Wireless access point compatibility: Difference between revisions
Jump to navigation
Jump to search
(+a netgear report, with settings that worked.) |
(added wrt54g v4 with dd-wrt info) |
||
| Line 26: | Line 26: | ||
| Yes |
| Yes |
||
| Use channel 1, 6, or 11 (see [[Wifi_Connectivity#Channel]]). |
| Use channel 1, 6, or 11 (see [[Wifi_Connectivity#Channel]]). |
||
|- |
|||
| [http://www.linksys.com Linksys] |
|||
| WRT54G V4 |
|||
| DD-WRT v23 SP2 micro |
|||
| Yes |
|||
| WEP connects fine all channels, WPA2 via wpa.sh script. |
|||
|- |
|- |
||
| [http://www.linksys.com Linksys] |
| [http://www.linksys.com Linksys] |
||
Revision as of 04:22, 19 February 2008
| Manufacturer | Model | Firmware | Tested | Notes |
|---|---|---|---|---|
| Linksys | WAG54G V2 | 1.01.22 | Yes | Tested with no security; also with WAP |
| Linksys | WCG200-CC | Yes | Tested with no security; also with WEP 128 passphrase. See Sharing_User_Experiences_with_OLPC_XO_Wifi_Connectivity_-_Glew_2007_Jan for trick. | |
| Linksys | WRT54G | 4.21.1 1/20/2007 | Yes | Use channel 1, 6, or 11 (see Wifi_Connectivity#Channel). |
| Linksys | WRT54G V4 | DD-WRT v23 SP2 micro | Yes | WEP connects fine all channels, WPA2 via wpa.sh script. |
| Linksys | WRT54GL | OpenWRT WhiteRussian (RC4) | Yes | tested using no security (MAC based access control) on channel 3 |
| Linksys | WRT54GL | v4.30.11, Aug. 7, 2007 | Yes | WPA2 via Wpa.sh, G-only on channel 6 |
| Actiontec | MI424WR | Unknown | Yes | |
| D-Link | DIR-615 | 2.20 | Yes | worked with WPA2 (personal) and the Wpa.sh script |
| 2Wire | 3800HGV-B Gateway | 5.29.105.76 | Yes | ATT Uverse supplied, changed WPA to WEP-open and assigned to channel 8 as opposed to Automatic |
| 2Wire | 2700HG-B GATEWAY | 4.25.19 | Unsecured | Didn't work / couldn't find on channel 4. Changed to channel 5 and XO found it and connected just fine. Unsecured network. |
| Airlink 101 | AR525W | v1.0.50 | Yes | Used WEP-Open with 128-bit hex key password |
| Apple | AirPort Express | 6.3 | Yes | For WEP provide passphrase and select: ASCII + Shared key |
| TRENDnet | TEW432BRP_c1 | v2.00.0012 | WEP | Does not show up in neighborhood until you attempt to connect to another WAP (e.g. at a neighbors house). The Trendnet then immediately shows up, and you can connect to it instead. Is on channel 9, maybe 1,6,11 would work better. |
| Westell | D90-327W15-06 | VER:4.03.02.04 | Yes | Security: WEP, Type: Open System, 128-bit key password (13 characters) |
| FON | La Fonera 2100E | Release: 0.7.1.2 | Yes | Security: WEP, Type: Open System, 64-bit key password |
| NETGEAR | WPN824v2 | V2.0.10_1.2.17 | Yes | G1G1 Tested WEP 128-bit PSK with 1.2.17 firmware (XO builds 650, 653), WPA2 CCMP PSK with 2.0.10 firmware (on build joyride-1500). Saw occasional failures to connect. When switching from WEP to WPA2, had to wipe out /home/olpc/.sugar/default/nm/networks.cfg, use the Wpa.sh script, and reboot. Working fine now. |
| NETGEAR | WGT624v3 | ? | "Tested"?? | B4, joyride 1597, q2d10. The following settings worked (some others did not). On the router: Name: lettersonly, Channel: 11, Mode: g only, Security Options: WEP, Authentication type: Shared key, Encryption Strength: 128bit, Key 1. On the XO: Key Type: Hex, key: <the same as router Key 1>, Authentication Type: Shared Key. |
| Zyxel | P-660HW-D1 | Version: V3.40(AGL.4) | Yes | No security |