
|||
| AR525W |
|||
| v1.0.50 |
|||
| Yes |
|||
| |
|||
| Used WEP-Open with 128-bit hex key password |
|||
|- |
|||
| [http://www.apple.com/ Apple] |
|||
| [http://www.apple.com/timecapsule/ Time Capsule] |
|||
| XO: [[OLPC_Firmware_q2e18|Q2E18]] |
|||
| No |
|||
| [[OS images|767]] |
|||
| WPA/WPA2 Channel 11 worked for me. Not tested with [[Manual Wireless Association|the scripts here]] |
|||
|- |
|||
| [http://www.apple.com/airportexpress/ Apple] |
|||
| AirPort Express |
|||
| 6.3 |
|||
| Yes |
|||
| |
|||
| For WEP provide and select: ASCII + Shared key |
|||
|- |
|||
| [http://www.apple.com/airportextreme/ Apple] |
|||
| AirPort Extreme |
|||
| 7.3.2 |
|||
| Yes |
|||
| 767 |
|||
| Tested WPA1 with [[Manual Wireless Association|the scripts here]] |
|||
|- |
|||
| [http://www.buffalotech.com/products/wireless/ Buffalo Tech] |
|||
| WHR-HP-G54 |
|||
| DD-WRT v24 (05/24/08) mini - build 9526 |
|||
| Yes |
|||
| 790 - Firmware Q2E24 |
|||
|Worked for WEP open with HEX AND with WPA2+tkip |
|||
|- |
|||
|[http://www.cisco.com/en/US/products/ps5861/index.html Cisco] |
|||
|AIR-BR1310G-A-K9-R |
|||
|12.3(8)JA |
|||
|Unsecured Only |
|||
| |
|||
|Works but radio must be set to channels 1, 6, or 11. I normally configure this device to automatically choose the least congested frequency, but in my office that ends up being something other than 1, 6 and 11 most of the time. Note also that activity sharing totally fails with this AP - nada, zip. |
|||
|- |
|||
| [http://www.conceptronic.net Conceptronic] |
|||
| C54BRS4A |
|||
| 1.00 |
|||
| Yes |
|||
| Joyride 2263 - Firmware Q2E12 |
|||
|Worked for WEP open with ASCII password. |
|||
|- |
|||
| [http://www.dlink.com/ D-Link] |
|||
| DAP-1150 |
|||
| Unknown |
|||
| No |
|||
| os201 - Firmware Q3A35 |
|||
| At least one user reported failure with this model in WEP mode. |
|||
|- |
|||
| [http://www.dlink.com/ D-Link] |
|||
| DIR-615 |
|||
| 2.20 |
|||
| Yes |
|||
| |
|||
| worked with WPA2 (personal) and the Wpa.sh script |
|||
|- |
|||
| [http://www.dlink.com/ D-Link] |
|||
| DIR-600 |
|||
| 2.03 |
|||
| Yes |
|||
| |
|||
| Tested with no security |
|||
|- |
|||
| [http://www.dlink.com/ D-Link] |
|||
| DIR-300 |
|||
| 1.04 |
|||
| Yes |
|||
| |
|||
| worked with WEP 128bit ASCII (only tried that one - on set channel 3). |
|||
|- |
|||
| [http://www.dlink.com/ D-Link] |
|||
| DWL-G730AP |
|||
| 2.00 |
|||
| Yes |
|||
| |
|||
| Worked with WEP 128 as an access point. |
|||
|- |
|||
| [http://www.dlink.com/products/?pid=292 D-Link] |
|||
| DWL2100AP |
|||
| unknown |
|||
| In field only |
|||
| |
|||
| This AP was tested and may be used in Nepal. It was also tested for Australia/Pacific Islands where it was unsuccessful and unable to allocate DHCP addresses. |
|||
|- |
|||
| [http://www.dlink.com/products/ D-Link] |
|||
| DWL2200P |
|||
| unknown |
|||
| In field only |
|||
| |
|||
| This AP was tested and may be used in Nepal |
|||
|- |
|||
| [http://www.dlink.com/products/ D-Link] |
|||
| DWL-G700AP |
|||
| Unknown |
|||
| Yes |
|||
| |
|||
| Works as Open System, without authentification, without WEP, Channel 3. WPA-PSK works with firmware 2.30. |
