Secure Digital card: Difference between revisions

From OLPC
Jump to navigation Jump to search
(→‎Wikipedia: turn into See als section and reference USB drive)
(move fake product links to list of references, as it isn't important enough to preceed instructions on how to use a card)
 
(19 intermediate revisions by 5 users not shown)
Line 1: Line 1:
{{RightTOC}}
{{RightTOC}}
The XO laptop has one slot for a MMC (MultiMediaCard), SD (SecureDigital) or SDHC (SecureDigital High Capacity) card. These cards, like USB flash drives, are automatically mounted and are accessed through the [[Journal Activity]]. The [[Journal]] entry shows you how to access the add-on memory devices. You can move files to and from the storage media by dragging and dropping the file in the Journal view to the USB stick icon at the bottom of the screen or by command line in the [[Terminal Activity]].
The XO laptop has a slot for an SD card. Once inserted, the contents are shown by the [[Journal Activity]] or the GNOME file browser. See [[Journal]] for how to use an SD card in Sugar; you can move files to and from the card by dragging and dropping the file in the Journal view to the card icon at the bottom of the screen.


== Using ==
See discussion [[Talk:Secure_Digital_card]] to talk about specific situations.
*Insert card into the slot at the bottom of the screen. See below for more detailed instructions.

*In [[Sugar]], a card icon will appear at the lower left of the [[Journal]], and you can begin to use it.
== About the Cards ==
*In Gnome, an icon for the card will appear on the desktop, and a window will open showing the files on the card, and you can begin to use it.

*When finished with the card, you ''must'' tell the computer before removing it, either;
See Wikipedia for a good overview of [http://en.wikipedia.org/wiki/Secure_digital SD and SDHC cards]. There are various incompatibilities between cards from different manufacturers. In general, both SD and SDHC cards work.
:*click on it in the Journal and choose unmount,

:*click on it in the frame and choose unmount,
== Quick Start ==
:*click the eject button in the GNOME file browser window, or;
#Insert card into the slot at the bottom of the screen. See below for more detailed instructions.
:*right-click on the GNOME desktop icon and choose ''Eject''.
#The card will show up at the lower left of the [[Journal]] if correctly mounted.
:If you remove the card without this step, pending changes to the card may not be written and some files may be left in a corrupted state.
#In the [[Terminal activity]] or console, the files on the card will be available in a subdirectory of <tt>/media</tt> based on the card's disk label, for example <tt>/media/''KINGSTON''/</tt>. If the card is not correctly mounted when booting the XO, an error message may briefly flash. The [[Linux software|Linux commands]] <tt>df</tt>, <tt>cat /etc/mtab</tt>, <tt>cat /etc/fstab</tt>, <tt>ls /media</tt>, and <tt>dmesg | grep mmc</tt> can help figure out the status.
*Eject the card; push it in slightly until you feel a click, then release it.
#To safely remove the card, ''you must'' click on it in the Journal and choose unmount. If you remove the card without this step, pending changes to the card may not be written and some files may be left in a corrupted state. Also, remounting the card before rebooting may be difficult.
#Physically removing the card requires pushing it in slightly and releasing it ("click-in to load, click-in to eject"). The card should then protrude far enough to grab with fingernails. A non-standard card with excessive width may require tweezers.


== Supported cards ==
== Supported cards ==
* Most cards work,
* File systems FAT16 (usually on SD cards) and FAT32 (usually on SDHC cards) are supported.
* Some cards don't work,
* Most filesystems work; such as FAT16, FAT32, ext2, ext3, ext4,
* Some filesystems won't work, such as HFS+,
* Most card sizes should work; but we have not tested them all,
* Some cards work for file storage, but not for booting.


For deployments, carefully test a sample of the card being used.
* Cards of various sizes work. 8-gigabyte SD memory cards work. 16GB cards [http://en.forum.laptop.org/viewtopic.php?f=2&t=965&p=3035&hilit=sdhc+16GB have been reported to work]. While SD & SDHC cards up to 256 GB should be supported, larger cards can only be verified as they become available.


== Insertion ==
* Reduced Size MMC cards, like the ones Nokia uses in Nokia 770 work well. PQI 8 GB cards [[Talk:Secure_Digital_card#PQI_High_capacity_8GB_SD_card_did_not_work|do not appear to work]].


