User:Samir/USB2VGA UVT-100 dev
Jump to navigation
Jump to search
|
This file has been released into the public domain by its copyright holder, its copyright has expired, or it is ineligible for copyright. This applies worldwide. |
Info
- Tested unit : UVT-100 from MCT, also known as eMagic UTV-100 SXGA adapter
- Windows Driver : http://cs.chipsetcomm.com.tw/support/download/USB2.0_TO_VGA.rar
- Spec : chipset unknown
- lsusb gives : 0711:5001
- Need USB 2.0
The unit is from MCT, the UVT-100 (see http://www.esysmall.com/detail_prod.asp?prod_Id=5544 ) one.
Download
- The alpha source code driver : does compile with a 2.6.22 linux kernel but does not work
Unpack
Go to your /linux source directory. Untar the mcttrigger archive in drivers/usb/misc
Compile
- Add the line :
source "drivers/usb/misc/mcttrigger/Kconfig" in the file linux/drivers/usb/misc/Kconfig
- go to include/linux directory and
cd /usr/src/linux/include/linux ln -s autoconf.h config.h
- Then on the linux source directory,
make menuconfig
and choose Device Support>>USB Support add the USB VGA MCT support as a module
Exit and Save the new configuration
- compile:
cd /usr/src/linux make drivers/usb/misc/mcttrigger/triggerusbvga.ko
Install
If there is no sisusbvga0 device file on /dev, type as root:
mknod /dev/sisusbvga0 c 180 133 mknod /dev/sisusbvga1 c 180 134 mknod /dev/sisusbvga2 c 180 135 mknod /dev/sisusbvga3 c 180 136 mknod /dev/sisusbvga4 c 180 137 mknod /dev/sisusbvga5 c 180 138 mknod /dev/sisusbvga6 c 180 139 mknod /dev/sisusbvga7 c 180 140 chmod 660 /dev/sisusbvga*
insmod the new driver, if your running kernel matches the linux source only, otherwise there will be a magic version issue.
You have to install the sisusb Xorg driver too, package name: xserver-xorg-video-sisusb
Configure the xorg.conf by modifying the device section:
Section "Device"
Identifier "SiS USB2VGA"
Driver "sisusb"
# Please see http://www.winischhofer.at/linuxsisusbvga.shtml for more
# information
EndSection