|||
|- |
|||
| [http://www.dlink.com/products/ D-Link] |
|||
| DWL3200P |
|||
| unknown |
|||
| In field only |
|||
| |
|||
| This AP was tested and may be used in Nepal |
|||
|- |
|||
| [http://www.dlink.com/products/?pid=470 D-Link] |
|||
| D-Link WBR-2310 |
|||
| 1.02 |
|||
| Yes |
|||
| |
|||
| Open/WEP/WPA2 working. WPA fails, see: <trac>7825</trac> |
|||
|- |
|||
| [http://www.fon.com/ FON] |
|||
| La Fonera 2100E |
|||
| Release: 0.7.1.2 |
|||
| Yes |
|||
| |
|||
| Security: WEP, Type: Open System, 64-bit key password |
|||
|- |
|- |
||
| [http://www.linksys.com Linksys] |
| [http://www.linksys.com Linksys] |
||
Line 12: | Line 219: | ||
| 1.01.22 |
| 1.01.22 |
||
| Yes |
| Yes |
||
| |
|||
| Tested with no security; also with WAP |
| Tested with no security; also with WAP |
||
|- |
|||
|- |
|||
| [http://www.linksys.com Linksys] |
|||
| BEFW11 S4 version 2 |
|||
| 1.45.10 |
|||
| Yes |
|||
| 650, 708, 2230 |
|||
| Tested with WEP 128-bit key. A few times with build 708 I had to return to [[Neighborhood View]] to reconnect after standby, and once I had to re-enter the hex key. |
|||
|- |
|- |
||
| [http://www.linksys.com Linksys] |
| [http://www.linksys.com Linksys] |
||
Line 18: | Line 234: | ||
| |
| |
||
| Yes |
| Yes |
||
| |
|||
| Tested with no security; also with WEP 128 passphrase. See [[Sharing_User_Experiences_with_OLPC_XO_Wifi_Connectivity_-_Glew_2007_Jan]] for trick. |
| Tested with no security; also with WEP 128 passphrase. See [[Sharing_User_Experiences_with_OLPC_XO_Wifi_Connectivity_-_Glew_2007_Jan]] for trick. |
||
Line 25: | Line 242: | ||
| 4.21.1 1/20/2007 |
| 4.21.1 1/20/2007 |
||
| Yes |
| Yes |
||
| |
|||
| Use channel 1, 6, or 11 (see [[Wifi_Connectivity#Channel]]). |
| Use channel 1, 6, or 11 (see [[Wifi_Connectivity#Channel]]). |
||
|- |
|- |
||
Line 31: | Line 249: | ||
| DD-WRT v23 SP2 micro |
| DD-WRT v23 SP2 micro |
||
| Yes |
| Yes |
||
| |
|||
| WEP connects fine all channels, WPA2 via wpa.sh script. |
| WEP connects fine all channels, WPA2 via wpa.sh script. |
||
|- |
|- |
||
| [http://www.linksys.com Linksys] |
| [http://www.linksys.com Linksys] |
||
Line 37: | Line 257: | ||
| OpenWRT WhiteRussian (RC4) |
| OpenWRT WhiteRussian (RC4) |
||
| Yes |
| Yes |
||
| |
|||
| tested using no security (MAC based access control) on channel 3 |
| tested using no security (MAC based access control) on channel 3 |
||
|- |
|||
| [http://www.linksys.com Linksys] |
|||
| WRT54GL |
|||
| OpenWRT Kamikaze 7.09~ |
|||
| Yes |
|||
| |
|||
| WPA works. |
|||
|- |
|- |
||
| [http://www.linksys.com Linksys] |
| [http://www.linksys.com Linksys] |
||
Line 43: | Line 274: | ||
| v4.30.11, Aug. 7, 2007 |
| v4.30.11, Aug. 7, 2007 |
||
| Yes |
| Yes |
||
| |
|||
| WPA2 via Wpa.sh, G-only on channel 6 |
| WPA2 via Wpa.sh, G-only on channel 6 |
||
|- |
|||
| [http://www.linksys.com Linksys] |
|||
| WRT110 |
|||
| v1.0.03 |
|||
| Yes |
|||
| |
|||
| Tested with no security and WPA2 using 256 bit key generated from passphrase & SSID |
|||
|- |
|- |
||
| [http://www.linksys.com Linksys] |
