13.1.0: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
 
(41 intermediate revisions by 7 users not shown)
Line 1: Line 1:
{{outdated}}
13.1.0 is an in-development OLPC OS release, focusing on adding support for the XO-4 laptop and adding touch support to Sugar. The target platforms are [[Target platforms::XO-1]], [[Target platforms::XO-1.5]] (including XO-1.5 High School Edition), [[Target platforms::XO-1.75]] and [[Target platforms::XO-4]].

13.1.0 has been superceded by [[13.2.0]].

13.1.0 was an OLPC OS release focused on adding support for the XO-4 laptop and adding touch support to Sugar. The supported platforms were [[Target platforms::XO-1]], [[Target platforms::XO-1.5]] (including XO-1.5 High School Edition), [[Target platforms::XO-1.75]] and [[Target platforms::XO-4]].


The release plan can be found at [[/Release plan]].
The release plan can be found at [[/Release plan]].
Line 5: Line 9:
== Status ==
== Status ==


Status: [[Status::in development]] (see [[/Release plan]] and [[Release Process]]).
Status: [[Status::released]]


To be released on: [[Release date::2012-12-06]]
Released on: [[Release date::2013-05-06]]


Release notes: [[Release notes::Release notes/{{PAGENAME}}]]
Release notes: [[Release notes::Release notes/{{PAGENAME}}]]


Final build number: [[Build number::36]]
== Significant known issues ==

=== XO-4 ===
The bug tracker is http://dev.laptop.org under the milestone [http://dev.laptop.org/query?status=assigned&status=new&status=reopened&order=priority&col=id&col=summary&col=owner&col=type&milestone=13.1.0 13.1.0]

* No sound yet [http://dev.laptop.org/ticket/12155 #12155]
* No suspend/resume yet [http://dev.laptop.org/ticket/12147 #12147]
* Firmware on A models can't be upgraded. Please contact OLPC if you have not received a B model as a replacement.
* Disk space might be low [http://dev.laptop.org/ticket/12150 (#12150)]
* Occasional crashes requiring a long power button reset (?, reference needed)
* The trackpad occasionally stops working but the touchscreen still works (?, reference needed)
* The trackpad has click by tap activated (Manuq)
* The ambient light sensor is not supported yet (<trac>12243</trac>)
* No touchscreen on screen keyboard (OSK)from frame [http://dev.laptop.org/ticket/12082 #12082]
* yum wont work without --nogpg, checksum error [http://dev.laptop.org/ticket/12164 #12164]

XO-4 firmware doesn't automatically update yet. If running Q7B01, upgrade manually to e.g. [http://dev.laptop.org/pub/firmware/q7b02/q7b02.rom q7b02] at the [[ok]] prompt:
ok flash u:\q7b02.rom

Once you are at Q7B02 or later you can trigger the usually-automated firmware update from the OS install, at the [[ok]] prompt:
ok false to require-signatures?
ok " \boot" pn-buf place
ok " int:" load-from-list

=== Misc ===

* Modem dongle does not appear in frame (?, reference needed)
* Other laptops & shared activities do not appear in the network view
* missing activity icons in top of frame ([http://bugs.sugarlabs.org/ticket/4102 SL#4102])
* Gnome Applications menu is empty (?, reference needed)
* Gnome Switch to Sugar fails (?, reference needed)


== Download and installation ==
== Download and installation ==


Download and installation instructions can now be found in the [[Release notes/{{PAGENAME}}|release notes]].
Development builds are available here:
* http://build.laptop.org/13.1.0

New builds are announced on the devel mailing list.

=== XO-1.75, XO-1.5 and XO-4 ===
To install from Open Firmware on an unlocked [[XO-1.5]] or [[XO-1.75]], download a .zd file to a USB drive.

Insert the USB drive into the XO, get to the [[Ok]] prompt and type:

fs-update u:\X.zd

Where X.zd is the file you downloaded, for example 31001o1.zd (for XO-1.5), 31001o2.zd (for XO-1.75) or 31001o4.zd (for XO-4).

=== XO-1 ===

To install from Open Firmware on an unlocked [[XO-1]], download the .img and .crc files to a USB drive.

Insert the USB drive into the XO-1, get to the [[Ok]] prompt and type:
copy-nand u:\X.img
where X.img is the .img file you downloaded, for example 31001o0.img.

