IIAB/FAQ: Difference between revisions

From OLPC
Jump to navigation Jump to search
Line 1,006: Line 1,006:
Small-scale implementers should consider free services like https://ngrok.com and similarly https://dataplicity.com (in the past https://serveo.net was useful but is often offline in 2019/2020) to expose your server to the Internet, permitting maintenance via ssh and http. Or ask us about IIAB's own XSCENET, which is a minimal remote management solution (with a much more basic remote console, enabling ssh and http among a trusted group). Contact holt @ unleashkids.org for details.<!-- If you are using XSCENET, the "iiab-remote-on" command is generally equivalent to "systemctl enable openvpn@xscenet; systemctl start openvpn@xscenet" and the "iiab-remote-off" command is generally equivalent to "systemctl disable openvpn@xscenet; systemctl stop openvpn@xscenet". If you do not yet have these commands, you can implement them as aliases within /root/.bashrc -->
Small-scale implementers should consider free services like https://ngrok.com and similarly https://dataplicity.com (in the past https://serveo.net was useful but is often offline in 2019/2020) to expose your server to the Internet, permitting maintenance via ssh and http. Or ask us about IIAB's own XSCENET, which is a minimal remote management solution (with a much more basic remote console, enabling ssh and http among a trusted group). Contact holt @ unleashkids.org for details.<!-- If you are using XSCENET, the "iiab-remote-on" command is generally equivalent to "systemctl enable openvpn@xscenet; systemctl start openvpn@xscenet" and the "iiab-remote-off" command is generally equivalent to "systemctl disable openvpn@xscenet; systemctl stop openvpn@xscenet". If you do not yet have these commands, you can implement them as aliases within /root/.bashrc -->


NOTE: Developers' ssh keys traditionally used to come included with [http://tinyurl.com/iiabimages install images], to enable remote support during Beta programs and similar. Read "[[#What_security_tips_exist?|What security tips exist?]]" if you want instructions to remove these keys.
NOTE: Developers' ssh keys traditionally used to come included with <!-- [http://tinyurl.com/iiabimages --> [https://github.com/iiab/iiab/wiki/Raspberry-Pi-Images:-Summary install images], to enable remote support during Beta programs and similar. Read "[[#What_security_tips_exist?|What security tips exist?]]" if you want instructions to remove these keys.


Beginners and those with a graphical desktop environment (like X Windows) on their Internet-in-a-Box often take advantage of [https://en.wikipedia.org/wiki/TeamViewer TeamViewer] for full visual/remote support. This can be priceless when mentoring/learning at a distance, thanks to TeamViewer's screen-sharing, keyboard-sharing and mouse-sharing, to onboard new operators who are not yet able to navigate GNU/Linux and its command line tools. In a graphical desktop environment, simply [https://www.teamviewer.com/en/download/linux/ install TeamViewer], which by default randomizes TeamViewer's password (needed for remote access) every time TeamViewer is launched, preserving local operator control.
Beginners and those with a graphical desktop environment (like X Windows) on their Internet-in-a-Box often take advantage of [https://en.wikipedia.org/wiki/TeamViewer TeamViewer] for full visual/remote support. This can be priceless when mentoring/learning at a distance, thanks to TeamViewer's screen-sharing, keyboard-sharing and mouse-sharing, to onboard new operators who are not yet able to navigate GNU/Linux and its command line tools. In a graphical desktop environment, simply [https://www.teamviewer.com/en/download/linux/ install TeamViewer], which by default randomizes TeamViewer's password (needed for remote access) every time TeamViewer is launched, preserving local operator control.

Revision as of 21:21, 10 December 2020

This IIAB XSCE content does not reflect the opinion of OLPC. These pages were created by members of a volunteer community supporting OLPC and deployments.

How does Internet-in-a-Box (IIAB) help?

Bring the power of a free Digital Library of Alexandria into the hands of any school worldwide! Please listen to the 23min BBC podcast "How to put the internet in a box" from 2020-10-20. Internet-in-a-Box (IIAB) is also used in medical clinics and libraries, as can be seen in this Dominican Republic video.

Please see our internet-in-a-box.org web site!

Whether costing $30 or $300, an Internet-in-a-Box "knowledge hotspot" brings your classroom/school laptops together, communicating & coordinating learning in ways that deeply empower kids, teachers and community.

Internet-in-a-Box arose from One Laptop Per Child's original school server (2007-2012) and our global grassroots community, together adding quality content and learning apps shared by the best educational systems worldwide. Today this allows everyone to build up their local community's very own 21st century digital library, as this FAQ document now outlines, to help you make that happen!

Please do consider creating your own Internet-in-a-Box [1] [2] by reviewing some live demo examples and looking over our growing collection of HOW-TO videos.

We are proud that IIAB is built by a global network of professional volunteers, inspired by One Laptop per Child's famous laptops and their innovative Sugar Learning Platform — but now with a wider vision of serving all, both in schools and beyond!

See: Where can I see live demos of Internet-in-a-Box?
See: Is a quick installation possible?

Where is Internet-in-a-Box used?

Internet-in-a-Box (IIAB) was originally called the OLPC School Server Community Edition (XSCE) and is in use in more than twenty countries, from smaller communities to large-scale institutional deployments.

Examples include orphanages and schools in Haiti, to schools across southern Mexico, to rural communities and libraries across southwest Ghana, to remote schools in Myanmar/Burma and Cambodia, to villages across India, to a girls science school in Rwanda, to community centers in Kenya, to a youth community in rural Malaysia, to South Africa townships -- as well as broad Central American deployments like Nicaragua, Costa Rica, and the Dominican Republic.

Libraries and rural medical clinics are also avid users of IIAB, in places like Guatemala, the Dominican Republic and this growing list !

Many contributors are also using IIAB for more personal/grassroots and home library purposes too, helping refine our community product for increasingly diverse and larger impacts!

See: Where can I see live demos of Internet-in-a-Box?
See: Is a quick installation possible?

What can I do with E-books and Internet-in-a-Box?

The first step is to add content gems to your Internet-in-a-Box (IIAB).

Learn how to download high-quality free content, like Wikipedia ZIM files.

Or add content from your own USB disk or USB flash drive. Sharing or purchasing a hard-drive packed full of incredible Wikipedia + Maps + Literature + Khan Academy learning resources is also possible. Contact http://unleashkids.org volunteers should this be necessary.

Either way, this opens up entirely new opportunities for semi-connected schools and offline libraries worldwide, unleashing the best of Internet learning without costs or distractions. Medical clinics, museums and progressive prisons are also taking advantage, as well as individual educators and parents taking charge by building their own "Library of Alexandria" community hotspots.

How can kids best take advantage of these crown jewels of learning? After you've added content, you can offer your students direct access to different kind of content, using links like:

 http://box            Your Internet-in-a-Box Library!
 http://box/usb        Content from USB sticks/drives, that teachers can insert anytime
 http://box:8008       KA Lite (Khan Academy videos & exercises, with its own content downloader)
 http://box:8080       Calibre E-Book Library: see FAQ, calibredb manual, calibre-server manual (see Calibre-Web below)
 http://box/maps       OpenStreetMap and Satellite Photos for your Continent, or the entire World 
 http://box/docs       FUTURE synonym for http://box/nextcloud ?
 http://box/wiki       MediaWiki 1.35 LTS ETA mid-Sept 2020 (Wikipedia's own wiki software for document collaboration, used to use http://box/mediawiki)
 http://box/elgg       Elgg social network for e-learning
 http://box/info       IT support docs & eventually vids, offlined for all
 http://box/kiwix      Kiwix: amazing content & videos, contained in searchable ZIM files
                         WARNING: use http://box:3000/kiwix/ to avoid the Apache/NGINX proxy e.g. for enhanced privacy #852
 http://box/books      Calibre-Web E-Book Library, an alternative to Calibre (above) with a modern interface: #816
 http://box/moodle     Moodle 3.9 LTS (learning management system)
 http://box/lokole     Lokole is an Email service that works offline for rural communities, students and teachers.
 http://box/kolibri    Kolibri 0.14+ is like KA Lite; will allow educators to customize+remix Content Packs. Also try: http://box:8009
 http://box/nodered    Node-RED visual programming for electronics projects (IoT)
 http://box/wordpress  WordPress 5.5+ (blogging & community publishing)
 http://box/mediawiki  Redirects to http://box/wiki (see above)
 http://box/nextcloud  Nextcloud 20+ ETA 2020-10-03 (students can store their files/photos on Internet-in-a-Box, like Dropbox and Google Drive)
 http://box/runestone  Runestone Interactive Textbooks (proposed, example)
 http://box/sugarizer  Sugar Learning Platform originally from One Laptop Per Child

Common network ports are listed in our high-level networking summary. Internet-in-a-Box administrators can also benefit from these web tools:

 http://box:9091       Transmission BitTorrent downloader, for KA Lite content provisioning etc
 http://box/admin      Admin Console to install content & configure IIAB. Also try http://box.lan/admin and http://172.18.96.1/admin
 http://box/munin      Network/Infra monitoring
 http://box/awstats    Usage statistics

We could use help making several of these URL's more bulletproof across different networking environments! Please get in touch if you have Apache or NGINX expertise and can help here: #923

See: Can teachers display their own content?
See: Is a quick installation possible?
See: What services (IIAB apps) are suggested during installation?
See: Where can I see live demos of Internet-in-a-Box?
See: How do I customize my Internet-in-a-Box home page?
See: What are the default passwords?
See: How do I add ZIM files, like Wikipedia?

Can teachers display their own content?

Yes, teachers can spontaneously insert (and remove!) their own USB memory sticks and USB drives anytime. Somewhat like an informal projector, the teacher's content appears for students almost instantly at:

http://box/usb

Instructions:

  1. We recommend teachers use USB memory sticks/drives formatted with the FAT32 filesystem. Linux filesystems like ext4 can also work. Automount support for newer/larger exFAT-formatted sticks and NTFS-formatted portable disks was added in February 2018.
  2. Teachers insert their USB sticks/drives into any of the Internet-in-a-Box's USB ports, Done!
  3. This Teacher Content is available (live) to students within seconds. WARNING: Some browsers and non-standard phones/devices cannot access http://box/usb, and so require that students type in http://box.lan/usb or http://172.18.96.1/usb

Warnings:

  1. If you're using the Desktop (graphical) version of Raspberry Pi OS, please consider this workaround so that USB drives mount cleanly every after boot: #2456
  2. While generally not necessary (or realistic, for rural teachers etc, as mentioned on #2277) you can unmount drives by running: systemctl stop usbmount@dev-sda*
  3. USB memory sticks/drives may need to be removed and re-inserted into your Internet-in-a-Box before Teacher Content appears e.g. if stick was inserted just prior to a cold boot: #329
  4. Traditionally, the teacher needed to create a folder called "usb" on their USB memory stick, placing audio/video materials, handouts, challenges or presentation(s) inside that folder. However this "usb" folder is No Longer Required as of May 2018 / IIAB 6.5 (by default!) If however you prefer the old approach, edit your /etc/iiab/local_vars.yml so that it contains iiab_usb_lib_show_all: False and then run cd /opt/iiab/iiab; sudo ./runrole --reinstall usb_lib

CLARIFICATION: it's OK to insert multiple USB sticks/drives at the same time. If so, content from each USB stick/drive is visible within http://box/usb, e.g. in sub-folders that will be obvious, like the following:

http://box/USB0
http://box/USB1

Or possibly:

http://box/usb/USB0
http://box/usb/USB1

See the Install Doc. Finally, if you have a screen attached to your server, and occasionally see an error as follows, it is safe to ignore:

Unable to mount 2.0 GB Volume
Device /dev/sdb1 us already mounted at '/media/usb0'.

On many Linux OS's you can make this popup go away using File Manager > Edit > Preferences > click in left column -- Volume Management > Uncheck "Mount removable media automatically when they are inserted." #86

See: What can I do with E-books and Internet-in-a-Box?
See: How do I customize my Internet-in-a-Box home page?
See: How do I add ZIM files, like Wikipedia?
See: KA Lite Administration: What tips & tricks exist?
See: WordPress & Moodle Administration: What tips & tricks exist?
See: Can I permanently attach an external USB drive, to add more content?

Can I buy my own Internet-in-a-Box?

You can order a basic medical version of Internet-in-a-Box from the Wiki Project Med Foundation who will ship from Canada to almost any location worldwide, if you help provide feedback to improve the product for all.

A South Asia edition is also available in India.

See: Is a quick installation possible?
See: Where can I see live demos of Internet-in-a-Box?
See: How do I back up, shrink & copy IIAB microSD cards?
See: How can I donate to Internet-in-a-Box?

What hardware should I use?

