OLPC Firmware Q2B16

From OLPC
Revision as of 06:11, 13 January 2007 by Xavi (talk | contribs) (categorization)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  This page is monitored by the OLPC team.

OLPC Firmware B2 Pre-production Release Q2B16 - 2007-01-03

This is the firmware for the pre-production test build of the B2 boards.

File:Olpc-Q2B16.rom

MD5: e1c5f7d64e3199a37c2cee075187bf3a olpc-Q2B16.rom


Changes since Q2B15

  • Administrative only. Functionally the same as Q2B15

Installation Caveats

  • If you have a B1 system:
  1. Perform the auto-reinstall procedure at http://wiki.laptop.org/go/Autoreinstallation_image before upgrading to this firmware version
  2. DO NOT use olpcflash to write new firmware images. Doing so will erase the manufacturing data that was added at the factory.
  • After you reflash, you must power cycle by physically removing power from the system. A warm-start or button-induced restart is not sufficient. Please remove both the battery pack and wall adapter for 10 seconds.

ATest users only: If you use olpcflash to write this image, you must use the --brick option.
Example: olpcflash --brick -w image.rom
This will update your EC code.

Known issues

  • Auto-repeat is slow on some USB keyboards
  • NVRAM storage for configuration variables is not yet implemented.
  • JFFS2 does not handle ECC
  • The boot menu is incomplete
  • Directory symlinks have a problem.

ATest -- Infineon RAMs only

This is a special purpose image. Do not use except on A-test boards with Infineon RAMS.

For more info see Upgrading_to_LinuxBIOS#Checking_your_DRAM_type

File:Olpc-Q2B16 CL2.5.rom

MD5: 68aa6813128d94d26b5a0e8aab366c8c olpc-Q2B16_CL2.5.rom