| [http://www.linksys.com Linksys] |
||
| WRT300Nv1.1 |
| WRT300Nv1.1 |
||
| 1.51.2 |
| 1.51.2 6/04/2007 |
||
| Yes |
| Yes |
||
| |
|||
| WPA2 via Wpa.sh, G-only on channel 11 |
| WPA2 via Wpa.sh, G-only on channel 11 |
||
|- |
|- |
||
| [http://www.linksys.com Linksys] |
| [http://www.linksys.com Linksys] |
||
Line 55: | Line 298: | ||
| |
| |
||
| Yes |
| Yes |
||
| |
|||
| WPA |
| WPA |
||
|- |
|- |
||
| [http:// |
| [http://www.linksys.com Linksys] |
||
| |
| WRT350N |
||
| |
| 1.03.7 |
||
| Unsecured |
|||
| Yes |
|||
| |
|||
| WEP or WPA both work on Update.1 |
|||
| Cannot connect using no security. |
|||
|- |
|- |
||
| [http://www. |
| [http://www.linksys.com Linksys] |
||
| |
| WRT600N |
||
| 1.01.36 build 3 |
|||
| 2.20 |
|||
| Unsecured |
|||
| 703, 708, joyride-2230 |
|||
| Can connect with no security (I use MAC filtering) |
|||
|- |
|||
| [http://support.microsoft.com/ph/611 Microsoft] |
|||
| MN-700 |
|||
| 02.01.02.0590 |
|||
| Yes |
| Yes |
||
| |
|||
| worked with WPA2 (personal) and the Wpa.sh script |
|||
| Connects only when base station wireless security encryption is set to "none". Tried unsuccessfully to connect with WEP, and then with WPA enabled (G1G1 build 656). The only |
|||
wireless security setting that works with this router and OLPC is Mac filtering. |
|||
|- |
|- |
||
| [http://www. |
| [http://www.netgear.com/ NETGEAR] |
||
| WGR614v6 |
|||
| 3800HGV-B Gateway |
|||
| |
| V2.0.14_1.0.14 |
||
| Yes |
| Yes |
||
| joyride-2230 / firmware Q2E12 |
|||
| ATT Uverse supplied, changed WPA to WEP-open and assigned to channel 8 as opposed to Automatic |
|||
| Works alright with WPA encryption. |
|||
|- |
|- |
||
| [http://www. |
| [http://www.netgear.com/ NETGEAR] |
||
| WGT624v3 |
|||
| 2700HG-B GATEWAY |
|||
| ? |
|||
| 4.25.19 |
|||
| "Tested"?? |
|||
| Unsecured |
|||
| |
|||
| Didn't work / couldn't find on channel 4. Changed to channel 5 and XO found it and connected just fine. Unsecured network. |
|||
| B4, joyride 1597, q2d10. The following settings worked (some others did not). On the router: Name: lettersonly, Channel: 11, Mode: g only, Security Options: WEP, Authentication type: Shared key, Encryption Strength: 128bit, Key 1. On the XO: Key Type: Hex, key: <the same as router Key 1>, Authentication Type: Shared Key. |
|||
B4 image 703. Hardware Version: V3H1 Firmware Version: V2.0.10_1.0.1NA. WEP worked only in Open System Mode. WPA worked in both TKIP, AES and auto modes. |
|||
|- |
|- |
||
| [http://www. |
| [http://www.netgear.com/ NETGEAR] |
||
| WPN824v2 |
|||
| 2701HG-B GATEWAY |
|||
| |
| V2.0.10_1.2.17 |
||
| Yes |
| Yes |
||
|650, 653 / joyride-1500 |
|||
| Had to change the internet mode from the default of 802.11b/g to 802.11g |
|||
| G1G1 Tested WEP 128-bit PSK with 1.2.17 firmware (XO builds 650, 653), WPA2 CCMP PSK with 2.0.10 firmware (on build joyride-1500). Saw occasional failures to connect. When switching from WEP to WPA2, had to wipe out /home/olpc/.sugar/default/nm/networks.cfg, use the Wpa.sh script, and reboot. Working fine now. |
|||
|- |
|- |
||
| [http://www. |
| [http://www.netgear.com/ NETGEAR] |
