Multi channel battery charger: Difference between revisions

From OLPC
Jump to navigation Jump to search
Line 55: Line 55:
* '''Stackable'''. More vertical space is available than floor sq footage so an idea was to make them stackable. But see above point.
* '''Stackable'''. More vertical space is available than floor sq footage so an idea was to make them stackable. But see above point.


* '''Heat dissipation'''. Each battery needs 16W and most of that power will be dissipated into the battery. I expect the electronics/battery to dissipate less than 1W/battery. PSU at 300W @ 85% efficiency is 45W.
* '''Heat dissipation'''. Each power supply stage is about 85% and there are 2 stages for a total efficiency of 72% So while on DC heat dissipation will be around 58 Watts and on AC around 88 Watts.


* '''Enclosure'''. Metal. Except perhaps for some plastic for the battery holder. Having metal available to heatsink to should help in keeping the electronics from burning up in hot countries.
* '''Enclosure'''. Metal. Except perhaps for some plastic for the battery holder. Having metal available to heatsink to should help in keeping the electronics from burning up in hot countries.

Revision as of 16:01, 18 May 2008


  This page is monitored by the OLPC team.


Pencil.png NOTE: The contents of this page are not set in stone, and are subject to change!

This page is a draft in active flux ...
Please leave suggestions on the talk page.

Pencil.png

Multi Channel Battery Charger

aka the "SuperCharger"

See Product News for product availability.

Multi-Battery (Gang)Charger

Specifications and Features

  • 15 batteries per unit.
  • Charge batteries in 2 hours
  • AC (120/240V) and DC operation
  • Operates at 50 degrees Centigrade ambient temperature
  • External laptop power DC cables.
    • 2 of the XO DC power cables available to the kids so they they can power their laptops while they switch batteries. This keeps them from having to turn off the laptops to switch batteries.
  • Bi-Color indicator LED per battery channel
    • Red Led and Green Led. Same color setup as the XO laptop. Red, Green, and Yellow when both are enabled.

Future

  • RJ45 10/100 ethernet connection

Electrical Input Requirements

  • AC Power 100V-230V. 300W
  • DC 10V-28V. 120W

Exterior Connections

  • AC In: IEC for 120/220VAC
  • DC In: 10VDC to 28VDC 2 Pin connector that mates with whats on the GP solar blanket.
  • USB B connector (Its a USB device)
  • 2 cables with XO DC jacks on them

Electrical Misc

Software

Mechanical

  • Density. Getting as many batteries as possible in as small a footprint is a goal.
  • Physical Safety. Its got to be stable and hold lots of heavy batteries but not be able to fall over on top of a child. Who might be trying to climb on it to get his battery.
  • Stackable. More vertical space is available than floor sq footage so an idea was to make them stackable. But see above point.
  • Heat dissipation. Each power supply stage is about 85% and there are 2 stages for a total efficiency of 72% So while on DC heat dissipation will be around 58 Watts and on AC around 88 Watts.
  • Enclosure. Metal. Except perhaps for some plastic for the battery holder. Having metal available to heatsink to should help in keeping the electronics from burning up in hot countries.

Datasheets