Internet-in-a-Box (IIAB) is free and open source software that runs on many GNU/Linux platforms:

  • The Raspberry Pi 4 is best ($35 + parts) for classrooms or similar — we strongly recommend 2GB RAM or higher. The older Raspberry Pi 3 or 3 B+ ($35 + parts) are also possible, despite their 1GB RAM limitation. Finally the Raspberry Pi Zero W ($3.14-to-$10 + parts) can work well as a learning kiosk, despite its meager 512MB RAM (Internet-in-a-Box is used in rural medical clinics, and by families in their homes) noting that the microSD is typically provisioned with IIAB software and Content in an RPi 4 — and then later placed inside the RPi Zero W. (It continues to astonish us how powerful these tiny computers really are, the size of a cigarette lighter yet able to serve 32 students simultaneously, with their powerful built-in Wi-Fi!) RECAP: We strongly recommend the RPi 4 during production, for DIY implementers building their 1st digital library!
  • Refurbished "Windows" Laptops: Quality donated laptops can sometimes work extremely well to install Internet-in-a-Box, becoming a "Knowledge Hotspot" or server for an entire developing world classroom or small school. If the laptop's internal Wi-Fi works as an access point, this allows for a hassle-free self-contained unit, as is greatly preferred by most developing world schools (to control operational costs, spaghetti wiring, theft of router, etc). Conversely if the laptop's internal Wi-Fi cannot be used as an access point, an external Wi-Fi router can be made to work if truly necessary. In any case, make sure the laptop has a reasonably new battery, acting as a de facto UPS (critically important in developing world schools where electricity comes and goes). Naturally: laptops with large hard disks and multiple GB of memory are preferred — definitely check that the laptop runs Linux well, preferably with a BIOS that permits it to run while the screen is closed.
  • Intel NUC: Avoid classic/desktop PCs whenever possible, as they consume far too much electricity. However: tough, well-rounded, low-power Mini PCs (such as the Intel NUC) world extremely well, and have proven very effective as school servers in the developing world since 2014. We typically insist on NUC models that accept SATA (2.5 inch hard drives, HDD or SSD) and work with DC voltages up to 19V. WARNINGS:
    • The internal Wi-Fi in most Intel NUC computers is regrettably blocked from connecting to more than 12 Wi-Fi client devices. Compare this to the Raspberry Pi's mentioned above — whose internal Wi-Fi supports 32 simultaneous Wi-Fi client devices!
    • Low-end NUC models only work right near 12V, and so are not reliable using lead-acid batteries that you find in most solar installations. Read the spec carefully, for the exact model you're considering!
    • Finally: the NUC is not a fan-less device, but nevertheless has proved very reliable across diverse climates.
  • Other Mini PC competitors: MSI units have proven very solid, and Zotac perhaps less so. Definitely consider Gigabyte BRIX (e.g. GB-BSI3H-6100) which is almost an exact clone of the NUC. As a bonus, the BRIX allows internal Wi-Fi to scale beyond the Intel NUC's annoying limitation of 12 connections maximum. To make this happen, insert an appropriate Atheros Wi-Fi module (typically < $10) into the BRIX. George Hunt can answer questions around which Atheros Wi-Fi modules have been tested to work, as of February 2017. Recap: scaling up internal Wi-Fi is sadly not possible with Intel NUCs since 2015 (5th generation NUCs and onwards) as Intel's Wi-Fi module is unfortunately soldered in.
  • ARM Mini PCs: CPUs like TrimSlice / Utilite and Cubox by SolidRun might one day catch up, providing much-needed community momentum and packaging. To date however we have been disappointed with their firmware, and the availability of Linux kernels/drivers working with internal SATA / internal Wi-Fi (e.g. AP mode), to truly make teachers' lives easier. But check back as many more global deployments' experiences accumulate, and rugged low-end hardware increasingly emerges, on OrangePi or similar?
  • One Laptop Per Child: We do NOT recommend the original XO-1 laptop as a server (256MB RAM is insufficient). However several have successfully deployed the very rugged XO-1.5, XO-1.75 (ARM) and XO-4 (ARM) as school servers in Haiti and Malaysia etc. Thanks to George Hunt's amazing work here over the years.

MEMORY: Some do fine with 512MB RAM (even in 2018!) serving static content from the RPi Zero W. Others do just fine serving dozens of simultaneous video streams from an RPi3 (or 3 B+) with 1GB RAM. Finally, certain others require 2GB or 4GB from an RPi 4 — or 8GB or more within a Mini PC — when server-side loads become very intensive. For example if you are running an LMS, experiencing a lot of OpenStreetMap traffic, running a Wikipedia Treasure Hunt with multiple students running full-text searches of Wikipedia — or offering streaming & fileserver-like capabilities broadly to many students.

STORAGE: While there's increasing movement from hard disks to SSDs and MicroSDs every year, many others still swear by tried-and-true hard drives. Certainly rotating media are the clear winner when TB (or multi-terabyte) storage is needed at a low price. In the end all storage technologies can fail, each in there own ways. So it's far more more important to start with the actual community's learning goals, engaging educators around their authentic content/interaction needs — and then narrow in on storage capacity/technologies later. Alternative: consider this earlier discussion of external USB hard disks and their possible risks.

HEAT/DIRT/DUST: Ensure your server is positioned with ample room around it for ventilation, away from direct sunlight. Dirt/dust will collect inside it almost regardless, and should certainly be removed from time to time.

Thank you for asking further hardware questions at http://lists.laptop.org/listinfo/server-devel !

See: What OS should I use?
See: Is a quick installation possible?
See: Can I create a Wi-Fi hotspot using an old laptop?
See: Can I install IIAB onto a USB drive?

What OS should I use?

Our latest OS (Linux distribution) recommendations should always be posted in the IIAB Platforms document.

Generally the 32-bit Raspberry Pi OS on Raspberry Pi 4 is best for people getting their feet wet, regardless if you prefer the full/graphical Raspberry Pi OS "with desktop" (includes many amazing desktop apps for learning, with the LXDE-pi desktop/windowing system) — or, you might prefer Raspberry Pi OS "Lite" (which does not include a graphical desktop environment) for a more classic/headless server. WARNING: NOOBS IS NOT SUPPORTED, as its partitioning is very different!

As of December 2020, these newly available 64-bit OS's can also be considered on Raspberry Pi hardware:

On PC-like hardware, we recommend 64-bit LTS OS's with multi-year support, like:

Others like Reno McKenzie & Josh Dennis experimented successfully (tweaks required!) with IIAB on the lean & mean http://DietPi.com back in 2017. Similarly Ubermix 4.1 was successfully tested in 2019.

Finally, if there are situations where porting to a new OS/distro will tangibly help schools/libraries/clinics across an entire region, don't hesitate to reach out (on our server-devel mailing list, or contact holt @ unleashkids.org) as you assess the scope-of-work to complete such a job.

See: What hardware should I use?
See: Is a quick installation possible?
See: What are the best places for community support?

Is a quick installation possible?

If you're Ok with an Internet-in-a-Box that might be older, you can download a prefab image for your Raspberry Pi microSD card here.

Otherwise we recommend the very latest, first verifying that your hardware and Linux OS are appropriate:

  • If you're using a Raspberry Pi 4 (or the older 3 or 3 B+) install the official Raspberry Pi OS (do NOT use NOOBS!)
  • If you're using a PC/Laptop or VM, install a minimal OS like Ubuntu 20.04, Debian 10 or Linux Mint 20.

Then run the 1-line installer to install an Internet-in-a-Box (IIAB) 7.2 pre-release, by typing in:

  curl d.iiab.io/install.txt | sudo bash

This can take an hour or more to complete — depending whether you choose MIN-sized (~6 server apps), MEDIUM-sized (~12 server apps) or BIG-sized (~20 server apps) as the installer begins. Use our comparison table below, to decide which is most suitable for your needs.

An Ethernet cable (connected to fast, live Internet) is strongly recommended during installation, as well as a modern microSD card (with fast write speeds), and a well-ventilated Raspberry Pi! While a lot has changed since 2019, we still encourage you to watch the "ZERO to IIAB" installation video on our YouTube channel to get familiar with important offline learning ideas.

Remember: IIAB's 1-line installer might need you to run sudo iiab multiple times, before IIAB's software install fully completes — e.g. if Internet connectivity is interrupted for any reason. When that's done and your IIAB software install is 100% complete, you'll be asked to reboot — typically within about-an-hour-or-so. (Such that you can begin installing content!)

Linux hackers please note that other Linux OS's might be possible, but can require extensive babysitting to get right, so consider the long-form "Do Everything from Scratch" install instructions if porting IIAB to a new Linux distribution is your goal. Noting that when booting your PC, traditional MBR is preferred, but UEFI can also work (as set in your PC/server's BIOS) if your Linux distribution supports that.

Beware that partitioning is critical particularly with distros like CentOS that attempt to allocate all extra/surplus space to /home by default (this won't work, as gigabytes of content need to be placed in /library instead!) Avoid enabling LVM partitioning, especially if you'll later be needing Clonezilla to duplicate the disk.

Finally, If you get completely stuck, capture a screenshot (take a photo if copying & pasting is not possible) then get in touch so volunteers can help you work it out.

Once the IIAB software is installed, it's time to add content to your Internet-in-a-Box (IIAB) server, as outlined below, tailoring it to your community/library or clinic's precise needs!

See: Can I buy my own Internet-in-a-Box?
See: What hardware should I use?
See: What OS should I use?
See: What technical documentation exists?
See: What are the default passwords?
See: How do I customize my Internet-in-a-Box home page?
See: Can I create a Wi-Fi hotspot using an old laptop?
See: How do I back up, shrink & copy IIAB microSD cards?
See: What are the best places for community support?
See: Can I install IIAB onto a USB drive?

What services (IIAB apps) are suggested during installation?

When installing Internet-in-a-Box (IIAB) using http://d.iiab.io/install.txt, you're given a choice of MIN-sized, MEDIUM-sized or BIG-sized — to get you started fast!

Which services (IIAB apps) are included in each of these 3? This summary table helps you choose among these ~30 educational apps, including several famous LMS's (Learning Management Systems).

Then, after choosing among these 3 sizes, IIAB's installer encourages you to further refine your choice (of IIAB apps, optionally, if you so choose) by customizing your very own /etc/iiab/local_vars.yml

MIN MED BIG IIAB APP URL DOCS DESCRIPTION
X X X box/awstats AWStats AWStats is an open source Web analytics reporting tool, suitable for analyzing data from Internet services such as web, streaming media, mail, and FTP servers. AWStats parses and analyzes server log files, producing HTML reports.
X X X box:8008 KA Lite Offline version of Khan Academy including thousands of videos and quizzes. Very popular in high schools. Supports English, Spanish, Portuguese, French, Hindi, Swahili. Kolibri (below) might replace KA Lite in future.
X X X box/kiwix Kiwix Kiwix is a free and open-source offline web engine created by Emmanuel Engelhart and Renaud Gaudin in 2007.
X X X box/maps OpenStreetMap OpenStreetMap is like Google Maps but better, for schools especially, as it works offline and avoids all the advertising. Download detailed "vector maps" for an entire continent, or the entire world! Also includes 10+ zoom levels of satellite imagery!
X X X box/usb USB_LIB Content from USB sticks/drives, that teachers can insert anytime.
I I I (none) Bluetooth Bluetooth access to IIAB's Admin Console, for IIAB field operators/administrators and advanced teachers too. Provides two services, pan (or Personal Area Network) and term (terminal emulation) — installed (I) but not enabled. Works on Raspberry Pi only.
I I I (none) Captive Portal Captive Portal attempts to help people who get frustrated typing in http://box.lan onto their phone, tablet or laptop — attempting to open their browser for them, to display Internet-in-a-Box automatically — installed (I) but not enabled. #1182
I I I (none) OpenVPN OpenVPN allows for remote administration (e.g. using ssh) of your Internet-in-a-Box server (IIAB) and remote diagnostics with the IIAB development community / team — installed (I) but not enabled.
X X box/books box/libros box/livres Calibre-Web Calibre-Web is a web app providing a clean interface for browsing, reading and downloading E-books using an existing Calibre database.
X X box/nextcloud Nextcloud Nextcloud puts your data at your fingertips, under your control. Store your documents, calendar, contacts and photos on your local server.
X X box/sugarizer Sugarizer A taste of Sugar on any device, used every day by children around the world connected with the One Laptop per Child project. Does not run on Debian 10, due to MongoDB requirement: #1437
X X box:9091 Transmission Transmission is a BitTorrent client (software) that helps you auto-download KA Lite (Khan Academy) videos and similar.
X X box/wordpress WordPress WordPress is most associated with blogging (personal journaling) but supports other types of web content including more traditional mailing lists and forums, media galleries, and diverse plugins.
X box:631 CUPS CUPS is a modular printing system for Unix-like computer operating systems which allows a computer to act as a print server.
X box/elgg Elgg Elgg is a social networking engine used by offline schools to create a collaborative environment. Includes basic blogging, microblogging, file sharing, networking and groups.
X box/gitea Gitea Gitea is a lightweight self-hosted Git service similar to GitHub.com, and written in Go.
X box:4244 or box/archive ? Internet Archive The Internet Archive is famous for their Wayback Machine that keeps a copy of 400+ Billion web pages. Their Decentralized Web allows you to create an offline digital library as part of your IIAB, arising from https://dweb.archive.org
X box/kolibri Kolibri Kolibri (might replace KA Lite in future!) provides offline access to a wide range of quality, openly licensed educational content. Supports Kolibri Studio so online teachers can quickly remix & redistribute innovative lesson plans.
X box/lokole Lokole Lokole is an Email service that works offline for rural communities, students and teachers. With a 3G/4G modem, you can arrange to batch-upload / batch-download emails once per night — for almost no cost at all — depending on mobile data plans in your country.
X box/wiki <- box/mediawiki MediaWiki MediaWiki is the software that makes Wikipedia possible. It allows students to create community web pages together, with attached images, and includes excellent international language support.
X (none) Minetest Minetest is a Minecraft-inspired creative/explorational building blocks game. Supports both survival and creative modes along with multiplayer support, dynamic lighting, and an "infinite" map generator. You can customize it with different games/engines and mods.
X box/moodle Moodle Moodle is a learning platform designed to provide educators, administrators and learners with a single robust, secure and integrated system to create personalised learning environments. SLOW INSTALL
X (none) Mosquitto Mosquitto (uses the MQTT protocol) is a pub-sub broker for electronics projects and educational Internet of Things (IoT) experiments. It's designed for TCP/IP with remote locations where a "small code footprint" is required or bandwidth is limited. See also: Node-RED
X box/munin Munin Munin graphs help monitor infra like CPU, disk and especially networking. Munin can help analyze resource trends and "what just happened to kill our performance?" problems.
X box/nodered Node-RED Node-RED enables electronics projects with a flow-based development tool for visual programming, originally developed by IBM for wiring together hardware devices, APIs and online services as part of the Internet of Things (IoT). "Low-code programming for event-driven applications." See also: Mosquitto
X (none) vnStat vnStat command is a console-based network traffic monitor. It keeps a log of hourly, daily and monthly network traffic for the selected interface but is not a packet sniffer.
I box/phpmyadmin ? phpMyAdmin phpMyAdmin is a free and open source administration tool for MySQL and MariaDB — installed (I) but not enabled in BIG.
I (none) Samba Samba is the standard Windows interoperability suite of programs for Linux and Unix — installed (I) but not enabled in BIG.
box:10080 AzuraCast AzuraCast is a self-hosted, all-in-one radio station platform. Use AzuraCast to schedule podcasts, music, and even do live streaming of audio content. A variety of streaming formats are supported. Requires Ubuntu or Debian for now. PR #1733
box:8080 Calibre Calibre E-Book Library can be a one-stop solution for all your e-book needs. Many prefer to use Calibre-Web (above) which adds a friendlier / more modern design, to the same back-end structure. SLOW INSTALL
box/stream box:8081 Cham Cham is an experimental/lightweight live video streaming platform with adaptive bitrates for IIAB. PR #1743
box/dokuwiki (deprecated, Jan 2020) DokuWiki DokuWiki is a wiki application licensed under GPLv2 and written in the PHP programming language. It works on plain text files and thus does not need a database.
(none) ejabberd ejabberd is a free and open source instant messaging server.
box:2812 ? Monit Monit is a process supervision tool. With Monit, system status can be viewed directly from the command line, or via the native HTTP web server. Does not run on Debian 10: #1849
box:83 PBX Full-featured PBX for rural telephony etc, that can integrate with GSM (mobile phone) networks. Based on Asterisk (Voice over IP, SIP telephone numbers) and FreePBX (web-based GUI to administer it). SLOW INSTALL
(none) Squid Squid is a proxy server that can be helpful for caching and bandwidth shaping, but can be challenging to configure.