||
| WGR614v10 |
|||
| AR525W |
|||
| |
| V1.0.2.18_47.0.52NA |
||
| Yes |
| Yes |
||
| 802 (release 8.2.1), XO-1 firmware Q2E41 |
|||
| Used WEP-Open with 128-bit hex key password |
|||
| Tested WPA2-PSK with passphrase. In the wireless key dialog, I had to choose Encryption Type AES-CCMP rather than the default "Automatic", but other than that it worked fine. |
|||
|- |
|- |
||
| [http://www. |
| [http://www.siemens.com Siemens] |
||
| Gigaset SE567 |
|||
| AirPort Express |
|||
| 004-E652-A3D-115-36-13 |
|||
| 6.3 |
|||
| WPA-PSK |
|||
| Joyride-2301 Firmware q2e13 |
|||
| Security: WPA-PSK+TKIm Channel: 6 Mode: mixed b/g |
|||
|- |
|||
| [http://www.siemens.com Siemens] |
|||
| Gigaset SX763 |
|||
| 2.3.52.15.00 |
|||
| Yes |
| Yes |
||
| HW V: Q709-K131 |
|||
| For WEP provide passphrase and select: ASCII + Shared key |
|||
| Security: WPA2-PSK Channel: 6 Mode: mixed b/g Super G: '''Disabled'''. Connection does not work with Super G enabled, sometimes have had to restart the networking service in the root terminal with "<tt>service network restart</tt>". |
|||
|- |
|||
| [http://www.speedtouch.com ST-585] |
|||
| SpeedTouch 585[i]V6 |
|||
| V6.2.15.5 |
|||
| Yes |
|||
| |
|||
| Works with WEP(open/hidden, 128-bit shared key) |
|||
|- |
|- |
||
| [http://www.tp-link.com TP-LINK] |
| [http://www.tp-link.com TP-LINK] |
||
Line 103: | Line 390: | ||
| v2.0.0 |
| v2.0.0 |
||
| Yes |
| Yes |
||
| |
|||
| Works with WEP(open, 128-bit shared key)in all channels |
| Works with WEP(open, 128-bit shared key)in all channels |
||
|- |
|- |
||
| [http://www. |
| [http://www.tp-link.com TP-LINK] |
||
| TL-WA801ND |
|||
| SpeedTouch 585[i]V6 |
|||
| 100408 |
|||
| V6.2.15.5 |
|||
| Yes |
| Yes |
||
| 10.1.2 |
|||
| Works with WEP(open/hidden, 128-bit shared key) |
|||
| Works with WEP (open & closed (choose the same for all XOs), 128-bit shared key) in bg compatibility mode, No encryption & WPA/WPA2-PSK "Automatic" selection in bgn mode. Tested by OLPC in AP mode with a single SSID active. Both XO-1 & XO-1.5 compatibility checked. |
|||
|- |
|||
| [http://www.tp-link.com TP-LINK] |
|||
| TL-WA901ND |
|||
| V2_100723 |
|||
| Yes |
|||
| 10.1.2 |
|||
| Works with WEP (open, 128-bit shared key) in bg compatibility mode, No encryption & WPA/WPA2-PSK "Automatic" selection in bgn mode. Tested by OLPC in AP mode with a single SSID active. Both XO-1 & XO-1.5 compatibility checked. |
|||
|- |
|- |
||
| [http://trendnet.com/us.htm TRENDnet] |
| [http://trendnet.com/us.htm TRENDnet] |
||
Line 115: | Line 414: | ||
| v2.00.0012 |
| v2.00.0012 |
||
| WEP |
| WEP |
||
| |
|||
| Does not show up in neighborhood until you attempt to connect to another WAP (e.g. at a neighbors house). The Trendnet then immediately shows up, and you can connect to it instead. Is on channel 9, maybe 1,6,11 would work better. |
| Does not show up in neighborhood until you attempt to connect to another WAP (e.g. at a neighbors house). The Trendnet then immediately shows up, and you can connect to it instead. Is on channel 9, maybe 1,6,11 would work better. |
||
|- |
|- |
||