To properly insert the card the gold fingers on the card should be facing up and towards the front of the display. Insert the card until it is flush with the bottom of the screen, you will hear or feel a click when the card is fully seated. It is a "Push to Click in and Push to Click out (Eject)" mechanism. When ejecting, push the card in again and release. It should come out far enough to grab with fingers, Try small tweezers if you have a hard time getting the card to come out again. While not required, you can also attach a little piece of adhesive tape to the card to give an easy handle to pull on the card if it sticks.
* Straight old MMC cards have not been tested. They should work, but some other hardware platforms do not support MMC cards.

* The [[Fedora on XO]] project [https://fedoraproject.org/wiki/QA/TestPlans/Fedora10_On_XO tested and recommends the Sandisk Extreme III line of SD/SDHC cards] to run a [[:Category:Linux distributions|Linux distribution]] "live image".

== Implementation ==
XO uses a custom microchip for SD card access: the Camera and Flash Enabler (CaFE). CaFE includes SDHC support, which is hardware level compatible with SD. Pierre Ossman wrote the Linux driver support for SDHC and CaFE is driven by the sdhci driver. SD cards up to about 256 GB should be supported. CaFE follows the standard host controller interface for SD controllers.

=== SD standard ===
Again, see Wikipedia for a basic overview. SD block addressing works with a 32 bit address. In the CaFe chip, which is compatible with the standard "SDHCI" spec, the address goes in the 32-bit chip register at offset 8. For old SD cards (not the new SDHC cards), the address is a byte address, so the maximum size is 4 Gbytes. For the newer SDHC cards, the address is a block number, assuming 512 byte blocks, so the maximum size is 2 TBytes. In other words, SDHC just shifts the addresses by nine bits, allowing an effective 40 bit address. The 32 GB limit that's often written about is an artificial limit in Window's FAT formatter; Windows will use the generally incompatible NTFS file system instead. Linux can format FAT up to the ~300GB real limit just fine, after that the card will need to use a linux specific filesystem. None of this is CaFe-specific.

== Insertion==

To properly insert the SD/MMC/SDHC card the brass fingers on the card should be facing up and towards the front of the LCD screen. Insert the card until it is flush with the bottom of the screen, you will hear a click when the card is fully seated. It is a "Push to Click in and Push to Click out (Eject)" mechanism. When ejecting, push the card in again and release. It should come out far enough to grab with fingers, Try small tweezers if you have a hard time getting the card come out again. While not required, you can also attach a little piece of scotch tape to the SD card to give an easy handle to pull on the card when it sticks.

The picture below shows the proper way to insert the SD/MMC/SDHC card:


The picture shows the proper way to insert the card; your card might not have this many contacts, but it should be the same size and shape:


[[Image:Proper_SD_Card_Insertion.jpg]]
[[Image:Proper_SD_Card_Insertion.jpg]]
Line 45: Line 36:
== Troubleshooting ==
== Troubleshooting ==


* Try the same card in another device.
* When using multiple cards, make sure they have different Volume labels. The Volume labels [http://ubuntuforums.org/showthread.php?t=365661 are used in assigning a mount point]


* Try the same card in another XO laptop,
* There is a hidden folder the OLPC puts onto all mounted media, ".olpc.store/". A broken database there may keep the journal from working properly. Try removing the folder. You should always be able to see the device mounted using "df" in Terminal.


* Try a new card; if new cards don't work, there may be a fault with the laptop.
* Cards and USB sticks may need to be writable for Sugar to index them correctly. Make sure any read-only switch is in the read/write position and not the read-only position.


* Try rebooting; some cards have been found to work differently after a reboot.
* Be sure the cards are formatted as a FAT-16 or FAT-32 file system. Most new USB sticks and cards come FAT-formatted.


* Check which way round the card is; the card will only work when inserted the right way around, and broken slots may allow you to insert the card in either direction.
* If regular, brand-new cards and USB sticks are not working, it is possible there is something wrong with the hardware of your machine. You may want to [[Support_FAQ#What_is_the_warranty_info.3F_RMA_process.3F | contact the support line]] to see if it needs to be replaced (within the 30 day warranty period, if possible).


* Further diagnosis can be done using "dmesg | grep mmc" from the terminal shell.
* Another thing to try is a quick reboot of the OLPC. Hot-swapping cards can sometimes cause difficulty when booting with them already attached seems to work.


