XO Troubleshooting Guide: Difference between revisions
No edit summary |
|||
(88 intermediate revisions by 14 users not shown) | |||
Line 1: | Line 1: | ||
{{OLPC}}{{Translations}}__NOTOC__ |
|||
This is a troubleshooting guide for the [[Hardware_specification#Laptop_Hardware|XO laptop]]. It is geared toward troubleshooting production units running firmware version Q2D03 or greater. |
|||
This is a troubleshooting guide for the [[Hardware#XO_Laptop|XO laptop]]. |
|||
While this is intended for use in a repair center, most of the procedures can be followed by users to [[Repair|repair]] their laptops. |
|||
==Powering on== |
|||
''Still very much a work in progress!! Feel free to add'' |
|||
If you are having problems getting the XO to power on, see [[XO_Troubleshooting_PowerOn|Troubleshooting Power On]]. The [[Startup Diagnosis]] page also describes how end users (not repair centers) can debug power-on or boot problems. |
|||
==Display== |
|||
=Problems powering on= |
|||
If you are having problems with the display on an XO laptop, see the [[XO_Troubleshooting_Display|Display diagnostics section]]. |
|||
==Power and Battery== |
|||
For an introduction to the different boot options selectable while powering on, see the [[Cheat codes]]. |
|||
If you are having problems such as: |
|||
* the battery is not charging |
|||
* the battery is suddenly losing charge |
|||
* the laptop won't run from a power adapter |
|||
Then you should view: |
|||
All of these tests assume that a known good source of power is available, either a charged battery or power adapter. To debug problems with the power source, and battery charging issues, see [[#Power_and_Battery_problems|Power and Battery problems]]. |
|||
* [[XO Troubleshooting Battery]], if you believe the problem is contained within the battery itself, or |
|||
* [[XO Troubleshooting Power]], if you believe the problem is contained within the laptop (e.g. charging circuitry, power input circuitry), or |
|||
* Both of the above, if you are unsure where the problem is localised. |
|||
==Network== |
|||
==Is the Power LED On ?== |
|||
If your laptop is having trouble connecting to other laptops or the Internet, see the [[XO_Troubleshooting_Network|Network diagnostics section]]. |
|||
==Audio and Camera== |
|||
When the power button is pressed once, the power LED doesn't turn on. |
|||
If you are having problems with the audio (microphone, speakers, headphones, or microphone input) or camera on an [[Hardware#XO_Laptop|XO laptop]], see the [[XO_Troubleshooting_AV|AV diagnostics section]]. |
|||
==Keyboard and Touchpad== |
|||
Please try [[#Rebooting_the_Embedded_Controller|Resetting the Embedded Controller]]. |
|||
If you are having problems with the keyboard or touchpad on an XO laptop, see the [[XO_Troubleshooting_Keyboard|Keyboard diagnostics section]]. |
|||
==Touchscreen== |
|||
See the [[XO_Troubleshooting_Touchscreen|Touchscreen section]]. |
|||
==Is the display lighting up ?== |
|||
==USB== |
|||
When the power button is pressed once, the power LED turns on, but the |
|||
If you are having problems with the USB interfaces on an XO laptop, see the [[XO_Troubleshooting_USB|USB diagnostics section]]. |
|||
screen doesn't light up |
|||
==Debugging Procedures== |
|||
==Is the boot sound playing ?== |
|||
The following are common debugging and test procedures: |
|||
* [[XO Full Reset|Rebooting the Embedded Controller]] - This completely resets a laptop |
|||
If no boot sound is played, but the machine boots normally, see [[#Audio_problems|Audio Problems]]. |
|||
* [[XO_Self_Test|Hardware Self-Test]] is included in the [[Hardware#XO_Laptop|XO laptop]]. |
|||
* [[Cheat codes|Boot options]] - Different boot options are available through pressing buttons around the screen during the initial boot process (immediately after pressing the power button). A sampling (more at [[Cheat codes]]): |
|||
** '✓' (check) game pad key: forces a more detailed display while booting. See [[XO_Troubleshooting_PowerOn#The_display_is_showing_an_XO_icon|Troubleshooting Power-On]] for more details. This is useful for debugging activation problems. |
|||
** 'O' game pad key: alternate between the current boot image and a previous one. In laptops which have never been upgraded, there is no previous boot image to use. |
|||
** Rocker left: run the [[XO_Self_Test|hardware self-test]]. |
|||
* A [[Serial_adapters|serial adapter]] is very useful for debugging dead laptops |
|||
==Repair Procedures== |
|||
==Is activation failing (temp meta question) ?== |
|||
The following are common repair procedures: |
|||
* [[Reuse checklist|Summary Refurbishing & Reuse Checklist]] |
|||
* [[Motherboard Handling Procedures]] |
|||
* [[Disassembly|Disassembly Guide]] |
|||
** [[Disassembly_top|Getting at the display and motherboard]] |
|||
** [[Disassembly_bottom|Replacing a keyboard/touchpad]] |
|||