| [http://www.westell.com/ Westell] |
| [http://www.westell.com/ Westell] |
||
Line 121: | Line 422: | ||
| VER:4.03.02.04 |
| VER:4.03.02.04 |
||
| Yes |
| Yes |
||
| |
|||
| Security: WEP, Type: Open System, 128-bit key password (13 characters) |
| Security: WEP, Type: Open System, 128-bit key password (13 characters) |
||
|- |
|- |
||
| [http://www. |
| [http://www.zyxel.com/ Zyxel] |
||
| P-660HW-D1 |
|||
| La Fonera 2100E |
|||
| |
| Version: V3.40(AGL.4) |
||
| Yes |
| Yes |
||
| |
|||
| Security: WEP, Type: Open System, 64-bit key password |
|||
| No security |
|||
|- |
|- |
||
| [http://www. |
| [http://www.westell.com/ Westell] |
||
| VersaLink Gateway Model 327W15-06 |
|||
| WPN824v2 |
|||
| Unknown |
|||
| V2.0.10_1.2.17 |
|||
| Yes |
| Yes |
||
|708 |
|||
| G1G1 Tested WEP 128-bit PSK with 1.2.17 firmware (XO builds 650, 653), WPA2 CCMP PSK with 2.0.10 firmware (on build joyride-1500). Saw occasional failures to connect. When switching from WEP to WPA2, had to wipe out /home/olpc/.sugar/default/nm/networks.cfg, use the Wpa.sh script, and reboot. Working fine now. |
|||
| Security: WEP, Type: Open System / Shared Key, 128-bit key password (13 characters) |
|||
|- |
|- |
||
| [http://www. |
| [http://www.linksys.com/ Linksys] |
||
| WRT54GS V1.1 |
|||
| WGT624v3 |
|||
| Tomato Firmware v1.19.1463 (http://www.polarcloud.com/tomato) |
|||
| ? |
|||
| Yes |
|||
| "Tested"?? |
|||
| 708 |
|||
| B4, joyride 1597, q2d10. The following settings worked (some others did not). On the router: Name: lettersonly, Channel: 11, Mode: g only, Security Options: WEP, Authentication type: Shared key, Encryption Strength: 128bit, Key 1. On the XO: Key Type: Hex, key: <the same as router Key 1>, Authentication Type: Shared Key. |
|||
| Security: WPA-PSK+TKIP, Mode: mixed b/g, Channel 11, XO S/N SHF80800F63 |
|||
|- |
|- |
||
| [http://www. |
| SAGEM[http://www.sagem.com/] |
||
| F@st 1500WG |
|||
| P-660HW-D1 |
|||
| 2.3.14.0 |
|||
| Version: V3.40(AGL.4) |
|||
| Yes |
| Yes |
||
| Joyride-2301 Firmware q2e12 |
|||
| No security |
|||
| WEP, Hex 40/128, channel 11, Mixed 11 b/g.S/N SHF80701C99. Is communicating with the modem continuously (keeps sending in msh0 alternating 2 and 4b packets when no web applications are running) and eventually is resetting the modem. |
|||
|- |
|- |
||
| [http:// |
| SonicPoint[http://www.sonicwall.com/] |
||
| SonicPoint-g |
|||
| MN-700 |
|||
| |
| SonicOS 5.0.0.0 |
||
| Yes |
| Yes |
||
| Firmware Q2D07 Q2D |
|||
| Connects only when base station wireless security encryption is set to "none". Tried unsuccessfully to connect with WEP, and then WPA enabled (G1G1 build 656). The only |
|||
| Standalone mode, worked with WEP immediately and with WPA2-AUTO-PSK after editing /etc/wpa_supplicant/wpa_supplicant.conf and cutting and pasting the hex key into the login box |
|||
wireless security setting that works with this router and OLPC is Mac filtering. |
|||
|} |
|||
{|class="wikitable" |
|||
|+ '''Wireless Access Point Smoke Test''' |
|||
|- |
|||
!Manufacturer |
|||
!Model |
|||
!Firmware |
|||
!XO Build |
|||
!XO serial number |
|||
!Tester contact info |