== Booting ==
* The SD/MMC/SDHC memory card will only mount when inserted properly into the XO laptop. Some (older?) slots may allow you to insert the card in either direction.


The XO laptop can boot from an SD card. OLPC OS can be installed onto a card. See [[Firmware/Storage#How_to_install_to_SD_card How to install to SD card]].
* Many error messages can be found running "dmesg | grep mmc" from the terminal shell.


=== Formatting (FAT 16 or 32) ===
== Formatting ==
(Adapted from support help answers)


SD cards are pre-formatted by their manufacturers to work best for the
SD cards are pre-formatted by their manufacturers to work best for the device. It is not recommended that you reformat unless it really stops working; for example, if a freshly booted Linux refuses to mount it.
device. It is not recommended that you reformat unless it really stops working; for example, if a freshly booted Linux refuses to mount it.


To reformat as FAT, see [[/Reformatting/Fat]]. May impact card performance.
Instructions for the command line in Terminal.


To reformat as ext2, see [[/Reformatting/Ext2]]. May impact card performance, and will certainly reduce portability with other devices.
The laptop doesn't come with the tools to format the SD card, so you will need to install them.
With access to the Internet, you can install them as ''root'' by typing:


== Implementation ==
$ yum install dosfstools
[[Hardware#XO-1_Laptop|XO-1]] uses a custom microchip for SD card access: the Camera and Flash Enabler (CaFE). CaFE includes SDHC support, which is hardware level compatible with SD. Pierre Ossman wrote the Linux driver support for SDHC and CaFE is driven by the sdhci driver. SD cards up to about 256 GB should be supported. CaFE follows the standard host controller interface for SD controllers.


[[XO-1.5]], [[XO-1.75]] and [[XO-4]] also support SD/MMC cards, but they don't use the CaFE ASIC.
This may take 5 to 10 minutes, then ask you if it's OK to download 71k of stuff,
type "y" to download and install the "mkdosfs" command.


== Standards ==
Insert your SD disk, check for current mount point, look for devices mounted in /media or /dev
See Wikipedia for a basic overview. SD block addressing works with a 32 bit address. In the CaFe chip, which is compatible with the standard "SDHCI" spec, the address goes in the 32-bit chip register at offset 8. For old SD cards (not the new SDHC cards), the address is a byte address, so the maximum size is 4 Gbytes. For the newer SDHC cards, the address is a block number, assuming 512 byte blocks, so the maximum size is 2 TBytes. In other words, SDHC just shifts the addresses by nine bits, allowing an effective 40 bit address. The 32 GB limit that's often written about is an artificial limit in Window's FAT formatter; Windows will use the generally incompatible NTFS file system instead. Linux can format FAT up to the ~300GB real limit just fine, after that the card will need to use a linux specific filesystem. None of this is CaFe-specific.


== See also ==
$ df

or

$ mount

Look for similar devices as "/dev/mmcblk0p1" (meaning the first ("zeroth") MMC/SD card, and the first partition of that card. )

Then unmount any file system from the card, so that "df" doesn't show the card any more.

$ umount /dev/mmcblk0p1

Then "mkdosfs -F 32 /dev/mmcblk0p1" should reformat it as a FAT32 file system. (Use -F for FAT16/FAT file system, however 2 GB size limit)

=== Formatting and using with ext2 ===

See the talk page.

==See also==
* [[wikipedia:Secure Digital card]] is a good overview of the standard.
* [[wikipedia:Secure Digital card]] is a good overview of the standard.
* [http://fakememorysentinel.wordpress.com/ fake flash products].
* [[USB drive]] - the XO-1 also has slots for USB drives such as USB flash drives, which you can access from the Journal and Terminal in a similar manner.
* [http://www.kingston.com/en/support/product_verification Kingston product verification].

* [[USB drive]] - the XO also has slots for USB drives such as USB flash drives.
* [[Swap]] explains how to use an SD card as swap to allow running more instances of more complicated applications than can fit in memory.
* [[SD and USB FLASH Drive Performance]]
* [[NAND Testing]]


[[Category:Hardware]]
[[Category:Hardware]]

Latest revision as of 23:22, 8 October 2013

The XO laptop has a slot for an SD card. Once inserted, the contents are shown by the Journal Activity or the GNOME file browser. See Journal for how to use an SD card in Sugar; you can move files to and from the card by dragging and dropping the file in the Journal view to the card icon at the bottom of the screen.