See: What can I do with E-books and Internet-in-a-Box?
See: Is a quick installation possible?
See: How do I customize my Internet-in-a-Box home page?
See: What is local_vars.yml and how do I customize it?
See: Can I upgrade or reinstall server apps?

What technical documentation exists?

Please look over our growing collection of HOW-TO videos. See also our Tech Skills Videos (alternate view) focusing on networking, Raspberry Pi, web basics, and security — with sub-titles in English, Spanish and French.

IIAB Tech Docs explain the infrastructure that makes Internet-in-a-Box possible.

Living Docs are ever-evolving as technical progress is rapid, so please also search this very document (FAQ.IIAB.IO) and consider monitoring the very latest GitHub code merges too.

Developers can also consider our IIAB Contributors Guide, first published in October 2017.

Offline operators should check our growing collection of Internet-in-a-Box technical support docs (and eventually videos!) being made available at http://box/info.

Some remote operators prefer to download the very latest tech support documentation every few months when their server is briefly online, by running "/usr/bin/iiab-refresh-wiki-docs" which is equivalent to /opt/iiab/iiab/roles/www_base/templates/refresh-wiki-docs.sh (based on the pandoc document converter).


Documentation for Older Versions of IIAB:

Core IIAB/XSCE 6.2 Docs were migrated to https://github.com/xsce/xsce/wiki for IIAB/XSCE 6.2 in early 2017, and then to https://github.com/iiab/iiab/wiki in June 2017 for IIAB 6.3.

The earlier XSCE 5.1 + Internet-in-a-Box Install Doc for Intel NUC from 2015 can sometimes be very useful for larger hardware implementers.

Also see George Hunt's foundational collection of XSCE (School Server Community Edition) docs from 2012-2015 at http://schoolserver.wordpress.com

Finally, Anish Mangal hopes to formally write up his deployment recommendations / 8-part training materials based on his experiences setting up IIAB/XSCE in Northern India, while http://unleashkids.org with http://kidsoncomputers.org document the human experience around Haiti/Mexico deployments and beyond.

Please suggest improvements to this FAQ where you can, and check back to reread at a later date, Thank You!

See: What security tips exist?
See: How can I remotely manage my Internet-in-a-Box?
See: What are the best places for community support?
See: How can I help?

What is Ansible and what version should I use?

Ansible is software that orchestrates the installation of Internet-in-a-Box (IIAB) and its component apps/services.

Read the latest version/installation recommendations near Line 8 of scripts/ansible (ansible-base 2.10.3+ is recommended as of 2020-11-05, but note this recommendation is upgraded frequently as Ansible evolves!)

You may need to upgrade Ansible, particularly if you're updating an older version of IIAB.

If so, be sure you're online, then follow these Raspberry Pi OS/Ubuntu/Debian/Mint instructions as root or using sudo:

  1. Run "ansible --version" to see what version of Ansible you might already have installed — make sure you don't have an old/troublesome version of Ansible installed!
  2. Remove all prior versions of Ansible using "apt purge ansible-base" (and/or "apt purge ansible" and/or "pip uninstall ansible-base" and/or "pip uninstall ansible") depending how Ansible was originally installed — if necessary see #564
  3. Remove any and all lines containing "ansible" from /etc/apt/sources.list and the files in /etc/apt/sources.list.d/
  4. Run the above-mentioned script, by typing "cd /opt/iiab/iiab" then "scripts/ansible"
  5. Run "ansible --version" and/or "apt -a list ansible-base" to verify (on rare occasions you might first need to log out and log back in, if Ansible ends up being moved e.g. from /usr/local/bin to /usr/bin or vice versa)

CLARIF: None of the above should be required if you're doing a fresh install on a clean OS, using the 1-liner IIAB installer from: http://download.iiab.io (which installs Ansible for you!)

PRO TIP: For those wanting to run a single Ansible playbook or role, run ./runrole <ROLE NAME> (prior to Ansible 2.5 arriving in March 2018, this was known as ./runtags).

PRO TIP: Read https://github.com/iiab/iiab/wiki/IIAB-Contributors-Guide#ansible to learn more about how IIAB uses Ansible.

PRO TIP: IIAB's Ansible script attempts to upgrade Ansible Collections as well. See those ~3 lines near the bottom of the script, that each begin with: ansible-galaxy collection install --force-with-deps

PRO TIP: For more of the nitty-gritty of how IIAB installs the most recent Ansible and associated python3-* apt packages, see: https://github.com/iiab/iiab/blob/master/scripts/ansible.md

See: Is a quick installation possible?
See: What technical documentation exists?

My Android device says "Connected, no Internet" and won't browse http://box

  1. The message "Connected, no Internet" is perfectly normal (in an offline environment). Just beware Android may block you from using Wi-Fi to access Internet-in-a-Box content (preventing your browser from displaying http://box) unless you follow these instructions:
    1. Connect your Android device to the correct Wi-Fi for Internet-in-a-Box.
    2. Recent versions of Android will generally beep within about 1 minute, announcing "Wi-Fi has no Internet access" and "Tap for options".
    3. Tap for more options (you may need to use your finger to find this notification first, pulling it down from the top of your Android screen).
    4. When it asks "This network has no Internet access. Stay connected?" be sure to tap "Yes" !
    5. If you were unable to tap in time, and http://box is still not working in your browser, try to "Forget network" (within Android's Settings -> Wi-Fi networks) then start over, proceeding from Step 1. above.
  2. Samsung and Huawei smartphones generally require to you to Turn Off "Mobile Data" before you can browse to http://box, http://box.lan or http://172.18.96.1

See: Captive Portal Administration: What tips & tricks exist?

What are the default passwords?

For KA Lite, Kolibri, Calibre, Calibre-Web, Nextcloud, Moodle, Elgg, Transmission, etc the administrative user is Admin (don't forget the capital A) and the default/initial password is: changeme — WordPress as well, often uses this same account. For MediaWiki however, Admin/changeme2020 is the initial username/password.

An example is Calibre-Web's "teacher" account (Admin/changeme) which can add/remove and convert E-Books, and also change their metadata, at http://box/books. Whereas Calibre itself (if installed, typically at http://box:8080) uses these 7 "student" accounts, to read or download E-Books: box/box, h/h, ht/ht, m/m, mx/mx, p/p or pe/pe (as of Internet-in-a-Box 7.0). If you have access to the Linux command-line, you can change Calibre's accounts by running: calibre-server --manage-users --userdb /library/calibre/users.sqlite

However for IIAB's own Admin Console[*] at http://box/admin, http://box.lan/admin or http://172.18.96.1/admin, the username is iiab-admin and the default/initial password is: g0adm1n (note the numbers 0, 1). GNU/Linux administrators can also use this to login over ssh.

Change iiab-admin's password before connecting your server to the Internet. You can do this within http://box.lan/admin -> Utilities menu — or at the command line, if you type "passwd iiab-admin".

If your OS is Raspberry Pi OS: also change the password for user "pi" from "raspberry" before connecting to the Internet. At the command line, type "passwd pi". Starting with IIAB/XSCE 6.2's standardized images (as of April 2017) we removed the passwords for user "root" (and where possible for user "pi" too, within headless images), by setting their password fields to * (the asterisk character) within /etc/shadow. This prevents direct ssh access to such accounts.

Still, both users "iiab-admin" and "pi" (if they exist) have root (sudoer) powers. As such, advanced operators generally log in as iiab-admin and then escalate to root using "sudo su -".

[*] While the Admin Console can change iiab-admin's password instantly, it's important to understand that many Admin Console changes (within its Configure menu especially) require you click "Save Configuration" then "Install Configured Options" and then wait for this to complete. Monitor for Status "SUCCEEDED" under Utilities menu -> Display Job Status (takes about 20 min on a Raspberry Pi 3, 3 B+ or 4, depending what changes you've requested!)

Finally, certain install-time passwords are listed in /etc/iiab/local_vars.yml which overrides passwords listed in default_vars.yml. If you change any of these install-time passwords (by modifying local_vars.yml) don't forget to then run Ansible, e.g. using "Install Configured Options" above! 2020-09-23 Warning: MySQL/MariaDB passwords cannot easily be changed after IIAB install (#2542).

Admin Console: Please note that "systemctl restart iiab-cmdsrv.service" is sometimes necessary when http://box.lan/admin shows red errors upon login.

Warning: KA Lite's Admin password cannot be changed in a browser (http://box:8008 can only change KA Lite's user passwords) so you need to run "kalite manage changepassword Admin". Help is available if you type "kalite manage help changepassword".

See: What can I do with E-books and Internet-in-a-Box?
See: What technical documentation exists?
See: What is local_vars.yml and how do I customize it?
See: What security tips exist?
See: How can I remotely manage my Internet-in-a-Box?
See: KA Lite Administration: What tips & tricks exist?
See: What are the best places for community support?

Where can I see live demos of Internet-in-a-Box?

Please see these live demo examples as used by medical clinics in 2018, hosted by the Wikimedia Foundation (Wikipedia).

Many more examples from schools in Jamaica, Mexico, and other places around the world, will be posted. Here is a South Asia Medical Version including more than 30 languages. Please contact us if you:

  1. Want to see diverse snapshots firsthand, to inform your own Internet-in-a-Box design?
  2. Have community examples that should be showcased right here, to assist others?

See: Can I buy my own Internet-in-a-Box?
See: Is a quick installation possible?
See: How do I customize my Internet-in-a-Box home page?

How do I customize my Internet-in-a-Box home page?

Please watch the videos on Internet-in-a-Box's YouTube channel (several available as .mp4 and .webm) to get moving downloading and arranging content on your Internet-in-a-Box (IIAB).

Your IIAB home page is usually reachable at http://box, http://box.lan or http://172.18.96.1 from any nearby smartphone, tablet or laptop/computer.

You can build a beautiful IIAB home page for your community by following these steps:

  1. Add content to your IIAB, by downloading the Content Packs you need using the Admin Console (http://box/admin or http://box.lan/admin) with default password above:
    1. Click the Install Content tab, then explore Get ZIM Files from Kiwix and Get OER2Go(RACHEL) Modules on the left.
    2. If instead you want to load content from a USB drive, click Manage Content on the left.
    3. Multi-gigabyte Content Packs can take hours to download, unpack & install! Consider limiting yourself to 10-or-fewer Content Packs at a time, to avoid thrashing! Monitor the progress under Utilities tab -> Display Job Status — until all are marked as "SUCCEEDED" in the Status column.
  2. Rearrange / re-order your menu items (the Content Packs and IIAB Apps on your IIAB home page) including those that were added just above:
    1. Easy Way - use the drag-and-drop interface within Admin Console (http://box.lan/admin) -> Content Menus tab -> Edit Content Menus -> Content Item List. You may need the "Load Menu", "Save Menu" and "Select Languages" buttons.
    2. Or Manually - rearrange the order of menu items by editing the menu_items_1 array in /library/www/html/home/menu.json.
  3. If you need to change the description or logo for any particular menu item:
    1. Change its description by editing the menu item's .json and/or .html files within /library/www/html/js-menu/menu-files/menu-defs (e.g. to change the description of Practical Action, edit en-practical_action.json and/or en-practical_action.html).
    2. Change its logo by placing a new logo file in /library/www/html/js-menu/menu-files/images, making sure that logo_url is set to the correct logo filename (in its above-mentioned .json file).
  4. Finally, to showcase your school logo or community colors broadly on your Internet-in-a-Box home page, you can customize /library/www/html/home/index.html and the CSS files in /library/www/html/js-menu/menu-files/css. WARNING: editing the index.html page and css files can easily have unintended consequences. For this type of customization, you should consider using WordPress (summarized just below).

