XS Recommended Hardware

Please copy/paste "{{Translationlist | xx | origlang=en | translated={{{translated}}}}}" (where xx is ISO 639 language code for your translation) to XS Recommended Hardware/translations

HowTo [ID# 146917]  +/-

  This page is monitored by the OLPC team.

This is a description of the hardware recommended for the School server. Unlike the current laptop, the school server is currently off-the-shelf (OTS) hardware. This document outlines general criteria for the School Server and has some specific notes about what we recommend for the XS.

Overview

Overall considerations

• Known to be compatible with Fedora (Fedora 7 / Fedora 9) which is a modern Linux distribution.
• Low power consumption
• Operation in environmentally challenging conditions

Hardware known to work

This hardware has been tested with the XS images - add your own, if possible with notes as to its suitability for the rule

• HP/Compaq dx2250 - used by Martin Langhoff as test XS, low memory. Is RH-certified, and ships with a factory RH install.
• Laptop Dell Latitude D380 - used by Martin Langhoff as test XS.
• Dell PowerEdge SC440 - used by Martin Langhoff as test XS.

As our work is based on a Fedora Linux, the Hardware compatibility notes for Fedora and RH systems is the best guide. See:

• RedHat's Certified Hardware list
• Notes on HCLs for Fedora and Smolt
• Fedora HCL - appears temporarily abandoned, but Smolt stats can be of use to see whether a particular HW is used in the field with Fedora systems - see the stats page - the project page explains how it works.

Hardware Profile

• 1GHz+ x86 processor
• 1+ GB main memory
• Four to six USB interfaces, with power for three Marvell Wifi nodes and an external disk drive.
• One 300GB+ 3.5in SATA drive (500 GB makes more sense right now)
• Power and space for a second disk drive
• Two 100baseT network interfaces (one will do in some cases)
• Minimal fans
  • replace them with heatsinks where possible
  • easily replaceable
• Minimal openings in the case to avoid dust, etc
• Test it in the heat - should work in up to 50 deg C

Scaling up

For larger schools, add RAM, disk storage and CPU (in that order).

Environmental notes

The location where the HW will be deployed determines the environmental requirements. Our guidelines are as follows:

• Temperature: Should meet the same environmental specifications for temperature as the laptop. This is 50 C ambient.
• Dust: For dusty environments, the hardware should be in an enclosure without vents, have no fans, and have protection for ports such as USB ports.
• Water, humidity: For humid environments the server should be capable of long-term operation in a constantly humid (100%) environment.
• Connectors and buttons should be resistant to water and dust intrusion. Buttons should be sealed against water, and connectors located and cables dressed to prevent water intrusion.

Other considerations

• Mounting: the hardware should be able to run from a flat surface or be mounted on a wall and/or hangable.
• Drop and Shake: should meet higher drop and shake specifications than standard consumer desktop PCs, to account for rough transport in the delivery.

XSX Specifications

OTS systems builders should aim for these XSX specs:

• 1GHz+ x86 processor
• 1+ GB main memory
• Four to six USB interfaces, with power for three Marvell Wifi nodes and an external disk drive.
• One 300GB+ 3.5in SATA drive (500 GB makes more sense right now)
• Power and space for a second disk drive
• Two 100baseT network interfaces (one will do in some cases)
• Minimal fans
  • replace them with heatsinks where possible
  • easily replaceable
• Minimal openings in the case to avoid dust, etc
• Test it in the heat - should work in up to 50 deg C
• Test the actual network performance

There are many hardware platforms meeting these specifications. We are working on a recommendation for a low power version.