12297

OLPC has begun enabling the second processor core in the XO-4 laptops.

Problem

The released operating systems 13.2.1 and 13.2.2 run only one core. The XO-4 underperforms compared to some other devices.

Solution

XO-4 only:

Upgrade to 14.1.0 once it is released

Workaround

Care is needed. Without the firmware upgrade, our dual-core kernel will not boot. With the firmware upgrade, the original kernel will not boot. The reason for the restriction is that changes to firmware and kernel must occur at the same time.

On unsecure laptops running 13.2.0, 13.2.1 and 13.2.2, upgrade the kernel and the firmware at the same time. The exact steps are:

• download the 3.5.7_xo4-20150108.2115.olpc.b2c8f99 kernel package,
• download the q7c02.rom new firmware,
• copy both to a USB drive,
• add battery and power cable, and wait for the laptop to finish charging,
• upgrade the kernel,

sudo rpm -U kernel-3.5.7_xo4-20150108.2115.olpc.b2c8f99.armv7hl.rpm

• shutdown,

sudo poweroff

• upgrade the firmware,

ok flash u:\q7c02.rom

• allow the laptop to boot.

Reverting

• download the 3.5.7_xo4-20141118.2329.olpc.cd558cf kernel package,
• download the q7b43.rom old firmware,
• copy both to a USB drive,
• downgrade the kernel,
• shutdown,

sudo poweroff

• downgrade the firmware,

ok flash u:\q7b43.rom

• allow the laptop to boot.

Using a single core kernel on 14.1.0

Certain tasks may benefit from the higher memory bandwidth of the single core kernel.

• download the 3.5.7_xo4-20141118.2329.olpc.cd558cf kernel package,
• download the q7b43.rom old firmware,
• copy both to a USB drive,
• note: remove the /bootpart/boot/bootfw.zip file, to prevent automatic firmware upgrade,
• downgrade the kernel,
• shutdown,

sudo poweroff

• downgrade the firmware,

ok flash u:\q7b43.rom

• allow the laptop to boot.

See Also

• ticket #12297,