== Online upgrade ==

For updating from a previous release to a 13.1.0 development build, or from one 13.1.0 development build to another, you can use olpc-update. For example, to update to build 1, run one of the commands below in the Terminal activity, depending which laptop model you are using:

sudo olpc-update 13.1.0d_xo4-1
sudo olpc-update 13.1.0d_xo1.75-1
sudo olpc-update 13.1.0d_xo1.5-1
sudo olpc-update 13.1.0d_xo1-1


== Developers ==
== Developers ==


The release is built with [[Build system::OS Builder]] version [[Build system version::6.0.x (master)]] under [[Build platform::Fedora 18]], using <tt>f18-xo1.ini</tt>, <tt>f18-xo1.5.ini</tt>, <tt>f18-xo1.75.ini</tt> and <tt>f18-xo4.ini</tt> at this point in the development process. The <tt>f18</tt>, <tt>f18-xo1</tt>, <tt>f18-xo1.5</tt>, <tt>f18-xo1.75</tt> and <tt>f18-xo4</tt> [[RPM Dropbox|RPM dropboxes]] are used.
The release was built with [[Build system::OS Builder]] version [[Build system version::6.0.x]] under [[Build platform::Fedora 18]].

=== Fedora package inclusion process ===

For contributions in the form of updated RPM packages that are part of Fedora, the process is a little complicated due to the fact we work with multiple architectures and ARM is not yet a primary Fedora architecture.

The entire process is explained below. However, only the first and last steps are required. Feel free to skip some or all of the remaining steps - just make sure you leave a note on an "add to build" ticket noting which steps you have done. Daniel and Peter are more than happy to take on the packaging work on your behalf, and they can lump it into batches.

# Produce source tarball, upload to relevant place.
# Commit spec file to Fedora git, push and build for x86
#* Commit your change on both the f17 and master branch. <small>Suggestion: commit on F17 branch, then use <tt>git merge</tt> to fast-forward master to the same commit.</small>
#* Ensure you are on the f17 branch.
#* <tt>fedpkg push</tt>
#* <tt>fedpkg build</tt>
# Submit an update for F17.
#* <tt>fedpkg update</tt>
# When bodhi emails you saying that your F17 update can be pushed to stable, push it.
# Put the relevant trac ticket in "add to build" state, noting which of the above steps you have completed.

ARM is intentionally left out of the picture here. Your package will be built automatically on ARM after a day or so. (Sometimes the build manager will build it manually in order to avoid the wait).

=== Non-Fedora package inclusion process ===

For packages that are maintained outside of Fedora, the inclusion process is:

# Build, test and publish the RPM (including source RPM) inside the relevant [[RPM dropbox]].
# Put the relevant trac ticket in "add to build" state with a request for inclusion

=== Activity inclusion process ===

At this time, the build system pulls the latest 0.98-compatible activity versions directly from http://activities.sugarlabs.org.

== Bug reports ==

We are now looking for bug reports on all levels - system, Sugar, activities, ...

Sugar-specfic bugs and activity issues should be filed at http://bugs.sugarlabs.org. System-related bugs should be filed at http://dev.laptop.org. If in doubt, ask on the mailing list first, or file at OLPC and let us take care of it for you.

For OLPC tickets, leave the milestone field blank but mention clearly that you are testing 13.1.0, your bug report will then be triaged into the appropriate place.


[[Category:Releases]]
[[Category:Releases]]

Latest revision as of 21:37, 2 December 2013

The contents of this page are considered outdated and some of the information may be stale. Please use information here with caution, or update it.

13.1.0 has been superceded by 13.2.0.

13.1.0 was an OLPC OS release focused on adding support for the XO-4 laptop and adding touch support to Sugar. The supported platforms were Target platforms::XO-1, Target platforms::XO-1.5 (including XO-1.5 High School Edition), Target platforms::XO-1.75 and Target platforms::XO-4.

The release plan can be found at /Release plan.

Status

Status: Status::released

Released on: Release date::2013-05-06

Release notes: Release notes::Release notes/13.1.0

Final build number: Build number::36

Download and installation

Download and installation instructions can now be found in the release notes.

Developers

The release was built with Build system::OS Builder version Build system version::6.0.x under Build platform::Fedora 18.