XO1.75 A2 A3 Changes: Difference between revisions
Jump to navigation
Jump to search
(→eMMC) |
No edit summary |
||
| Line 1: | Line 1: | ||
These are the changes planned for the XO-1.75 B1 prototype, from the [[XO_1.75_A2|A2 |
These are the changes planned for the [[XO_1.75_B1|XO-1.75 B1 prototype]], from the [[XO_1.75_A2|A2 prototypes]]. |
||
=A2 Electrical Fixes= |
=A2 Electrical Fixes= |
||
Revision as of 06:57, 9 January 2011
These are the changes planned for the XO-1.75 B1 prototype, from the A2 prototypes.
A2 Electrical Fixes
These changes fix problems in the A2 prototypes:
SD power
These correct a mistake in Embedded Controller pin assignments for the SD power control signals.
- Depopulate R335 and R345.
- Remove Q16, and short pins 2 and 3 (marked I and O).
- Remove Q16, and short pins 2 and 3 (marked I and O).
VMEM stability
This corrects an undercompensation of the +1.5V memory power supply, and also delays the turn-on of the memory termination power supply.
- Change PR49 to 22K.
- Change PR52 to 47K.
- Populate PC37 with 0.1 uF.
eMMC
- Populate R95 with 10K.
- Connect BOOT_DEV_SEL to CN21.10
- Use +3.3V_SD1 to power the eMMC instead of +3.3V_NAND