XO1.75 A2 A3 Changes

From OLPC
Revision as of 06:55, 9 January 2011 by Wad (talk | contribs) (→‎eMMC)
Jump to navigation Jump to search

These are the changes planned for the XO-1.75 B1 prototype, from the A2 prototypes.

A2 Electrical Fixes

These changes fix problems in the A2 prototypes:

SD power

These correct a mistake in Embedded Controller pin assignments for the SD power control signals.

  • Depopulate R335 and R345.
  • Remove Q16, and short pins 2 and 3 (marked I and O).
  • Remove Q16, and short pins 2 and 3 (marked I and O).

VMEM stability

This corrects an undercompensation of the +1.5V memory power supply, and also delays the turn-on of the memory termination power supply.

  • Change PR49 to 22K.
  • Change PR52 to 47K.
  • Populate PC37 with 0.1 uF.

eMMC

  • Populate R95 with 10K.
  • Connect BOOT_DEV_SEL to CN21.10
  • Use +3.3V_SD1 to power the eMMC instead of +3.3V_NAND

A2 Layout Fixes

Planned Feature Changes