Notice: clearing the browser's cache (e.g. Ctrl-Shift-Delete) is sometimes necessary after making any of the above changes!

If you get completely stuck, capture a screenshot (take a photo if copying & pasting is not possible) then get in touch so volunteers can help you work it out.

How This All Works: Dynamic Menuing was originally introduced by IIAB/XSCE 6.1, to reduce front-end hand-coding of HTML, by auto-adjusting all http://SERVERNAMES:PORTS links on-the-fly (using browser-side Javascript). More advanced usages are also now possible, if you read about Menu Item Definitions and HTML Fragments — taking note of the latest 2019 additions.

Alternatives: Some prefer a completely different front-end for their Internet-in-a-Box home page, e.g. WordPress (with this possible IIAB plugin), or DokuWiki, or even Moodle etc. Several of these can be enabled in your IIAB's Admin Console (http://box/admin or http://box.lan/admin) -> Configure tab -> Server Portal -> Select Server Home Page — where your choices include:

  • /home
  • /wordpress
  • /wiki

If you do this, don't forget to enable "Check to Enable WordPress" or "Check to Enable DokuWiki" at the top of that page — then on the left click "Save Configuration", followed by Install Configured Options — finally monitoring the result (typically takes 15-25min on a Raspberry Pi 3, 3 B+ or 4) under the Utilities tab -> Display Job Status.

See: What can I do with E-books and Internet-in-a-Box?
See: Can teachers display their own content?
See: Is a quick installation possible?
See: What services (IIAB apps) are suggested during installation?
See: What are the default passwords?
See: Where can I see live demos of Internet-in-a-Box?
See: How do I change to Mobile view or Desktop view?
See: How do I add ZIM files, like Wikipedia?
See: KA Lite Administration: What tips & tricks exist?
See: WordPress & Moodle Administration: What tips & tricks exist?
See: Can I permanently attach an external USB drive, to add more content?
See: How do I back up, shrink & copy IIAB microSD cards?

How do I change to Mobile view or Desktop view?

Starting with Internet-in-a-Box 7.0 (#1775) IIAB includes a Mobile/Desktop button, but it's a bit hard to find, so here are basic instructions:

  1. Look in the top-left corner of your IIAB home page (e.g. http://box or http://box.lan)
  2. Click on the 3 dots (vertical ellipsis)
  3. A white popup/dropdown menu will appear
  4. Click on its middle icon (which looks like 2 squares, one square on top of the other) to toggle your current browser view between Mobile view and Desktop view!

Notes:

  • You can permanently change visual aspects of IIAB's Mobile view and Desktop view within http://box.lan/admin > Content Menus > Properties of Current Menu > [check or uncheck any of the 4 + 4 checkboxes for Description, Extra Description, Sub-menu and Footnote] > Save Menu.
  • Separately, many mobile browsers have their own button to force Desktop view — typically found in the top-right under the browser's own vertical ellipsis. Look there for the "Desktop site [ ]" checkbox in Chrome, or the "Request desktop site [ ]" checkbox in Firefox.

See: How do I customize my Internet-in-a-Box home page?

How do I provide Solar Power to my school, library, clinic or orphanage?

This is a very hard question depending on the growth path of your electrical needs, local supply chains, electricians' norms within the country in question — and of course maintenance, price, theft patterns, etc.

In places like Haiti this typically revolves around a bank of 12-volt deep-cycle batteries like the Trojan T-105. But don't hesitate to get your feet wet researching and designing a right-sized solar nanogrid suitable for your own community.

In 2019, please see this India solar discussion: eka-foundation/home#24

Tips from earlier years can also still be useful:

Thanks for taking solar engineering seriously — engineers especially should subscribe to Richard Smith's "power" discussion list if you can!

How do I provide Wi-Fi (wireless) to all my kids?

If you want a self-contained (single-unit) knowledge hotspot, consider Wi-Fi capability physically inside your server (despite its limited radio power?) If so, run "iw list" to determine if it is capable of Access Point (AP) mode, enabled by hostapd. Of course you may need to run "apt install iw" or "yum install iw" first, so the iw command is available on your server.

If you want higher-powered Wi-Fi equipment and antenna(e) fully external to the server itself, consider approaches from http://villagetelco.org where possible, detailed below. More experimentally, Anish Mangal has experimented successfully with cantenna(e) in India, between classrooms and schools.

Within classrooms, many deployments use the $20 TP-LINK TL-WR841N as these Wi-Fi Routers have proved generally reliable over the years.

We recommend deployments double the classroom capacity of these WR841 routers (to almost 40 simultaneous connections) by trying Terry Gillett's SECN-XSCE firmware here: (based on OpenWrt, but far simpler)

 http://download.villagetelco.org/firmware/secn/unstable/tp-link/SECN-4/XSCE/

April 2016's RC3 firmware release is increasingly stable: strongly consider it or more recent. It should be followed shortly by a stable/official release we hope. There is firmware for all recent versions of WR841 hardware (v8, v9, v10 and v11) so be sure to select the correct one.

When flashing a TP-LINK with original factory firmware, install using a firmware file labelled "factory" from the RC1 or RC2 folders. Otherwise, use a firmware file labelled "sysupgrade" to upgrade from one OpenWrt-based version to another.

There is also a wiki page outlining how to use PoE (Power over Ethernet) and how to daisy-chain multiple such routers together:

 http://wiki.villagetelco.org/Power_over_Ethernet_for_MP02_and_TP-Link_Routers

Most important: take advantage of community support, where volunteers are eager to help on the server-devel@lists.laptop.org and xsce-devel@googlegroups.com mailing lists. There's always tons to learn from the latest Wi-Fi fieldwork success stories.

Also consider IRC channel #schoolserver on http://webchat.freednode.net for live chat, and unleashkids@googlegroups.com, which is a great place to ask educators about various schools' filtering recommendations, across different age groups and cultures, whether your school is online or off!

Finally, don't hesitate to blog or write up your own specific recommendations, no matter how large or small your school. This vital engineering shop-talk upholds more schools, libraries and orphanages than we can count (building our community repertoire of Wi-Fi wisdom, often far from the Internet, creating "knowledge hotspots" in every sense) in turn allowing kids to take advantage of amazing free Digital Libraries like http://internet-in-a-box.org and Pathagar e-books.

See: Can I create a Wi-Fi hotspot using an old laptop?
See: Any other networking tips?

Can I create a Wi-Fi hotspot using an old laptop?

Yes, it is possible to create a Wi-Fi hotspot (using hostapd) on some laptops and netbooks, e.g. those with Qualcomm Atheros chipsets. Older Atheros chipsets have good support in GNU/Linux (https://wiki.debian.org/ath9k).

February 2019 Testing Confirms: IIAB 6.7's hostapd Wi-Fi hotspot works with the Qualcomm Atheros AR9285 PCI-Express Wireless device found in an Acer Aspire One.

See: What hardware should I use?
See: Any other networking tips?

How do I change the wireless network name?

The wireless network name (also known as SSID) is what most people use to connect to Internet-in-a-Box using their Wi-Fi devices.

How to rename it depends on whether your wireless access point is fully-external (such as a wireless router) or rather under direct OS control (e.g. internal, or a tiny USB-connected wireless adapter) :

  • If it's fully-external, change its SSID (wireless name) using the documentation that came with the Wi-Fi router.
  • If it's under direct OS control, then the Internet-in-a-Box (IIAB) is also the wireless access point:
    • Edit this line in /etc/iiab/local_vars.yml :
      host_ssid: "Internet in a Box" (quotation marks are OPTIONAL)
      Then run as root: (or sudo)
      cd /opt/iiab/iiab && ./iiab-network
    • You might also log into your server's Admin Console (http://box/admin or http://box.lan/admin) then change the SSID (wireless name) there, under Configure -> Internal Wi-Fi AP -> Internal Wi-Fi Access Point Name. This setting will not take effect until you click on Configure menu -> Install Configured Options (red button), and wait many minutes for all new settings to take effect (monitor status under Utilities menu -> Display Job Status).
    • WARNING: do not edit /etc/hostapd/hostapd.conf directly, unless you want these custom settings trashed upon updating your Internet-in-a-Box! If you must edit this file despite the danger, consider "systemctl restart hostapd.service" to avoid rebooting.
    • Finally you can run iiab-hotspot-on and iiab-hotspot-off which are found in /usr/bin — these are especially useful after you've used a Raspberry Pi's internal Wi-Fi to download IIAB and content. Earlier: George Hunt's command "xs-hotspot-on <SSID>" likewise turned on the internal hotspot for XO-1.5 laptops. Conversely, "xs-hotspot-off" turned that off.

See: What are the default passwords?
See: Any other networking tips?
See: What is local_vars.yml and how do I customize it?

Can I name my server something other than http://BOX.LAN ?

http://box.lan should work in ~99% of all cases, and http://box should work in ~90% of cases; there is no need to change these.

If however a custom name is strongly desired, this can be implemented within each school/library/clinic by editing /etc/iiab/local_vars.yml — and then run "cd /opt/iiab/iiab" followed by "./iiab-network"

Or: log into Admin Console (http://box/admin or http://box.lan/admin) -> Configure menu -> Network Parameters -> Host Name, if you click "Save Configuration" then "Install Configured Options" (waiting patiently for that to complete under Utilities menu -> Display Job Status; which takes ~20min on a Raspberry Pi 3, 3 B+ or 4!)

Many different names have been used in the past, such as http://schoolserver.lan and http://school.lan -- anything that resolves locally to http://172.18.96.1 should be sufficient with standard networking. For the record, some of these older names are listed within the following links:

https://github.com/iiab/iiab/blob/master/roles/network/templates/named/school.external.zone.db
https://github.com/iiab/iiab/blob/master/roles/network/templates/named/school.internal.zone.db
https://github.com/iiab/iiab/blob/master/roles/network/templates/named/school.local.zone.db

Advanced implementers may want to change these 4 zone files too, all within the very same /var/named-xs directory:

school.internal.zone.16.in-addr.db
school.internal.zone.32.in-addr.db
school.internal.zone.48.in-addr.db
school.internal.zone.in-addr.db

See: What are the default passwords?
See: Any other networking tips?
See: What is local_vars.yml and how do I customize it?

How do I set a static IP address?

To set a static (fixed) IP address such as 192.168.1.99, use lines like the following in /etc/iiab/local_vars.yml and then run the './iiab-network' command (or './runrole network') in /opt/iiab/iiab :

 wan_ip: 192.168.1.99
 wan_netmask: 255.255.255.0
 wan_gateway: 192.168.1.254
 wan_nameserver: 192.168.1.254
 wan_try_dhcp_before_static_ip: True

By default this is a FALLBACK static (fixed) IP address, which requires an Ethernet cable and link-light showing. If that cable connects IIAB to an Internet router/cablemodem or similar (that is turned on) IIAB should receive a DHCP IP address within about 30 seconds. Or, if there is no DHCP on the wire, IIAB will set its own IP address (typically on eth0) to 192.168.1.99 per this example, about 45 seconds later.

Specifically, if you keep wan_try_dhcp_before_static_ip: True your /etc/dhcpcd.conf will contain: (on Raspberry Pi OS)

 profile static_eth0
 static ip_address=192.168.1.99/24
 static routers=192.168.1.254
 static domain_name_servers=192.168.1.254
 
 interface eth0
 fallback static_eth0

Or if you set wan_try_dhcp_before_static_ip: False your /etc/dhcpcd.conf will contain: (on Raspberry Pi OS)

 interface eth0
 static ip_address=192.168.1.99/24
 static routers=192.168.1.254
 static domain_name_servers=192.168.1.254

IN GENERAL, you may need to unplug your IIAB's Ethernet cable and plug it back in before a static IP address takes effect! As such, hard-core traditionalists might also want to add the following to /etc/network/interfaces.d/iiab, to force a static IP address even before the Ethernet "carrier" (i.e. link light) is detected:

 auto eth0
 iface eth0 inet static
     address 192.168.1.99
     broadcast 192.168.1.255
     netmask 255.255.255.0
     gateway 192.168.1.254
     dns-nameservers 192.168.1.254

FYI the above 7 lines also work when nothing at all is added to /etc/dhcpcd.conf, if you want an alternative approach in support of intermittent online updates of your IIAB via Ethernet cable to cablemodem etc (careful though, this unsupported approach is risky as your eth0 will often have 2 IP addresses!)

WHEREAS on Ubuntu 18.04, the wan_try_dhcp_before_static_ip variable is currently ignored (i.e. treated as False) and netplan stores your static IP address settings from /etc/iiab/local_vars.yml into /etc/netplan/01-iiab-config.yaml as follows:

 network:
   version: 2
   renderer: networkd
   ethernets:
     enp0s3:
       addresses:
       - 192.168.1.99/24
       gateway4: 192.168.1.254
       nameservers:
         addresses: [192.168.1.254]
         search: [lan]

Debian 10's equivalent to be clarified in future, after its 2019-07-06 release (please help us here if you can!)