|||
!Notes |
|||
|- |
|- |
||
| [http://www.dlink.com/products/?pid=292 DLINK] |
|||
| DWL2100AP |
|||
| unknown |
|||
| In field only |
|||
| This AP was tested and may be used in Nepal |
|||
| |
|||
|- |
|||
| [http://www.dlink.com/products/?pid=292 DLINK] |
|||
| SMC |
|||
| DWL2200P |
|||
| Barracuda |
|||
| unknown |
|||
| V1.06 |
|||
| In field only |
|||
| |
| 650, 656 (1 XO) and 703 (2 XOs) |
||
| CSN749022A0 |
|||
| [[ User:Culseg|Culseg]] |
|||
| limited to 40 or 128 WEP but works reliably. http://www.smc.com/index.cfm?event=support&localeCode=EN_USA |
|||
|- |
|||
| Zoltan Tech |
|||
| ZoWii |
|||
| |
|||
| joyride 2301 |
|||
| CSN74803DDB |
|||
| [[User:AuntiMame|AuntiMame]] |
|||
| Works fine. Not wireless -- but I didn't know where else to report this. |
|||
|} |
|} |
||
== See also == |
== See also == |
||
* [[Wifi Connectivity]] |
* [[Wifi Connectivity]] |
||
* [[Manual Wireless Association]] |
* [[Manual Wireless Association]] |
||
[[Category:Test results]] |
|||
[[Category:Network]] |
Latest revision as of 02:21, 28 June 2014
A list of wireless routers that had been tested for compatibility with the XO Laptop. Most are no doubt no longer available; the market for these products moves reasonably quickly.
Manufacturer | Model | Firmware | Tested | XO+Build | Notes |
---|---|---|---|---|---|
2Wire | 2700HG-B GATEWAY | 4.25.19 | Unsecured | Didn't work / couldn't find on channel 4. Changed to channel 5 and XO found it and connected just fine. Unsecured network. | |
2Wire | 2701HG-B GATEWAY | 5.29.109.5 | Yes | 767 | No changes needed connects using auto with WEP. |
2Wire | 2701HG-B GATEWAY | 5.29.109.11 | Yes | 821 | Successfully connects when using "WPA-PSK and WPA2-PSK" authentication option. |
2Wire | 2701HG-B GATEWAY | 5.29.47 | Yes | Had to change the internet mode from the default of 802.11b/g to 802.11g | |
2Wire | 2701HG-G GATEWAY | 5.29.115.5 | Yes | Yes with WEP. Never got the OLPC machine to connect when WPA2 encryption was used. | |
2Wire | 3800HGV-B Gateway | 5.29.105.76 | Yes | ATT Uverse supplied, changed WPA to WEP-open and assigned to channel 8 as opposed to Automatic | |
Actiontec | MI424WR | Unknown | Yes | WPA non-functional on update.1 | |
Airlink 101 | AR525W | v1.0.50 | Yes | Used WEP-Open with 128-bit hex key password
| |
Apple | Time Capsule | XO: Q2E18 | No | 767 | WPA/WPA2 Channel 11 worked for me. Not tested with the scripts here |
Apple | AirPort Express | 6.3 | Yes | For WEP provide and select: ASCII + Shared key | |
Apple | AirPort Extreme | 7.3.2 | Yes | 767 | Tested WPA1 with the scripts here |
Buffalo Tech | WHR-HP-G54 | DD-WRT v24 (05/24/08) mini - build 9526 | Yes | 790 - Firmware Q2E24 | Worked for WEP open with HEX AND with WPA2+tkip |
Cisco | AIR-BR1310G-A-K9-R | 12.3(8)JA | Unsecured Only | Works but radio must be set to channels 1, 6, or 11. I normally configure this device to automatically choose the least congested frequency, but in my office that ends up being something other than 1, 6 and 11 most of the time. Note also that activity sharing totally fails with this AP - nada, zip.
