XO Stick/Bootloader: Difference between revisions

Latest revision as of 09:11, 19 March 2013

This page is work in progress.

An Arduino can be used as a programmer. This is based on [1]

Pinout, using a Duemilanove as the programmer and XO Stick as the target

Burning the bootloader with an Arduino

Download the ArduinoISP program to the Arduino which you are using as the programmer.

Arduino only supports the ATMega chips. There's some progress on ATtiny support but it's not stable yet. This is the project we've been following:

This was replaced by https://github.com/Bluebie/micronucleus-t85 ... but it isn't clear how to program this into an XO Stick yet. Has anyone done it? --Quozl 09:11, 19 March 2013 (UTC)

@@ Line 1: / Line 1: @@
+This page is work in progress.
 An Arduino can be used as a programmer. This is based on [http://arduino.cc/en/Tutorial/ArduinoISP]
@@ Line 9: / Line 11: @@
 ''Burning the bootloader with an Arduino''
-Download the ArduinoISP program to the Arduino which you are using as the programmer, then select your target board type under tools/Board (at the moment 861 is not supported) then Tools/Burn Bootloader
+Download the ArduinoISP program to the Arduino which you are using as the programmer.
+Arduino only supports the ATMega chips.  There's some progress on
+ATtiny support but it's not stable yet.  This is the project we've
+been following:
+http://embedded-creations.com/projects/attiny85-usb-bootloader-overview/
+:This was replaced by https://github.com/Bluebie/micronucleus-t85 ... but it isn't clear how to program this into an XO Stick yet.  Has anyone done it?  --[[User:Quozl|Quozl]] 09:11, 19 March 2013 (UTC)
-(because the 861 is not supported I get avrdude: Expected signature for ... is ... Double check chip, or use -F to override this check.)