FINALLY, if IIAB is already installed, also consider IIAB's Admin Console (http://box/admin or http://box.lan/admin) -> Configure tab -> Network Parameters -> Check to use a static WAN IP Address instead of DHCP -> (enter your) Static WAN IP Address -> Save Configuration -> Install Configured Options.

See: What are the default passwords?
See: Any other networking tips?
See: What is local_vars.yml and how do I customize it?

Any other networking tips?

Please look over:

  • The network README outlines the 'network' Ansible role (Ansible playbook) that runs towards the end of IIAB's installation, after all other IIAB apps/services have been installed. You should run it ("cd /opt/iiab/iiab" followed by "./iiab-network" or "./runrole network") after all your Ethernet and Wi-Fi network interfaces are plugged in and turned on properly (or unplugged properly!) according the your final deployment topology.

PRO TIP: If you use a USB-to-Ethernet dongle (for upstream Internet, generally) use a permanent marker on the server's correct USB port, so that it's not accidentally moved to another USB port!

Also, do not swap the dongle for another, as each dongle has a fixed/unique MAC address. Worst case if your dongle is lost or broken, you will later (after the new dongle is inserted) need to rerun "./iiab-install --reinstall" from directory /opt/iiab/iiab when your Internet connection is live.

FYI Wi-Fi (e.g. for Internet access, etc) is available on the graphical/desktop version of Ubuntu 20.04 LTS (e.g. use its desktop GUI to set SSID and password) — whereas the server version of Ubuntu 20.04 LTS doesn't offer Wi-Fi out of the box.

NOTE: Some prefer Gigabyte BRIX (a drop-in replacement Mini PC, instead of the Intel NUC) as an Atheros internal Wi-Fi module can be inserted, to scale beyond Intel's soldered-in limit of 12 Wi-Fi connections maximum.

Classrooms within 100 meters of your school server can easily be connected using standard Ethernet wiring, or using Wi-Fi repeaters. Outdoor wiring is possible (preferably fiber optic cables below ground) but check with experts to avoid problems with lightning. Beyond 100 meters, a more deliberate tree and branch solution may be needed.

Please ask questions about your specific school's networking/wiring challenges on mailing list server-devel@lists.laptop.org !

See: How do I provide Wi-Fi (wireless) to all my kids?
See: Can I create a Wi-Fi hotspot using an old laptop?
See: How do I change the wireless network name?
See: Can I name my server something other than http://BOX.LAN ?
See: How do I set a static IP address?
See: Captive Portal Administration: What tips & tricks exist?

What is local_vars.yml and how do I customize it?

To customize your Internet-in-a-Box (IIAB), modify the configuration variables within /etc/iiab/local_vars.yml

It's best to do this prior to installing IIAB, when IIAB's 1-line installer prompts you to do this! After installing IIAB, also consider IIAB's Admin Console (http://box/admin or http://box.lan/admin).

Three common example local_vars.yml files are posted for comparison (MIN-sized, MEDIUM-sized, and BIG-sized). See also this medical example used by the Wiki Project Med Foundation e.g. for http://med.iiab.me

Finally, a couple very practical networking variables are posted at the bottom of the IIAB Networking document.


Customize your IIAB installation (and its selection of apps/services, etc) by proceeding as follows:

  • Edit /etc/iiab/local_vars.yml using a text editor such as vi, nano, or emacs.
  • If IIAB is already installed, you MUST then enact your changes:
  • One way to do this is 'cd /opt/iiab/iiab' followed by './iiab-configure' (run as root, note this can take many minutes on a Raspberry Pi, or possibly even more than an hour depending on your changes!)

  • Or, run the essential 1+6 "post-install" roles then "network" role of Ansible's 1+9 overall stages from Admin Console (log in to http://box/admin or http://box.lan/admin) > Configure menu > Install Configured Options button. Then monitor the progress (typically ~20 min on Raspberry Pi 3, 3 B+ or 4) within Utilities menu -> Display Job Status. PRO TIP: monitor live progress using "tail -f /tmp/job-<JOB NUMBER>"
  • Or, run a (fast) surgical strike using './runrole <ROLE NAME>' as described below!


PRO TIP: Those who prefer the command-line can consider these options: (run as root)

  • Use './iiab-install' for regular IIAB installs, or to continue an install.
  • Use './iiab-install --reinstall' to force running all Stages 0-9, and then the network role. DANGER: You may first want to delete /opt/iiab/iiab/iiab_state.yml (to apply more force, At Your Own Risk!)
  • Use './iiab-install --debug' to run Stage 0, followed by Stages 3-9, and then the network role.
  • Use './iiab-configure' to run Stage 0, followed by Stages 4-9, WITHOUT running the network role.
  • Use './iiab-network' to run the network role.
  • Use './runrole <ROLE NAME>' (formerly ./runtags) to run a single IIAB Stage or Ansible role. Try './runrole' (without parameters) to see its options.


PRO TIP: if you've accidentally made changes that prevent "cd /opt/iiab/iiab; git pull" from merging the latest from GitHub's repo cleanly onto your local machine, consider cloning a fresh copy of repo "iiab". To do this, you'd typically run "cd /opt/iiab; mv iiab iiab.old; git clone https://github.com/iiab/iiab". Then if your /etc/iiab/local_vars.yml is correct, you'd typically run "cd /opt/iiab/iiab; ./iiab-install --reinstall".

See: What services (IIAB apps) are suggested during installation?
See: What are the default passwords?
See: Can I upgrade IIAB software?
See: Can I upgrade or reinstall server apps?
See: What are the best places for community support?

Is a "Rapid Power Off" button possible for low-electricity environments?

Yes. Small medical clinics and electricity-starved remote libraries typically require this, given that Raspberry Pi computers do not have a physical Power Off button, and it's asking way too much for non-technical operators to power off using the Admin Console.

"apache_allow_sudo: True" is the default in /etc/iiab/local_vars.yml to make this possible.

To power off, any user can then click a URL like: http://box/js-menu/menu-files/services/power_off.php (formerly http://box/common/services/power_off.php)

Whereas most schools do not want this, for obvious reasons — a mischievous student could shut down the Internet-in-a-Box at any time! This is the reason most schools prefer "apache_allow_sudo: False". FYI if do you change this variable's value in /etc/iiab/local_vars.yml, you should then run:

 sudo su -
 cd /opt/iiab/iiab
 ./runrole www_options

The "Power Off" button can also be customized in IIAB's Admin Console (http://box/admin or http://box.lan/admin) -> Content Menus -> Load Menu -> change the settings in "Properties of Current Menu" -> Save Menu. More detail on the Content Menus help page and #1689.

See: What is local_vars.yml and how do I customize it?

How do I know what version of IIAB I'm running?

Look in /etc/iiab/iiab.env for the line(s) that begin with "IIAB_RELEASE=". This is followed by a number like "7.2" showing the version level (even if you're running a pre-release of that version!) Context: IIAB_RELEASE is sourced from iiab_base_ver at the top of /etc/iiab/iiab/vars/default_vars.yml during IIAB (re-)installation.

You can also log into your Internet-in-a-Box server's Admin Console (http://box/admin or http://box.lan/admin) and click "About" in the top-right. Look at both fields "Version" and "Commit ID".

The "Version" field should show something more definitive like "release-7.1" — or something else if you're running an earlier pre-release from https://github.com/iiab/iiab/commits (= https://github.com/iiab/iiab/commits/master)

Compare the 40-character string "Commit ID" to the "Latest commit" from those at https://github.com/iiab/iiab/releases (such as https://github.com/iiab/iiab/tree/release-7.1) to reconfirm you have IIAB 7.1 (e.g. it should begin with 58fcf69 if you're running the official IIAB 7.1 from June 6, 2020.

Caution: the letter 'g' was confusingly sometimes added in front of 7-character githash (abbreviated from the full 40-character SHA-1 githash as above) within "install image" filenames, in places like http://download.iiab.io/6.2/rpi/ and http://download.iiab.io/6.2/x86/

See: Is a quick installation possible?
See: What are the default passwords?
See: Can I upgrade IIAB software?

Can I upgrade IIAB software?

Please understand this can DESTROY your Internet-in-a-Box if attempted on an older IIAB !

If your IIAB is more than a few weeks old, it's generally much better to install IIAB from scratch at http://download.iiab.io

But if you're willing to proceed At Your Own Risk (making a backup first) here are instructions, if you've connected your IIAB to the Internet: (about 15 steps)

 sudo su -
 cd /opt/iiab/iiab
 git config branch.master.remote origin
 git config branch.master.merge refs/heads/master
 git checkout master           # If 'git branch' output shows 'master'
 git checkout -b master        # Or, create 'master' branch & check it out.
 git pull

WARNING: At this point it's best to regenerate your /etc/iiab/local_vars.yml settings and customizations, starting with a fresh copy from one of the 3 local_vars_*.yml files (MIN-sized, MEDIUM-sized, or BIG-sized) available in /opt/iiab/iiab/vars

WARNING: You may want to delete /opt/iiab/iiab/iiab_state.yml (to apply more force, AT YOUR OWN RISK!)

Then attempt to upgrade as follows:

 ./iiab-install --reinstall    # Takes about 10-20 min
 cd /opt/iiab/iiab-admin-console
 git config branch.master.remote origin
 git config branch.master.merge refs/heads/master
 git checkout master           # If 'git branch' output shows 'master'
 git checkout -b master        # Or, create 'master' branch & check it out.
 git pull
 ./install                     # Takes about 2-4 min

FYI the 2+2 "git config" lines above are NOT necessary if your .git/config file is already correct in each local repo (/opt/iiab/iiab and /opt/iiab/iiab-admin-console) as explained at https://stackoverflow.com/questions/658885/how-do-you-get-git-to-always-pull-from-a-specific-branch

FYI the 2+2 "git checkout" lines above are NOT necessary if each local repo is already on the master branch. You can run 'git branch' in each of the 2 above (local repo) directories, if you want to see what branch they're on.

See: What is local_vars.yml and how do I customize it?
See: How do I know what version of IIAB I'm running?
See: Can I upgrade or reinstall server apps?
See: Can I get content updates every few months or semester?
See: How do I back up, shrink & copy IIAB microSD cards?

Can I upgrade or reinstall server apps?

1) Most IIAB Apps can be reinstalled to the very latest available version when you're online, as follows:

sudo su -
cd /opt/iiab/iiab
./runrole --reinstall <APP OR ROLE NAME>

WARNING: Make a backup of ALL data and content first, if you do not want to take risks!

SPECIFICALLY: Each app does this a bit differently, but the general rule is to (try) to preserve all content and user data during an app reinstall.

CLARIFICATION 1: IIAB does not support offline reinstalls, as a general rule. In some cases however, you can run ./runrole --reinstall [APP OR ROLE NAME] even when offline, to reinstall certain apps to a cleaner/known state, e.g. whatever app version was most recently downloaded to your system.

CLARIFICATION 2: What is installed (and implicitly, what is not) can be viewed within /etc/iiab/iiab_state.yml


2) HIGH RISK: If your IIAB was recently installed, you can try to reinstall all of your apps to the latest available versions, and reinstall IIAB itself, as follows: (this could take a while!)

sudo su -
mv /etc/iiab/iiab_state.yml /etc/iiab/iiab_state.yml.old
cd /opt/iiab/iiab
git pull     # THIS LINE AT YOUR OWN RISK!
./iiab-install --reinstall

WARNING: Make a backup of ALL data and content first, if you do not want to take risks!

CLARIFICATION: IIAB does not support offline reinstalls, as a general rule. In some cases however, the above will still work even when run offline.