| |
Conceptronic | C54BRS4A | 1.00 | Yes | Joyride 2263 - Firmware Q2E12 | Worked for WEP open with ASCII password. |
D-Link | DAP-1150 | Unknown | No | os201 - Firmware Q3A35 | At least one user reported failure with this model in WEP mode. |
D-Link | DIR-615 | 2.20 | Yes | worked with WPA2 (personal) and the Wpa.sh script | |
D-Link | DIR-600 | 2.03 | Yes | Tested with no security | |
D-Link | DIR-300 | 1.04 | Yes | worked with WEP 128bit ASCII (only tried that one - on set channel 3). | |
D-Link | DWL-G730AP | 2.00 | Yes | Worked with WEP 128 as an access point. | |
D-Link | DWL2100AP | unknown | In field only | This AP was tested and may be used in Nepal. It was also tested for Australia/Pacific Islands where it was unsuccessful and unable to allocate DHCP addresses. | |
D-Link | DWL2200P | unknown | In field only | This AP was tested and may be used in Nepal | |
D-Link | DWL-G700AP | Unknown | Yes | Works as Open System, without authentification, without WEP, Channel 3. WPA-PSK works with firmware 2.30. | |
D-Link | DWL3200P | unknown | In field only | This AP was tested and may be used in Nepal
| |
D-Link | D-Link WBR-2310 | 1.02 | Yes | Open/WEP/WPA2 working. WPA fails, see: <trac>7825</trac> | |
FON | La Fonera 2100E | Release: 0.7.1.2 | Yes | Security: WEP, Type: Open System, 64-bit key password | |
Linksys | WAG54G V2 | 1.01.22 | Yes | Tested with no security; also with WAP | |
Linksys | BEFW11 S4 version 2 | 1.45.10 | Yes | 650, 708, 2230 | Tested with WEP 128-bit key. A few times with build 708 I had to return to Neighborhood View to reconnect after standby, and once I had to re-enter the hex key. |
Linksys | WCG200-CC | Yes | Tested with no security; also with WEP 128 passphrase. See Sharing_User_Experiences_with_OLPC_XO_Wifi_Connectivity_-_Glew_2007_Jan for trick. | ||
Linksys | WRT54G | 4.21.1 1/20/2007 | Yes | Use channel 1, 6, or 11 (see Wifi_Connectivity#Channel). | |
Linksys | WRT54G V4 | DD-WRT v23 SP2 micro | Yes | WEP connects fine all channels, WPA2 via wpa.sh script. | |
Linksys | WRT54GL | OpenWRT WhiteRussian (RC4) | Yes | tested using no security (MAC based access control) on channel 3
| |
Linksys | WRT54GL | OpenWRT Kamikaze 7.09~ | Yes | WPA works. | |
Linksys | WRT54GL | v4.30.11, Aug. 7, 2007 | Yes | WPA2 via Wpa.sh, G-only on channel 6 | |
Linksys | WRT110 | v1.0.03 | Yes | Tested with no security and WPA2 using 256 bit key generated from passphrase & SSID | |
Linksys | WRT300Nv1.1 | 1.51.2 6/04/2007 | Yes | WPA2 via Wpa.sh, G-only on channel 11 | |
Linksys | WRT350N | Yes | WPA | ||
Linksys | WRT350N | 1.03.7 | Unsecured | Cannot connect using no security. | |
Linksys | WRT600N | 1.01.36 build 3 | Unsecured | 703, 708, joyride-2230 | Can connect with no security (I use MAC filtering) |
Microsoft | MN-700 | 02.01.02.0590 | Yes | Connects only when base station wireless security encryption is set to "none". Tried unsuccessfully to connect with WEP, and then with WPA enabled (G1G1 build 656). The only
wireless security setting that works with this router and OLPC is Mac filtering. | |
NETGEAR | WGR614v6 | V2.0.14_1.0.14 | Yes | joyride-2230 / firmware Q2E12 | Works alright with WPA encryption. |
NETGEAR | WGT624v3 | ? | "Tested"?? | B4, joyride 1597, q2d10. The following settings worked (some others did not). On the router: Name: lettersonly, Channel: 11, Mode: g only, Security Options: WEP, Authentication type: Shared key, Encryption Strength: 128bit, Key 1. On the XO: Key Type: Hex, key: <the same as router Key 1>, Authentication Type: Shared Key.
