Datasheets: Difference between revisions
Jump to navigation
Jump to search
m (Spec sheets moved to Datasheets) |
(→Current datasheets: Add pointers to some existing datasheets) |
||
| Line 2: | Line 2: | ||
== Current datasheets == |
== Current datasheets == |
||
=== [[Btest_Boards|C-Build Datasheets]] === |
|||
See the [[Btest_Boards|C-Build Datasheets]] page for these datasheets: |
|||
*SDRAM 1Mx16 |
|||
:*ETI EM6A6165TS-7G |
|||
:*ISSI IS42R16100C1 |
|||
:*ESMT M12S16161A |
|||
* DDR SDRAM |
|||
:*Hynix HY5DU561622ETP-J |
|||
:*PowerChip Semiconductor A2S56D40CTP-G6L |
|||
:*Winbond W9425G6DH-6 |
|||
:*Qimonda (Infineon) HYB25DC256160CE-6 |
|||
:*Nanya NT5DS16M16CS-6K |
|||
:*Elpida EDD2516AETA-6B-E |
|||
:*Samsung K4H561638H-UC/LB3 |
|||
:*256 MiB configuration: PowerChip Semiconductor A3S12D30/40ETP |
|||
* NAND FLASH 4Gb |
|||
:*Hynix HY27UF084G2M-TPCB |
|||
Samsung K9F4G08U0M-PCB0 |
|||
:* SPI FLASH ROM |
|||
:*Spansion S25FL008A0LMFI003 |
|||
:*Winbond W25X80 |
|||
=== Other datasheets === |
|||
*[[Media:DS2756.pdf]] DS2756 High-Accuracy Battery Fuel Gauge with Programmable Suspend Mode from Dallas Semiconductor Maxim |
|||
*[[Media:88ALP01_Datasheet_July_2007.pdf]] - DS2756 High-Accuracy Battery Fuel Gauge with Programmable Suspend Mode from Marvell |
|||
*[[Media:At91sam7x128_256_pc.pdf]] - AT91 ARM® Thumb®-based Microcontrollers AT91SAM7X256/AT91SAM7X128 from Atmel |
|||
*[[Media:CL1_NAND_Micron.pdf]] - NAND Flash Memory MT29F4G08AAA, MT29F8G08BAA, MT29F8G08DAA, MT29F16G08FAA from Micron |
|||
*[[Media:CL1_NAND_ST.pdf]] - NAND04GW3B2B/NAND08GW3B2A 4 Gbit, 8 Gbit, 2112 Byte/1056 Word Page 3V, NAND Flash Memories from STMicroelectronics |
|||
== Requests for datasheets == |
== Requests for datasheets == |
||
If you want the spec for a piece of hardware, please post it here, and [[user:smithbone|Richard]] will try to get back to you asap. |
If you want the spec for a piece of hardware, please post it here, and [[user:smithbone|Richard]] will try to get back to you asap. |
||
Revision as of 19:11, 19 November 2008
Basic specification sheets for hardware are mainly public for every part of the XO. Many have been uploaded to this wiki; please help aggregate them below.
Current datasheets
C-Build Datasheets
See the C-Build Datasheets page for these datasheets:
- SDRAM 1Mx16
- ETI EM6A6165TS-7G
- ISSI IS42R16100C1
- ESMT M12S16161A
- DDR SDRAM
- Hynix HY5DU561622ETP-J
- PowerChip Semiconductor A2S56D40CTP-G6L
- Winbond W9425G6DH-6
- Qimonda (Infineon) HYB25DC256160CE-6
- Nanya NT5DS16M16CS-6K
- Elpida EDD2516AETA-6B-E
- Samsung K4H561638H-UC/LB3
- 256 MiB configuration: PowerChip Semiconductor A3S12D30/40ETP
- NAND FLASH 4Gb
- Hynix HY27UF084G2M-TPCB
Samsung K9F4G08U0M-PCB0
- SPI FLASH ROM
- Spansion S25FL008A0LMFI003
- Winbond W25X80
Other datasheets
- Media:DS2756.pdf DS2756 High-Accuracy Battery Fuel Gauge with Programmable Suspend Mode from Dallas Semiconductor Maxim
- Media:88ALP01_Datasheet_July_2007.pdf - DS2756 High-Accuracy Battery Fuel Gauge with Programmable Suspend Mode from Marvell
- Media:At91sam7x128_256_pc.pdf - AT91 ARM® Thumb®-based Microcontrollers AT91SAM7X256/AT91SAM7X128 from Atmel
- Media:CL1_NAND_Micron.pdf - NAND Flash Memory MT29F4G08AAA, MT29F8G08BAA, MT29F8G08DAA, MT29F16G08FAA from Micron
- Media:CL1_NAND_ST.pdf - NAND04GW3B2B/NAND08GW3B2A 4 Gbit, 8 Gbit, 2112 Byte/1056 Word Page 3V, NAND Flash Memories from STMicroelectronics
Requests for datasheets
If you want the spec for a piece of hardware, please post it here, and Richard will try to get back to you asap. (If you want a spec for software, see Software.)
- DC connector
- there is now a drawing for this, and a part # for a matching connector, which you'll soon be able to get via Richard for a few dollars
- on-board EC monitor
This article is a stub. You can help the OLPC project by expanding it.