3) Prior to February 2020, IIAB implementers were advised to (at their own risk) individually delete the following files or directories, to attempt an upgrade or reinstall of these common server apps. And then run "cd /opt/iiab/iiab" then "./iiab-install --reinstall" or "./runrole --reinstall <ROLE NAME>" :

  • /library/www/nextcloud/version.php WAS /opt/nextcloud/version.php (Nextcloud version stored therein; reinstalls are easiest if you "sudo mysql" then "DROP DATABASE nextcloud;" (confirmed by "SHOW DATABASES;") and delete the entire /library/www/nextcloud WAS /opt/nextcloud). SEE ALSO: https://docs.nextcloud.com/server/latest/admin_manual/maintenance/update.html AND https://docs.nextcloud.com/server/latest/admin_manual/maintenance/upgrade.html
  • /opt/iiab/kiwix/bin/kiwix-serve (Run "/opt/iiab/kiwix/bin/kiwix-serve --version" to show kiwix-tools version number, since 3.0.2 on 2020-02-13.)
  • /opt/iiab/moodle/config-dist.php (Moodle version stored in /opt/iiab/moodle/version.php — major upgrades may require deleting /opt/iiab/moodle and /library/moodle, dropping the database using "dropdb -U postgres moodle" — and if nec upgrade PostgreSQL below)
  • /library/pgsql-iiab/pg_hba.conf (PostgreSQL version shown by "psql -V" client or "[PATH]/bin/postgres -V" server; major upgrades might require deleting or upgrading data directory /library/pgsql-iiab)
  • /library/ka-lite/database/data.sqlite then "systemctl restart kalite-serve", then you may need to re-register and delete/re-download KA Lite's English "content pack" at http://box:8008/update/languages/ (KA Lite version stored in /library/ka-lite/httpsrv/static/docs/index.html ; major upgrades also require deleting /usr/local/kalite)
  • /library/dokuwiki-<version>/VERSION if reinstall required (DokuWiki version shown by "ls -l /library/dokuwiki")
  • /usr/local/osm (sometimes needed to force a fresh install of OSM / OpenStreetMap)
  • /usr/bin/calibre AND move old .deb's from /opt/iiab/downloads if on RPi (Calibre version shown by "calibre-server --version")
  • /library/calibre-web/metadata.db deletion forces default settings, and restores a minimal metadata.db (1. version is implied by "cd /usr/local/calibre-web; git log" — or since early 2020 "cd /usr/local/calibre-web-py3; git log" — which can also be compared to the githashes shown at https://github.com/janeczku/calibre-web/releases 2. Calibre-Web will let you check from the command-line in future, per #1624 3. Log in then click "Admin" at the top of http://box/books, at the bottom the current version number is listed, so long as you're on the "stable update channel" which is the default)
  • /library/games/minetest and/or /library/games/0.4.17.1 version number may vary! (delete these dirs as nec, to help force a reinstall of Minetest)
  • /usr/libexec/iiab-startup.sh (delete this if you want to upgrade to IIAB's latest e.g. /opt/iiab/iiab/roles/2-common/templates/iiab-startup.sh)
  • [Deletion of /library/wordpress is optional; online-upgrade is automatic/mandatory when running "./iiab-install --reinstall" or "./runrole wordpress" in /opt/iiab/iiab] Also Note: WordPress increasingly upgrades itself, when used online (WordPress version stored in /library/wordpress/wp-includes/version.php; major upgrades may also require you to drop database "iiab_wp" by running "mysql" as root, and then "drop database iiab_wp;" confirmed by "show databases;". Dropping the db is an easy way to change the language of WordPress' user interface — or this can also be done in http://box/wordpress > Settings > General > Site Language — and if the desired language is not one of your OS's installed locales, WordPress will try to download it.)
  • [Deletion of /library/mediawiki-ACTUAL.VERSION.NUMBER/LocalSettings.php no longer required, BUT database schema changes on almost every upgrade. So: automatic installation of latest (during "./iiab-install --reinstall" or "./runrole mediawiki") generally requires you first drop or update mysql "iiab_mediawiki"; for database/schema upgrades read about update.php in MediaWiki Manual's Upgrading FAQ] (MediaWiki version stored in /etc/apache2/sites-available/mediawiki.conf pointing to /library/mediawiki-ACTUAL.VERSION.NUMBER, as installed per /opt/iiab/iiab/roles/mediawiki/defaults/main.yml; finally feel free to delete older dirs of the form /library/mediawiki-OLD.VERSION.NUMBER after upgrading)
  • [Upgrading a very recent version of Lokole MAY require deletion e.g. with "rm -rf /library/lokole"] In any case, attempt to install the latest Lokole using: "./runrole --reinstall lokole". (Lokole version is shown by "grep ^Version /library/lokole/venv/lib/python3.*/site-packages/opwen_email_client-*/*" [METADATA on some OS's, PKG-INFO on others]. If removing Lokole entirely, you may also want to clear out its Apache config files: "rm -rf /library/lokole /etc/apache2/sites-*/lokole.conf")
  • [No file deletion of /opt/elgg-ACTUAL.ELGG.VERSION/index.php required, online-upgrade is automatic/mandatory during "./iiab-install --reinstall"] (Elgg version shown by "ls -l /opt/elgg")
  • [No file deletion required, online-upgrade is automatic/mandatory during "./iiab-install --reinstall"] (Kolibri version shown by "/usr/bin/kolibri --version")
  • [No file deletion required, online-upgrade or offline-reinstall is automatic/mandatory during "./iiab-install --reinstall"] (phpMyAdmin version shown by "ls -l /opt/phpmyadmin")
  • [No file deletion required, though in the past /library/www/html/sugarizer/index.html had to be moved] (Sugarizer version now shown by "ls -ld /opt/iiab/sugarizer*" or in the past, "ls -l /library/www/html/sugarizer"; major upgrades might require deleting directories /opt/iiab/sugarizer-server/node_modules and MongoDB's entire /library/dbdata/mongodb)
  • [No file deletion required, online-upgrade is automatic/mandatory during "./iiab-install --reinstall" or "./runrole --reinstall gitea"] (Gitea version is shown by "ls -l /library/gitea/gitea" and in the bottom-left of http://box/gitea)

WARNING #1: Data loss of kids', teachers' and users' personal materials is always possible, ALWAYS back up any relevant databases first!

WARNING #2: Beware you will likely lose settings that you've set within Internet-in-a-Box's Admin Console (http://box/admin or http://box.lan/admin).

WARNING #3: Testing is ongoing to make sure this works sufficiently in typical situations like these 2 below, ensuring that a wholesale revert to default settings is at least plausible:

  1. When intermittently online, an operator may want an online upgrade of a server app to the very latest available version.
  2. When completely offline, an operator might want an offline reinstall of a server app using its original zipfile-or-similar installer that resides within /opt/iiab/downloads

See: What services (IIAB apps) are suggested during installation?
See: What are the default passwords?
See: KA Lite Administration: What tips & tricks exist?
See: How do I back up, shrink & copy IIAB microSD cards?

Can I get content updates every few months or semester?

Great question, keeping in mind the near-impossibility of downloading large Content Packs to remote locations in the developing world.

Despite these obstacles, remote upgrades are becoming increasingly possible now that high-bandwidth connections are available within cities in the developing world. For Example: bringing a rural IIAB device into the city for a night (or a few days) to plug it into an online cablemodem, can be a very efficient and affordable way to update content — particularly within countries that offer unlimited downloads, at a fixed monthly rate.

Notwithstanding, terabyte download costs explain why drop-shipped hard drives containing "complete content catalogs" are often still more economic and efficient than downloading.

Please watch the HOW-TO videos on Internet-in-a-Box's YouTube channel (several available as .mp4 and .WebMD) to get up to speed with downloading & installing content to your IIAB!

On the high end, IIAB's Admin Console (http://box/admin or http://box.lan/admin -> Install Content) supports piecewise incremental content updates for those schools with extremely high/affordable bandwidth. As of early 2017, note that Content Packs must be manually removed, when space is needed (e.g. after that content is no longer in use). An exception is KA Lite, whose administrative interface (log in as "Admin" to http://box:8008) supports deletion of lessons/videos, as well as downloading new ones.

As a practical matter, remote schools may receive updates via hard drive or USB memory stick every semester or so, flown/driven in by a partner, bringing new maps/encyclopedias/E-books and video lessons.

Keep in touch as new options evolve! Make contact with http://unleashkids.org to keep up with other communities' offline content collections and recommendations.

See: What are the default passwords?
See: How do I customize my Internet-in-a-Box home page?
See: How do I add ZIM files, like Wikipedia?
See: Can I permanently attach an external USB drive, to add more content?
See: What are the best places for community support?

What security tips exist?

Please read more about the 'iiab-admin' Linux user and group, which allow you to log in to IIAB's Admin Console:

Some IIAB installations include ssh keys which permit developers to log into your machine, to enable remote support during Beta programs and similar. You can disable this feature by running terminal command rm -f /root/.ssh/authorized_keys

Whether running your server online or offline, please see IIAB/Security and help us contribute to this evolving knowledge & repertoire of 21st century hygiene, thanks to professional volunteers from many backgrounds.

See: What are the default passwords?
See: How can I remotely manage my Internet-in-a-Box?
See: Is campuswide access possible for all server apps?
See: What are the best places for community support?

How can I remotely manage my Internet-in-a-Box?

Beginners typically prefer TeamViewer (see paragraphs further below!)

Large-scale implementers should consider rolling their own OpenVPN for all remote administration needs, or using a "freemium" service (free, or pay for more features) like https://ngrok.com or remot3.it (formerly known as Weaved). Dynamic DNS services like No-IP (https://noip.com) are also possible, if you want to roll your own. #318 #1124

Small-scale implementers should consider free services like https://ngrok.com and similarly https://dataplicity.com (in the past https://serveo.net was useful but is often offline in 2019/2020) to expose your server to the Internet, permitting maintenance via ssh and http. Or ask us about IIAB's own XSCENET, which is a minimal remote management solution (with a much more basic remote console, enabling ssh and http among a trusted group). Contact holt @ unleashkids.org for details.

NOTE: Developers' ssh keys traditionally used to come included with install images, to enable remote support during Beta programs and similar. Read "What security tips exist?" if you want instructions to remove these keys.

Beginners and those with a graphical desktop environment (like X Windows) on their Internet-in-a-Box often take advantage of TeamViewer for full visual/remote support. This can be priceless when mentoring/learning at a distance, thanks to TeamViewer's screen-sharing, keyboard-sharing and mouse-sharing, to onboard new operators who are not yet able to navigate GNU/Linux and its command line tools. In a graphical desktop environment, simply install TeamViewer, which by default randomizes TeamViewer's password (needed for remote access) every time TeamViewer is launched, preserving local operator control.

You can also enable TeamViewer's fully "unattended access" by setting a "permanent" password for remote access within: Settings/Extras/Options -> Security -> Password.

Raspberry Pi: If you're using the Raspberry Pi OS (either the "Lite" server edition, or the "with desktop" edition including a graphical desktop environment) then you want the minimal "TeamViewer Host" (e.g. https://download.teamviewer.com/download/linux/teamviewer-host_armhf.deb version 15.12.4 as of 2020-12-10). It works as a single-click install (or "apt install ./teamviewer-host_armhf.deb", or "dpkg -i teamviewer-host_armhf.deb; apt-get -f install") and includes seamless ongoing upgrades via apt.

Bonus: headless installation/configuration is also now supported (e.g. on Raspberry Pi OS Lite) with "teamviewer info" "teamviewer passwd <ACTUAL-PASSWORD>" and "teamviewer help" per https://community.teamviewer.com/English/kb/articles/6318-how-to-install-teamviewer-for-linux In future, it might even be possible to install directly with "apt install teamviewer-host" ?

Admin Console: Please note that "systemctl restart iiab-cmdsrv.service" is sometimes necessary when http://box.lan/admin shows red errors upon login.

See: What are the default passwords?
See: What security tips exist?
See: What are the best places for community support?

How do I view usage statistics?

To help teachers view which ZIM files are most popular:

  1. Ensure "./iiab-install [--reinstall]" or "./runrole kiwix" was already run (installing IIAB 6.5+ takes care of this) with the following in local_vars.yml
    • kiwix_install: True
    • kiwix_enabled: True
  2. Visit http://box/awstats or http://box/awstats/awstats.pl to view stats

Noting: [warning some of the instructions below are stale as of 2019]

  • IIAB menuing (links on main page at http://box) can be reverted to the untabulated links (on port 3000) if nec, using https://github.com/iiab/iiab-menu/blob/master/config.json
  • If updating from a much earlier IIAB remove that file (“rm /library/www/html/iiab-menu/config.json”) then update to the latest IIAB menus by running ("cd /opt/iiab/iiab-menu; git pull; ./cp-menus")
  • N.B. there can be an unintended consequence in that the url for Android APKs will be set back to the default if you have overridden it.
  • Underlying code is at: PR #585
  • Please help us improve this community analytics approach if you can: #1268

How do I add ZIM files, like Wikipedia?

Please read "How do I customize my Internet-in-a-Box home page?" and see the HOW-TO videos on Internet-in-a-Box's YouTube channel (several available as .mp4 and .webm) to get up to speed with downloading & installing content to your IIAB!

1. Definitely consider Internet-in-a-Box's Admin Console (http://box/admin or http://box.lan/admin) -> Install Content as an alternative to the command-line!

Likewise if you have content on hand (like ZIM files or OER2Go/RACHEL modules) on a portable USB disk or USB flash drive, insert this USB drive into your Internet-in-a-Box (IIAB) and then use http://box.lan/admin -> Install Content -> Manage Content to copy (install) the content you need, onto your IIAB.

PLEASE NOTE: The USB drive must have the same layout as the server, i.e. zims are in library/zims/content and OER2Go modules are in library/www/html/modules and the usb must be mounted in /media/usb(0-7), which is where usbmount puts them automatically.

Also, the first time a usb is accessed a catalog is created which may take enough time that you see GET-EXTDEV-INFO Failed and reported No response from CMDSRV in 30000 milliseconds". Please simply try again in a minute to let the catalog finish building.

This copying of content is two-way in that you can also copy zims and OER2Go/RACHEL modules to the usb drive in order to take them to another installation.

2. Or...if you really prefer the command-line...download the ZIM file you want (e.g. from http://download.kiwix.org/zim/) to /library/zims/content — for example:

 cd /library/zims/content/
 sudo wget https://download.kiwix.org/zim/wikipedia/wikipedia_km_all_novid_2019-03.zim

Then run /usr/bin/iiab-make-kiwix-lib to rebuild the Kiwix index:

 sudo iiab-make-kiwix-lib

Finally, test that your new ZIM file is browsable at http://box/kiwix and that its search features (on the top-right of the page) are working!

LEGACY ZIM FILES CLARIFICATION: Most all ZIM files generated since mid-2018 contain an internal search index. There are a few rare exceptions however. In some cases title search works but full text search is impossible, because no such index was ever built. In yet other cases (some older/legacy ZIM files, typically from http://download.kiwix.org/portable) the ZIM comes with associated index files that must be placed in /library/zim/index — see also: https://github.com/iiab/iiab/blob/master/roles/kiwix/README.rst

See: What can I do with E-books and Internet-in-a-Box?
See: Can teachers display their own content?
See: What are the default passwords?
See: How do I customize my Internet-in-a-Box home page?
See: Can I upgrade or reinstall server apps?
See: Can I permanently attach an external USB drive, to add more content?