B4 image 703. Hardware Version: V3H1 Firmware Version: V2.0.10_1.0.1NA. WEP worked only in Open System Mode. WPA worked in both TKIP, AES and auto modes. | |
NETGEAR | WPN824v2 | V2.0.10_1.2.17 | Yes | 650, 653 / joyride-1500 | G1G1 Tested WEP 128-bit PSK with 1.2.17 firmware (XO builds 650, 653), WPA2 CCMP PSK with 2.0.10 firmware (on build joyride-1500). Saw occasional failures to connect. When switching from WEP to WPA2, had to wipe out /home/olpc/.sugar/default/nm/networks.cfg, use the Wpa.sh script, and reboot. Working fine now. |
NETGEAR | WGR614v10 | V1.0.2.18_47.0.52NA | Yes | 802 (release 8.2.1), XO-1 firmware Q2E41 | Tested WPA2-PSK with passphrase. In the wireless key dialog, I had to choose Encryption Type AES-CCMP rather than the default "Automatic", but other than that it worked fine. |
Siemens | Gigaset SE567 | 004-E652-A3D-115-36-13 | WPA-PSK | Joyride-2301 Firmware q2e13 | Security: WPA-PSK+TKIm Channel: 6 Mode: mixed b/g
|
Siemens | Gigaset SX763 | 2.3.52.15.00 | Yes | HW V: Q709-K131 | Security: WPA2-PSK Channel: 6 Mode: mixed b/g Super G: Disabled. Connection does not work with Super G enabled, sometimes have had to restart the networking service in the root terminal with "service network restart".
|
ST-585 | SpeedTouch 585[i]V6 | V6.2.15.5 | Yes | Works with WEP(open/hidden, 128-bit shared key) | |
TP-LINK | TL-WA501G | v2.0.0 | Yes | Works with WEP(open, 128-bit shared key)in all channels | |
TP-LINK | TL-WA801ND | 100408 | Yes | 10.1.2 | Works with WEP (open & closed (choose the same for all XOs), 128-bit shared key) in bg compatibility mode, No encryption & WPA/WPA2-PSK "Automatic" selection in bgn mode. Tested by OLPC in AP mode with a single SSID active. Both XO-1 & XO-1.5 compatibility checked. |
TP-LINK | TL-WA901ND | V2_100723 | Yes | 10.1.2 | Works with WEP (open, 128-bit shared key) in bg compatibility mode, No encryption & WPA/WPA2-PSK "Automatic" selection in bgn mode. Tested by OLPC in AP mode with a single SSID active. Both XO-1 & XO-1.5 compatibility checked. |
TRENDnet | TEW432BRP_c1 | v2.00.0012 | WEP | Does not show up in neighborhood until you attempt to connect to another WAP (e.g. at a neighbors house). The Trendnet then immediately shows up, and you can connect to it instead. Is on channel 9, maybe 1,6,11 would work better. | |
Westell | D90-327W15-06 | VER:4.03.02.04 | Yes | Security: WEP, Type: Open System, 128-bit key password (13 characters) | |
Zyxel | P-660HW-D1 | Version: V3.40(AGL.4) | Yes | No security | |
Westell | VersaLink Gateway Model 327W15-06 | Unknown | Yes | 708 | Security: WEP, Type: Open System / Shared Key, 128-bit key password (13 characters) |
Linksys | WRT54GS V1.1 | Tomato Firmware v1.19.1463 (http://www.polarcloud.com/tomato) | Yes | 708 | Security: WPA-PSK+TKIP, Mode: mixed b/g, Channel 11, XO S/N SHF80800F63 |
SAGEM[1] | F@st 1500WG | 2.3.14.0 | Yes | Joyride-2301 Firmware q2e12 | WEP, Hex 40/128, channel 11, Mixed 11 b/g.S/N SHF80701C99. Is communicating with the modem continuously (keeps sending in msh0 alternating 2 and 4b packets when no web applications are running) and eventually is resetting the modem. |
SonicPoint[2] | SonicPoint-g | SonicOS 5.0.0.0 | Yes | Firmware Q2D07 Q2D | Standalone mode, worked with WEP immediately and with WPA2-AUTO-PSK after editing /etc/wpa_supplicant/wpa_supplicant.conf and cutting and pasting the hex key into the login box |
Manufacturer | Model | Firmware | XO Build | XO serial number | Tester contact info | Notes |
---|---|---|---|---|---|---|
SMC | Barracuda | V1.06 | 650, 656 (1 XO) and 703 (2 XOs) | CSN749022A0 | Culseg | limited to 40 or 128 WEP but works reliably. http://www.smc.com/index.cfm?event=support&localeCode=EN_USA |
Zoltan Tech | ZoWii | joyride 2301 | CSN74803DDB | AuntiMame | Works fine. Not wireless -- but I didn't know where else to report this. |