Tests/other/Battery: Difference between revisions
< Tests
Jump to navigation
Jump to search
(New page: {{Test case |testcase_name=Battery life logging |testcase_category=other |testcase_subcategory=Battery |testcase_stream=8.2, Any |testcase_component=Battery life and power draw |testcase_f...) |
m (fixing link) |
||
| Line 10: | Line 10: | ||
|testcase_setup=Make sure the XO has the build and Activities you want to test installed. Plug in the XO until the battery is at the charge level you desire (in most cases, this will be until it's fully charged). |
|testcase_setup=Make sure the XO has the build and Activities you want to test installed. Plug in the XO until the battery is at the charge level you desire (in most cases, this will be until it's fully charged). |
||
|testcase_procedure=# Start the Activities you want to test. |
|testcase_procedure=# Start the Activities you want to test. |
||
# Start the [[ |
# Start the [[XO_power_draw#How_to_use_it|olpc-pwr-log]] script; be sure to start it in the VT or in Terminal depending on whether you want the XO to suspend or not. |
||
# Unplug the XO and wait until the battery has been fully discharged (the XO will power down). This usually takes 4+ hours. |
# Unplug the XO and wait until the battery has been fully discharged (the XO will power down). This usually takes 4+ hours. |
||
# Return power to the XO by plugging it in or putting in a fresh battery. |
# Return power to the XO by plugging it in or putting in a fresh battery. |
||
Revision as of 16:48, 18 September 2008
| Stream | ,|x|Build stream::x}} | ||
|---|---|---|---|
| Category | Test category::other | Sub-category | Test subcategory::Battery |
| Component | System component::Battery life and power draw | ||
| Feature | System feature::http://wiki.laptop.org/go/XO_power_draw | ||
| Objective | Test objective::Check how long the battery lasts for a given build running given sets of Activities; also checks that the build has the ability to monitor battery life through olpc-pwr-log. | ||
| Tools | Test tools::XO | ||
| Setup | Test setup::Make sure the XO has the build and Activities you want to test installed. Plug in the XO until the battery is at the charge level you desire (in most cases, this will be until it's fully charged). | ||
| Procedure | [[Test procedure::# Start the Activities you want to test.
| ||
| Expected Results and Pass Criteria |
[[Pass criteria::The battery should run out and the XO should power down several hours after you unplug it, and you should be able to recover, read, and understand the olpc-pwr-log logfile. There is no specific length of time the battery should last unless you are told otherwise.]] | ||
| Comments | More notes:: | ||
| Release | Stream | Build | Pass/Fail | Trac Ticket(s) | Comment(s) | Date of Test |
|---|---|---|---|---|---|---|
| Software release::Candidate | Build stream::8.2 | Build number::760 | PassFail::Pass | ,|x| #x}} | Comments::Started olpc-pwr-log on 20 laptops in VT (no suspend); currently running and generating logs nicely. Will post logs here when they're done being generated. | Created::
|