KA Lite Administration: What tips & tricks exist?

Khan Academy videos and exercises are extremely popular thanks to KA Lite, which stores these famous videos (.mp4) and thumbnails (.png) within /library/ka-lite/content, and can be customized in different ways. Note this folder also contains 3 critical subfolders, after you've installed KA Lite's mandatory English content pack as part of a new install: (IIAB's 1-line installer does this for you!)

  • assessment (836 MB on a new install)
  • locale (16 KB on a new install)
  • srt (subtitles, 105MB on a new install)

To change KA Lite's Admin and user-level passwords, see "What are the default passwords?" above.

For starters, log into http://box:8008 as the Admin user, and learn how to install language packs and then download/delete videos in different languages.

Instead of the above, many prefer torrenting the compressed KA Lite videos (available in 7 common languages) as their storage footprint is more than 3X smaller!

Traditionally Windows users use BitTorrent client software like Tixati, and Linux users use command-line BitTorrent tools like aria2 (trying --force-sequential or "aria2c -Z URL1.torrent URL2.torrent" to download several). Or, a visual interface to BitTorrent can now be used as part of your Internet-in-a-Box:

A. Internet-in-a-Box can now kickstart the BitTorrent download(s) for you, if you set "transmission_install" and "transmission_enabled" to True in /etc/iiab/local_vars.yml and pick the KA Lite language(s) you need. Install and launch Transmission by running "cd /opt/iiab/iiab" then "./runrole transmission" then "./iiab-network".

B. Monitor your BitTorrent download(s) at http://box:9091 using Admin/changeme until download is confirmed complete (can take hours if not days!)

C. Carefully move all videos/thumbnails from /library/transmission into /library/ka-lite/content (DO NOT OVERWRITE SUBFOLDERS assessment, locale, srt !)

D. Log in to KA Lite at http://box:8008/updates/videos/ using Admin/changeme then click "Scan content folder for videos" (can take many minutes!)

Separately, you can run "/opt/iiab/iiab-factory/content/khan/ka-scan" to remove obsolete videos, which will be moved to /library/ka-videos/obsolete to help you free up space!

More advanced administrators can take a look at the scripts in /opt/iiab/iiab-factory/content/khan and /opt/iiab/iiab-factory/box/generic contributed by Tim Moody.

In general, you can restart the KA Lite service using "systemctl restart kalite-serve" if attempting such changes under the hood. Three common such examples follow:

Mandatory English Pack taking too long to download? Mysteriously, KA Lite's mandatory 1GB (929,916,955 byte) English Pack can take hours to download over certain ISP's and network environments, when installing it using the official command "kalite manage retrievecontentpack download en". Speedier 3-Step Alternative If So: (1) Download en.zip manually (using another ISP if necessary) from http://pantry.learningequality.org/downloads/ka-lite/0.17/content/contentpacks/en.zip using wget or any browser. (2) Install it by running "kalite manage retrievecontentpack local en en.zip" (it's no longer necessary to type in "export KALITE_HOME=/library/ka-lite", as /usr/bin/kalite is now a bash wrapper to "venv" that does that automatically). Brief Help is available if you enter "kalite manage help retrievecontentpack". (3) Run "du -hs /library/ka-lite/content/" to verify that 940MB or more has successfully been installed there (and log in as Admin to http://box:8008 -> Manage -> Language to be 100% sure!)

Multilingual? Consider running 2 or 3 instances of KA Lite on the same Internet-in-a-Box server, e.g. we sometimes put English on port 8008, Spanish on port 8007, and French on port 8006. Examine the /opt/iiab/iiab-factory/content/khan/mk-other-kalite script if you too want *direct* access to Spanish videos in /library/ka-lite-es, or *direct* access to French videos in /library/ka-lite-fr, etc. Typically implementers run "mk-other-kalite es 8007" or "mk-other-kalite fr 8006" (make sure your mk-other-kalite is up-to-date!)

If you do this, make sure your IIAB's firewall (iptables) has the ports open that you need for "campus-wide" (WAN side) access to these materials. Make any changes you need to the ports_externally_visible: variable in /etc/iiab/local_vars.yml and consider these 2 older examples: open ports below 8008, open up port 4244.

Monolingual in Spanish or French or similar? Fool /opt/iiab/iiab-admin-console/roles/js-menu/templates/config.json.j2 (live at /library/www/html/js-menu/config.json) by changing the line with "es-kalitePort" from 8007 to 8008 — or change the line with "fr-kalitePort" from 8006 to 8008 (this works to get rid of English, even if "en-kalite-Port" remains 8008). A separate/crude hack to get other languages to work with ports 8006 or 8007 is to put "lang": "fr", or "lang": "es", in the .json file in the /library/www/html/js-menu/menu-files/menu-defs directory.

More Documentation? Please see the original KA Lite README.

Similar for Calibre: Modify this same config.json file (live at /library/www/html/iiab-menu/config.json) to change calibrePort (e.g. from port 8010 to 8080) within IIAB's dynamic menuing system.

What about Kolibri, also from Learning Equality? Please see the Kolibri README.

See: What are the default passwords?

How do I add zoomable maps for my region?

Please explore our Live Demo and read our new IIAB Maps instructions from September 2020 for IIAB 7.2, which explains:

INVITATION: If you can help ongoing efforts to polish maps for children in offline schools in all countries, directly contributing to beautifying OpenStreetMap (VIDEO) thereby bringing Earth to life for all, Thank You! Read more at (#877) and please do get in touch to learn more!


OLDER STUFF, JUST FOR THE RECORD...

As of August 2018, OpenStreetMap (OSM) regional map packs became almost 10X smaller, offering far more detail, thanks to regularly published vector-based tilesets (instead of the older bitmap tiles). Legacy instructions for Sept 2018's IIAB 6.6:

Earlier online samples are viewable for the San Jose in the Bay Area (includes this 109MB regional dataset) or choose Central America & the Caribbean (includes this 1.1-1.8 GB regional dataset).

ADVANCED/UNSUPPORTED: one day it might be possible to combine multiple .mbtiles files (vector map files, highlighting different regions) into a single .mbtiles file, using append2region.

ALTERNATIVE MAPS: the 10-layer http://oer2go.org/viewmod/en-worldmap-10 (10.7GB) can be downloaded to /library/www/html/modules. Its map data is not as comprehensive as IIAB's 2018 or 2019 maps, and it lacks satellite photos, but it does cover the bases well with basic global maps. One Catch: this download can take hours, as it includes a huge number of small files.

WordPress & Moodle Administration: What tips & tricks exist?

How do I set the WordPress URL (like http://box/wordpress) so it works for everyone?

  • Make sure the very first login to WordPress uses the URL that your community wants to use long-term (e.g. http://box.lan/wordpress on the LAN-side of IIAB, or a campus-wide URL on the WAN-side of IIAB). WordPress will "permanently" hard-code the URL from then onwards.
  • If you must change it later, follow the WordPress instructions for Changing The Site URL which offers 5 different ways to get this done, 2 of which involved editing /library/wordpress/wp-config.php

How do I optimize WordPress and Moodle for high-traffic usage?

  • Then run as root: "cd /opt/iiab/iiab && ./runrole www_options && reboot"
  • Of course, make sure your Internet-in-a-Box has enough RAM and disk! Background: #1147

Optionally you might further customize the 5 settings {upload_max_filesize, post_max_size, memory_limit, max_execution_time, max_input_time} in /etc/php/7.x/fpm/php.ini (reboot if so!) This can also be done prior to IIAB's install, about halfway down /opt/iiab/iiab/roles/www_options/tasks/main.yml

How do I copy a complete installation of WordPress to another Internet-in-a-Box?

How do I integrate IIAB Apps and Content Packs (and custom menuing!) into a larger WordPress site?

Please see Joshua Kanani's WordPress plugin instructions. Thank you for providing feedback in support of this emerging effort!

How do I set the Moodle URL (like http://box.lan/moodle) so it works for everyone?

See: What is local_vars.yml and how do I customize it?
See: Can I upgrade or reinstall server apps?
See: Is campuswide access possible for all server apps?

Elgg Administration: What tips & tricks exist?

You may want to set a campus-wide URL for your Elgg social network (other than the http://box/elgg default) such as http://hogwarts/elgg or http://10.10.10.10/elgg.

If so, please see the table `elgg_sites_entity` as documented in roles/elgg/templates/elggdb.sql.j2

It (might) also be possible to have more than one Elgg URL, each with a different hostname and/or IP address. However this (might) possibly cause the creation of distinct Elgg sites, each with different content.

More Documentation? Please see the original Elgg README.

See: What are the default passwords?
See: Can I upgrade or reinstall server apps?

Captive Portal Administration: What tips & tricks exist?

When installed on Raspberry Pi OS, Internet-in-a-Box (IIAB) offers the option of a basic Captive Portal since IIAB 6.7, so new users don't have to type in URL's (like http://box, http://box.lan or http://172.18.96.1) into their browser.

This is similar to pages that appear automatically when you connect to Wi-Fi in airports/hotels/restaurants. It helps provide immediate access to those who have trouble typing in URL's, or live in countries that do not use Latin-based languages in their URL's.

DEVELOPERS: please see the Captive Portal README.md for a high-level summary of its mechanics and how it works, then look through the code here: https://github.com/iiab/iiab/tree/master/roles/captiveportal/

CAUTION: IIAB's Captive Portal is experimental, so you need to try it on the smartphones and client devices most common in your community. Please also see these older Known Issues.


Captive Portal is installed but not enabled in IIAB 7.1, but here are instructions to enable it:

  • sudo su -
  • Run 'nano /etc/iiab/local_vars.yml' to set both these variables: (around Lines 100-101)
 captiveportal_install: True
 captiveportal_enabled: True
  • cd /opt/iiab/iiab
  • ./runrole captiveportal     # Or, if necessary: ./runrole --reinstall captiveportal


Conversely, note that many schools prefer to disable Captive Portal entirely, which can be done as follows:

  • sudo su -
  • Run 'nano /etc/iiab/local_vars.yml' to set this variable to False: (around Line 101)
 captiveportal_enabled: False
  • cd /opt/iiab/iiab
  • ./runrole captiveportal


As new phones and devices appear, different browsers on different versions of Android, Windows, iOS and Linux will require usability (UX) refinements and we'd love your help!

If you face Captive Portal issues, please send us screenshots (or photos of any error messages!) by clicking "New issue" in the top-right of: https://github.com/iiab/iiab/issues — don't forget to include the make/model of your client device along with the specific version of its OS and browser!

Finally if you're someone who can improve IIAB's Captive Portal functionality directly, please look over checklist #1182 and explore its Ansible & Python code here.

See: My Android device says "Connected, no Internet" and won't browse http://box
See: Any other networking tips?
See: What is local_vars.yml and how do I customize it?

How can I try XO laptop services?

Starting with IIAB 6.5+, you can test XO laptop services by uncommenting lines under "5-XO-SERVICES" within /etc/iiab/local_vars.yml

Finally, run "cd /opt/iiab/iiab" then "./iiab-install --reinstall" being patient until it finishes.

See: What is local_vars.yml and how do I customize it?

Can my XO-based server boot with a unique startup sound?

Yes, when using an XO as a server, it is easy to mistake it for a child's laptop, when it has been detached from storage and networking components.

Here are instructions for adding a unique startup sound.

Is campuswide access possible for all server apps?

No: several of these server apps fail when accessed over the WAN side of an Internet-in-a-Box, but work well over the LAN side or internal-WiFi of an Internet-in-a-Box.

Still: WordPress, Nextcloud, Moodle and others can be modified using an evolving arsenal of tricks that we hope you too can help refine!

The challenge is to get the most urgently needed campuswide LMS-like apps working well enough for campus-like environments (rather than perfectly in all situations, unfortunately not possible given modern cybersecurity threats!)

ASIDE: efforts are ongoing to make snappy/mnemonic URL's (like http://box/books) in support of teachers' and medical clinics' desires to rapidly onramp information literacy among new users.

See: What security tips exist?

Is there a file like AUTOEXEC.BAT to run jobs on boot?

Many Linux OS's offer /etc/rc.local — Internet-in-a-Box (IIAB) recommends /usr/libexec/iiab-startup.sh if you're concerned that local operators might overwrite rc.local

/usr/libexec/iiab-startup.sh is put in place by iiab-startup.yml at the end of Stage 2 during IIAB's installation.

Can I permanently attach an external USB drive, to add more content?

If your Internet-in-a-Box (IIAB) internal storage is full, here's a way to place additional content on an external USB drive or USB memory stick.

Format the USB drive with the ext4 filesystem:

 mkfs.ext4 /dev/sdX

Before running the above, change 'X' so that it corresponds to your actual USB drive. You can uncover this (its device name) by running commands like "lsblk" or "blkid" with "df -h".

Label the USB drive (e.g. "IIAB-LIBRARY-EXT" in this case) again filling in 'X' before you run:

 e2label /dev/sdX IIAB-LIBRARY-EXT

Put this line (using the same label as above) into your IIAB's /etc/fstab

 LABEL=IIAB-LIBRARY-EXT  /library-ext  ext4  defaults,nofail  0  0

Create the needed mount point on IIAB, by running:

 mkdir /library-ext

After you've tested that your USB drive automounts correctly on boot, create the symbolic link(s) you need — so that IIAB can find any Content Packs you've placed on the external USB drive.

