Emulating the XO/lang-ko

Please copy/paste "{{Translationlist | xx | origlang=en | translated={{{translated}}}}}" (where xx is ISO 639 language code for your translation) to Emulating the XO/lang-ko/translations

HowTo [ID# 47397]  +/-

+	Software
XO
	13.2.11	2020-01-29
XS
	xs-0.7	2012-02-20

laptop-in-laptop

빠른 시작- 라이브시디

대부분 슈가를 사용해보는 가장 쉬운 방법은 라이브시디입니다. 이 방법은 쉽지만, 재부팅을 했을 때 하였던 작업들이 모두 사라집니다.

Quick Start - Emulation

Emulation is the other way to try Sugar. It can be harder to set up,, but work is preserved.

Sound in TamTam may not be working at the moment. MitchellNCharity 13:16, 5 June 2007 (EDT)

Quick Start for Developers

Developing on emulation is one alternative for developing software.

Get the latest image from here. (add link to tinderbox) Install QEMU and kernel acceleration as described in Emulating the XO/Quick Start. See the /Help_and_tips "Development" section.

See #XO-QEMU boot broken - current workarounds.

Overview

One way to run oplc software is using an emulator on your pc. See Getting started programming for other options.

Note Category:Emulation and Help and tips.

For play, you can use LiveCd or Quick Start.

For development, you can use LiveCd, or qemu (as in quick start, but with a different image), or perhaps one of the Developer Images other than the LiveCd. An alternate approach is to attempt installing sugar. See Getting started programming for a comparison.

A common development approach is to use QEMU with kqemu acceleration. See Quick Start for the basics. Though for development, we will use a different .img, one with a few extra utility programs. See OS images, including latest stable build.

Instead of qemu, you can run VMware, and there are additional options on a Mac.

Please report your experiences in User Feedback on Images. There is a Virtualization Common Room.

There are limitations with XO disk images.

The LATEST-STABLE-BUILD versus LATEST build distinction is mostly of interest to people running on actual XO's. In emulation, developers should usually use LATEST. And when STABLE is old, non-developers probably should too.

Comparison of alternatives

An OLPC laptop is custom hardware, running a stripped-down Red Hat linux, running Sugar. But what if you don't have a real olpc laptop? There are a several options, which can each be used in a couple of ways.

recomendations

platform	purpose	recommendation
Windows	development	emulated xo disk image; or emulated Ubuntu with sugar-jhbuild; (or develoepr CD or LiveCD)?. (need your reports)
Mac	development	emulated xo disk image; or emulated Ubuntu with sugar-jhbuild; (or developer CD or LiveCD)?. (need your reports)
Mac with Parallels	development	install Ubuntu 32-bit, and Sugar on Ubuntu Linux. See /Mac.
Ubuntu 32-bit	development	Sugar with sugar-jhbuild and Sugar on Ubuntu Linux
32-bit linux	development	Sugar with sugar-jhbuild
64-bit linux	development	xo disk images under qemu; or LiveCd once it gets updated (currently it's April)

I don't really believe the development option of Windows/Mac developer/live CD. I've not yet heard of it actually being used. They are months out of date (April). But Mcfletch said (in May) it's an option, so I added it. MitchellNCharity 09:19, 23 June 2007 (EDT)

background

option	updated	sound?	camera?	library?	etoys?	R/W?	development software?	net?	comments
Installing Sugar	continuous	yes	yes?	yes?	yes	yes	your own	yes	On some platforms, it takes time and space (hours and ~3GB), but "just works". On others, it is quite difficult to install.
Installing Sugar, on a virtual 32-bit Ubuntu, running in an emulator (qemu, parallels, or vmware)
LiveCd	April	yes(boot) yes?(qemu)	yes?(boot) no(qemu)	no	yes	no	toolchain, Gnome	yes?	Alternative Quick Start. Can both be booted from, and used in qemu. Problems: A.
XO disk images:
LATEST-STABLE-BUILD http://olpc.download.redhat.com/olpc/streams/development/LATEST-STABLE-BUILD/
...development-ext3.img	~monthly	yes/B	no	yes	yes	yes	no	after config	Quick Start for getting a look at Sugar.
...development-devel_ext3.img	~monthly	yes/B	no	no	yes	yes	a little	after config
LATEST http://olpc.download.redhat.com/olpc/streams/development/LATEST/
...development-ext3.img	~daily	yes/B	no	yes	yes	yes	no	after config
...development-devel_ext3.img	~daily	yes/B	no	no	yes	yes	a little	after config	Good for new developers (requires some command-line comfort).
OTHER
FC6+Sugar	April	yes?	?	?	no	yes	Full Fedora Softare Dev.	yes	6GB (April version: no etoys)

Key:

library: A library of sample content is included (english version). Ie, pretty text to web browse without having to get network.

R/W (writable): With an .img, you can save things between sessions. With a .iso, your environment is the same each time you start.

development software: are development tools included?

Net (network): does the network "just work" or "manual" steps are required?

Problems:

A: LiveCd (April) on fc6 x86_64, kernel panics under kqemu. A squashfs problem.

B: Tam Tam is silent (though EToys makes noise). Cause unknown.

Notes:

• re "does sugar-jhbuild support camera/mic?": "yes, if the camera uses v4l2 and 640x480, I'd suspect so." Can someone confirm this? (#olpc, now) MitchellNCharity 00:16, 2 June 2007 (EDT)

Doables:

• Remove LiveCd's "?" above.
• Find out what's going on with Tam Tam sound. It would be nice for the xo disk images to all be sound-yes.
• Add a microphone column? Reconsolidate sound/camera/mic into a H/W column?

XO-QEMU boot broken - current workarounds

Build 445 was the last version which booted cleanly under qemu (ticket). More recent builds require workarounds.

• The boot currently hangs in rc netfs. So we disable it. This only needs to be done once.
  1. Get a shell. Follow the instructions below, but add a "2" to the end of the kernel line. So it is root=/dev/hda1 2
  2. Log in as root, no password.
  3. Then:

mv /etc/rc.d/rc3.d/S25netfs /etc/rc.d/rc3.d/DISABLED-S25netfs
mv /etc/rc.d/rc5.d/S25netfs /etc/rc.d/rc5.d/DISABLED-S25netfs

4. Done. Now restart qemu, following the instructions below.

(This workaround avoids the boot hanging after saying "Mounting other filesystems:".)

• When booting on qemu, add root=/dev/hda to the grub kernel line. This needs to be done every time.
  1. When you start your xo disk image on qemu, you should see a blue grub screen, doing a "Booting .. in N seconds" countdown. Press space to interrupt it.
  2. Press e (edit). This will show you 3 lines.
  3. Move to the second, which begins "kernel". Press e. This will take you to the end of the kernel line.
  4. Add root=/dev/hda1 Then press enter.
  5. Press b to continue booting.

(This workaround avoids "WARNING: Cannot find root file system!", and being dropped into an emergency shell.)

Should add instructions to modify the image's grub config, so this doesn't need to be done every time you boot. MitchellNCharity 12:04, 3 July 2007 (EDT)

It might be worth gathering the currently scattered notes, into a single list of step by step instructions, for getting from nothing, to a pair of qemu images running with Xephyr's and ssh. MitchellNCharity 12:04, 3 July 2007 (EDT)