Using

  • Insert card into the slot at the bottom of the screen. See below for more detailed instructions.
  • In Sugar, a card icon will appear at the lower left of the Journal, and you can begin to use it.
  • In Gnome, an icon for the card will appear on the desktop, and a window will open showing the files on the card, and you can begin to use it.
  • When finished with the card, you must tell the computer before removing it, either;
  • click on it in the Journal and choose unmount,
  • click on it in the frame and choose unmount,
  • click the eject button in the GNOME file browser window, or;
  • right-click on the GNOME desktop icon and choose Eject.
If you remove the card without this step, pending changes to the card may not be written and some files may be left in a corrupted state.
  • Eject the card; push it in slightly until you feel a click, then release it.

Supported cards

  • Most cards work,
  • Some cards don't work,
  • Most filesystems work; such as FAT16, FAT32, ext2, ext3, ext4,
  • Some filesystems won't work, such as HFS+,
  • Most card sizes should work; but we have not tested them all,
  • Some cards work for file storage, but not for booting.

For deployments, carefully test a sample of the card being used.

Insertion

To properly insert the card the gold fingers on the card should be facing up and towards the front of the display. Insert the card until it is flush with the bottom of the screen, you will hear or feel a click when the card is fully seated. It is a "Push to Click in and Push to Click out (Eject)" mechanism. When ejecting, push the card in again and release. It should come out far enough to grab with fingers, Try small tweezers if you have a hard time getting the card to come out again. While not required, you can also attach a little piece of adhesive tape to the card to give an easy handle to pull on the card if it sticks.

The picture shows the proper way to insert the card; your card might not have this many contacts, but it should be the same size and shape:

Proper SD Card Insertion.jpg

--KenXo 11:28, 24 December 2007 (EST)

Troubleshooting

  • Try the same card in another device.
  • Try the same card in another XO laptop,
  • Try a new card; if new cards don't work, there may be a fault with the laptop.
  • Try rebooting; some cards have been found to work differently after a reboot.
  • Check which way round the card is; the card will only work when inserted the right way around, and broken slots may allow you to insert the card in either direction.
  • Further diagnosis can be done using "dmesg | grep mmc" from the terminal shell.

Booting

The XO laptop can boot from an SD card. OLPC OS can be installed onto a card. See Firmware/Storage#How_to_install_to_SD_card How to install to SD card.

Formatting

SD cards are pre-formatted by their manufacturers to work best for the device. It is not recommended that you reformat unless it really stops working; for example, if a freshly booted Linux refuses to mount it.

To reformat as FAT, see /Reformatting/Fat. May impact card performance.

To reformat as ext2, see /Reformatting/Ext2. May impact card performance, and will certainly reduce portability with other devices.

Implementation

XO-1 uses a custom microchip for SD card access: the Camera and Flash Enabler (CaFE). CaFE includes SDHC support, which is hardware level compatible with SD. Pierre Ossman wrote the Linux driver support for SDHC and CaFE is driven by the sdhci driver. SD cards up to about 256 GB should be supported. CaFE follows the standard host controller interface for SD controllers.

XO-1.5, XO-1.75 and XO-4 also support SD/MMC cards, but they don't use the CaFE ASIC.

Standards

See Wikipedia for a basic overview. SD block addressing works with a 32 bit address. In the CaFe chip, which is compatible with the standard "SDHCI" spec, the address goes in the 32-bit chip register at offset 8. For old SD cards (not the new SDHC cards), the address is a byte address, so the maximum size is 4 Gbytes. For the newer SDHC cards, the address is a block number, assuming 512 byte blocks, so the maximum size is 2 TBytes. In other words, SDHC just shifts the addresses by nine bits, allowing an effective 40 bit address. The 32 GB limit that's often written about is an artificial limit in Window's FAT formatter; Windows will use the generally incompatible NTFS file system instead. Linux can format FAT up to the ~300GB real limit just fine, after that the card will need to use a linux specific filesystem. None of this is CaFe-specific.

See also

Retrieved from "http://wiki.laptop.org/mediawiki/index.php?title=Secure_Digital_card&oldid=293055"