Example command: (if for example you placed all your OER2Go/RACHEL modules onto the external USB drive, so they appear as /library-ext/www/html/modules/ when mounted)

 ln -s /library-ext/www/html/modules/ /library/www/html/modules

CLARIF 1: This example assumes you're copying Content Packs onto the external USB drive so they'll appear under /library-ext using the very same layout of sub-folders that IIAB uses for content within /library on its internal drive.

CLARIF 2: If this USB drive is plugged into another Linux computer, the above example folder might automount differently, e.g. appearing as /media/usb/www/html/modules

CLARIF 3: When copying large Content Packs, we strongly recommend the rsync -av command, so that files are not lost and the copy process can continue if interrupted — while preserving ownership and timestamps.

See: Can teachers display their own content?
See: How do I customize my Internet-in-a-Box home page?
See: How do I add ZIM files, like Wikipedia?
See: Can I install IIAB onto a USB drive?

Can I install IIAB onto a USB drive?

This can fail with consumer-grade hardware, because the boot device's USB 3.0 frequencies (e.g. radiating from a USB flash drive, Raspberry Pi "hat" or other peripheral — especially those lacking a ferrite RF choke and/or lacking proper USB3 cable shielding) very often interfere with the Raspberry Pi's internal Wi-Fi.

As explained in #2638, raspberrypi/firmware#1430 and this Intel White Paper:

USB 3.0 Radio Frequency Interference Impact on 2.4GHz Wireless Devices
https://www.intel.com/content/www/us/en/products/docs/io/universal-serial-bus/usb3-frequency-interference-paper.html

DO THIS FIRST: A 1st order test of the quality of your hardware is to set up USB 3.0 boot (do this prior to installing IIAB) then connect to your building's 2.4GHz (NOT 5GHz !) Wi-Fi — without an Ethernet cable! Then carefully test web/online tasks like running apt update, downloading large files, ping mit.edu, etc — evaluating packet loss over many minutes to be sure. (If your hardware/layout cannot function reliably as a Wi-Fi client device, don't even bother trying to set it up as an Internet-in-a-Box learning hotspot!)

This can work however, if you've acquired the right RF-shielded hardware, and set it up carefully. So if you've carefully validated your hardware/setup's ability to work with 2.4GHz Wi-Fi, then installing Internet-in-a-Box (IIAB) onto a USB stick or USB drive is possible — e.g. by following Shanti Bhardwa's Steps 1 to 14 (#2585) — or Dirk Uys' Steps 1 to 14 (#1799) for Raspberry Pi 3-and-higher.

For Raspberry Pi Zero W, Step 17 will also be necessary (copying bootcode.bin to the first partition).

THEFT WARNING: Of course there is a risk your USB (flash or hard disk) drive might be stolen, as there's always a temptation for others to "borrow" external USB devices. For many similar/such practical reasons, an IIAB microSD card (placed inside the Raspberry Pi) usually makes much more sense.

PRIVACY AND SECURITY WARNING: If you're booting from a USB device (e.g. an external disk or flash drive) please set usb_lib_enabled: False in /etc/iiab/local_vars.yml prior to installing IIAB, so that your filesystem is not viewable at http://box/usb. You can also do this after installing IIAB, using Admin Console (http://box.lan/admin) > Content > Services Enabled > USB based content libraries (uncheck the checkbox) > Save Configuration > Install Configured Options — give it 1-2 minutes and then verify that this completed in Utilities (menu) > Display Job Status — and finally reboot. (#2552)

See: What hardware should I use?
See: What is local_vars.yml and how do I customize it?
See: Can I permanently attach an external USB drive, to add more content?

How do I back up, shrink & copy IIAB microSD cards?

Privacy Practices for removing student/teacher personal data and protecting medical confidentiality will emerge at #1516 and/or IIAB/Security.

IIAB communities around the world would love your help making a 1-to-2 minute "Offline YouTube" (friendly screencast) outlining the best approach(es) below — and how to use them — please if you can, do consider making any such very short video!

1. Self-Clone your entire Internet-in-a-Box (IIAB) e.g. to an external microSD card, using IIAB's Admin Console: http://box.lan/admin > Install Content > Clone IIAB (details).

  • This approach works to copy to another brand/model of microSD card that happens to be a few bytes smaller!
  • Copy from your IIAB's internal microSD to an external microSD (placed in a microSD card reader/writer, that plugs into one of your IIAB's USB ports).
  • This is based on piclone_cmd which brings the Raspberry Pi's "SD Card Copier" approach below (piclone) to the command-line, and other platforms and OS's (e.g. 64-bit Ubuntu not just 32-bit Raspberry Pi OS) (#2268).
  • This approach can be slower than 3. and 4. (below) but is far easier to understand (and a real lifesaver in the field, when duplication hardware/peripherals/adapters are often scarce!)

2. Likewise a very easy/friendly approach is possible if you have access to the "Desktop" (graphical) version of Raspberry Pi OS. Simply click the Raspberry start icon (top-left of screen) > Accessories > SD Card Copier:

  • This approach works to copy to another brand/model of microSD card that happens to be a few bytes smaller!
  • Copy from the Raspberry Pi's internal microSD to an external microSD (placed in a microSD card reader/writer, that plugs into one of your Raspberry Pi's USB ports).
  • You can also copy one external microSD card to another, if you have 2 microSD card readers/writers.
  • Instructions:
    • Read the "SD card copier" section which is the third headlined section in "The latest update to Raspberry Pi OS" (below sections "Bluetooth" and "Bluetooth audio") from May 13, 2016. Likewise you can read the equivalent text underlying its Help screen.
    • The underlying command is piclone.
    • This approach can be slower than 3. and 4. (below) but is far easier to understand (and a real lifesaver in the field, when duplication hardware/peripherals/adapters are often scarce!)

3. On Linux or macOS, we strongly recommend the built-in command dd if you are comfortable at the command-line.

  • If you are copying to a different brand/model of microSD card that happens to be a few bytes smaller, 'dd' alone will fail!
  • If so, you can solve this using the min-sd and cp-sd commands found here (min-sd is the underlying magic that shrinks or truncates microSD cards, without any data loss).
  • On macOS, 'dd' will run extremely slowly if you don't use macOS's own special syntax. So we recommend this macOS recipe, as an example:
  1. Insert a brand new microSD card
  2. Determine mount point of card: diskutil list
  3. Unmount card (this presumes its mount point is /dev/disk2): sudo diskutil unmountDisk /dev/disk2
  4. Copy source file (e.g. source.img) from Mac's disk to card: sudo dd if=source.img of=/dev/rdisk2 bs=4m
  5. Eject card: sudo diskutil eject /dev/disk2

4.1 On Windows 10, strongly consider dotNet Disk Imager which is a "dotNet equivalent to Win32 Disk Imager, but more lightweight and with more features." [Several of us use this on Windows 8 and Windows 10, e.g. Tim Moody writes: "first time it stopped on the second partition after it asked me to format, like win32 imager...but it has a button to wipe the device and after I did that it completed"].

4.2 On Windows 7 or Windows 8 (must be prior to Windows 10!) consider the "Read" button in Win32 Disk Imager to back up an IIAB microSD to your Windows hard disk:

  • If you are copying to a different brand/model of microSD card that happens to be a few bytes smaller, this will fail! In which case try any of the alternate approaches listed above and below, or buy a larger microSD card.
  • Before you begin the copy, specify a proper path and filename in the "Image File" textfield on top. We recommend you choose a filename ending with ".img"
  • Copying from a microSD card will NOT work on Windows 10, which views the card as two drives, one of which Windows claims is not formatted (because it's Linux / ext4). It appears Win32 Disk Imager will however copy from microSD's on all versions of Windows up to and including Windows 8.1.

5. Is it possible Clonezilla can do part of this job? Clonezilla is free software for disk cloning, disk imaging, data recovery, and deployment.

See: How do I customize my Internet-in-a-Box home page?
See: Can I upgrade or reinstall server apps?
See: What security tips exist?
See: Can I permanently attach an external USB drive, to add more content?
See: Can I install IIAB onto a USB drive?

What are the best places for community support?

As our community forums are being rebuilt (#1759) please consider the "Discussion" page at Wikipedia's Internet-in-a-Box Meta-Wiki — and don't hesitate to write to these 2 original mailing lists:

The fastest response will arise if you post a "New issue" here:

Those who do not have GitHub accounts should consider creating one.

Describe your issue in full (with context) so that others may help — including screenshots if possible, and output from the sudo iiab-diagnostics command (including the actual pastebin URL, Thanks!)

While you can write to bugs @ iiab.io, we apologize that a response is NOT guaranteed.

Consider also our Community/Design calls, that take place live most every Thursday, at 10AM NYC Time, off of: http://MINUTES.IIAB.IO

Finally, please take inspiration from our earlier work with almost a thousand "One Laptop Per Child" global grassroots communities, enabling their nearby educational communities to connect on a local level, very powerfully and directly Helping Each Other: http://olpcMAP.net

BUSINESS CONTACT: if need to get in touch regarding strategic alliances or partnerships with Internet-in-a-Box, please email Adam Holt (holt @ unleashkids.org).

See: What are the default passwords?
See: How can I remotely manage my Internet-in-a-Box?
See: What are the default passwords?
See: How can I help?

How can I help?

Please see the Contributing section of Internet-in-a-Box.org

Take a look at our weekly Agenda/Minutes to see what others are working on.

Technical developers please see our IIAB Contributors Guide and look through the tasks in our upcoming milestones.

Implementers and IT people can help us improve this very (wiki i.e. editable) document (FAQ.IIAB.IO) as well as Wikipedia's Internet-in-a-Box Meta-Wiki.

Librarians, videographers and designers are needed to help us deepen our communications — please make contact directly if you're able to help! With apologies that our original list of volunteer microtasks is currently quite stale.

The voices and participation of in-field implementers and teachers are always welcome (over WhatsApp or Skype if necessary, even if your English is not perfect!) as you are the 1st-line actionists that literally make this all possible! "TLC's" a.k.a. Technology Learning Coordinators a.k.a. local heros are indeed the secret sauce that make everything possible~

Finally, everyone is encouraged to post ideas and suggestions to these 2 community mailing lists:

Serious digital librarians are also invited us to join our content engineering calls, that occur on certain Saturdays, building off our [1] Content Hackathon, refining "web scraping" techniques that make available entirely new (categories of) high-quality Content Packs.


This section below is years-old and needs a complete overhaul:

Take seriously the "Features Planned" section of our Features page helping schools globally getting their highest priorities implemented.

Schools greatly benefit from testing on diverse hardware if you can help! Online contribution are strongly welcome, with in-person human interaction at our quasi-quarterly face-to-face meetups advancing our education efforts faster yet.

Finally, organizing everyone's many ideas, use cases and docs is real work, and as such we very strongly welcome savvy communicators!

See: How can I remotely manage my Internet-in-a-Box?
See: What are the best places for community support?
See: How can I donate to Internet-in-a-Box?

How can I donate to Internet-in-a-Box?

Please write if you can assist specific efforts in Haiti, Mexico — or otherwise.

Thank you!

Where can older versions of IIAB/XSCE be found?

Release History:

Since May 2017, IIAB code has been available at: https://github.com/iiab

Prior to May 2017, XSCE code was available at: https://github.com/xsce/xsce

Older RPM builds from 2013 may be available from http://archive.org

See: What are the best places for community support?
See: How did IIAB/XSCE's design evolve?

How did IIAB/XSCE's design evolve?

Here's our brief-but-growing participatory design archive / lineage:

  • Our earliest work is based on One Laptop Per Child's original XS design and implementation which arose in January 2007 to be used in many countries, thanks to John Watlington and Daniel Drake.
  • Jerry Vonau greatly cleaned up XS(CE) networking, from approximately 2010 onwards, so that vital new hardware and networking topologies became possible.
  • After the XS Community Edition grassroots team came together during the middle of 2012, using the XSCE name selected by George Hunt, Sridhar Dhanapalan wrote the Design Document in September 2012.
  • Field implementer Tony Anderson expanded on these ideas laying out some Use Cases in October 2012, while many others contributed to a broadening roadmap of features.
  • Internet-in-a-Box (also built by volunteer professional, including Caltech and JPL software engineers) was founded separately by Braddock Gaskill in this same mid-2012 timeframe, in Southern California.
  • David Farning's Activity Central team supported several developers to work on XSCE during the 2013 and 2014 timeframe, including Anish Mangal, Anna Schoolfield and others!
  • German Ruiz at Fundación Zamora Terán expanded support for XSCE in Nicaragua, Columbia, Dominican Republic and Honduras (etc), as the natural successor to OLPC's original XS.
  • The XSCE project embraced the Internet-in-a-Box name and IIAB's underlying OpenStreetMap work increasingly from 2013 onwards, until formally adopting the Internet-in-a-Box name (IIAB) in early 2017.
  • Beginning in 2014, the XSCE project greatly increased its content collaboration with Internet-in-a-Box (hence our new name), with Kiwix.org, and with RACHEL (Remote Area Hotspot for Educational and Learning) -- in each case greatly assisted by Tim Moody.
  • George Hunt and Jerry Vonau made our critical transition to Raspberry Pi (and Ubuntu, and Debian) possible, with foundational OS/infra/networking work in 2016 permitting 2017's breakthrough into so many more communities. Enabling so many grassroots implementations that could never have afforded traditional PC-class servers and associated computer lab facilities/upkeep.

Community history is vital to all seeking to avoid reinventing mistakes of the past, thanks for Everyone's thoughtful input past & present!