** [[Screws|Guide to screws]] |
|||
* Motherboard Guides: [[XO Motherboard|intro]], or [[XO_Motherboard_Repair|repair]] |
|||
* [[Activation_and_Developer_Keys|Getting a developer key for a laptop]] |
|||
* Using an XO as a serial terminal on either [[Serial_adapters#Linux|Linux]] or [[Firmware/Serial_Terminal|Open Firmware]], |
|||
* [[XO_Flash_Bad_Blocks|Finding and fixing bad blocks of NAND Flash]] |
|||
* [[SPI_FLASH_Recovery|Replacing/Recovering the EC (SPI) Flash]] - Replacing the [[Embedded_controller|Embedded Controller]] Flash |
|||
* [[Fix_Clock|Fixing an RTC problem]] - Fix laptops which can't boot due to reset RTC time. |
|||
* [[XO_LiFePO4_Recovery_Procedure|Fixing LiFePO<sub>4</sub> batteries that stop charging]] |
|||
* [[XO_Power_Diagram|A detailed description of the laptop power circuitry (XO-1)]] |
|||
* [[Memory Bit Mapping]] |
|||
[[Category: Repair]] |
|||
==Is the display just showing an XO ?== |
|||
[[Category: Hardware]] |
|||
[[Category:XO-1]] |
|||
[[Category:XO-1.5]] |
|||
=Display problems= |
|||
[[Category:XO-1.75]] |
|||
[[Category:XO-4]] |
|||
==Does one half of the display look bad ?== |
|||
[[Category: Developers]] |
|||
==Does the display fade to white ?== |
|||
=Audio problems= |
|||
=USB problems= |
|||
==One of the USB ports doesn't work== |
|||
==None of the USB ports work== |
|||
=Power and Battery problems= |
|||
=Common Procedures= |
|||
==Rebooting the Embedded Controller== |
|||
The XO embedded controller (EC) occasionally becomes confused. To reset it, remove all power sources from the laptop: |
|||
# Take the battery out and remove the power adapter |
|||
# Wait 10 seconds to allow the embedded controller to lose power and reset |
|||
# Replace at least one source of power (battery or power adapter) |
|||
==Reloading the software== |
Latest revision as of 05:09, 28 October 2013
This is a troubleshooting guide for the XO laptop. While this is intended for use in a repair center, most of the procedures can be followed by users to repair their laptops.
Powering on
If you are having problems getting the XO to power on, see Troubleshooting Power On. The Startup Diagnosis page also describes how end users (not repair centers) can debug power-on or boot problems.
Display
If you are having problems with the display on an XO laptop, see the Display diagnostics section.
Power and Battery
If you are having problems such as:
- the battery is not charging
- the battery is suddenly losing charge
- the laptop won't run from a power adapter
Then you should view:
- XO Troubleshooting Battery, if you believe the problem is contained within the battery itself, or
- XO Troubleshooting Power, if you believe the problem is contained within the laptop (e.g. charging circuitry, power input circuitry), or
- Both of the above, if you are unsure where the problem is localised.
Network
If your laptop is having trouble connecting to other laptops or the Internet, see the Network diagnostics section.
Audio and Camera
If you are having problems with the audio (microphone, speakers, headphones, or microphone input) or camera on an XO laptop, see the AV diagnostics section.
Keyboard and Touchpad
If you are having problems with the keyboard or touchpad on an XO laptop, see the Keyboard diagnostics section.
Touchscreen
See the Touchscreen section.
USB
If you are having problems with the USB interfaces on an XO laptop, see the USB diagnostics section.
Debugging Procedures
The following are common debugging and test procedures:
- Rebooting the Embedded Controller - This completely resets a laptop
- Hardware Self-Test is included in the XO laptop.
- Boot options - Different boot options are available through pressing buttons around the screen during the initial boot process (immediately after pressing the power button). A sampling (more at Cheat codes):
- '✓' (check) game pad key: forces a more detailed display while booting. See Troubleshooting Power-On for more details. This is useful for debugging activation problems.
- 'O' game pad key: alternate between the current boot image and a previous one. In laptops which have never been upgraded, there is no previous boot image to use.
- Rocker left: run the hardware self-test.
- A serial adapter is very useful for debugging dead laptops
Repair Procedures
The following are common repair procedures:
- Summary Refurbishing & Reuse Checklist
- Motherboard Handling Procedures
- Disassembly Guide
- Motherboard Guides: intro, or repair
- Getting a developer key for a laptop
- Using an XO as a serial terminal on either Linux or Open Firmware,
- Finding and fixing bad blocks of NAND Flash
- Replacing/Recovering the EC (SPI) Flash - Replacing the Embedded Controller Flash
- Fixing an RTC problem - Fix laptops which can't boot due to reset RTC time.
- Fixing LiFePO4 batteries that stop charging
- A detailed description of the laptop power circuitry (XO-1)
- Memory Bit Mapping