XO Motherboard Repair

From OLPC
Revision as of 13:33, 23 February 2009 by Mchua (talk | contribs)
Jump to navigation Jump to search
  This page is monitored by the OLPC team.
  english | español HowTo [ID# 196196]  +/-  

This is the motherboard of a production XO laptop, annotated for repair:

XO Repair Motherboard.png

This page is part of the troubleshooting guide. A more general graphic is also available.

An EPS version of this image is available, as is the photo of the bare motherboard.

Common motherboard problems

Original list by Ian Daniher of OLPCinci.'

When a motherboard goes bad it's usually because...

  • One of the screen / back light connectors came off due to a botched repair.
  • A trace or chip on the motherboard was physically damaged for one or another reason. Usually these are physically observable.
  • I have seen one example of an XO 'dead' because of power problems - it appeared fine but had apparently been left plugged in... somewhere during some electrical catastrophe. It would not turn on.

Past that, the motherboards are pretty solid. Other oddballs:

  • I've seen the wires that connect the motherboard to the battery go bad once.
  • I have seen a battery randomly(read non-reproducibly) kill the EC, mandating a power system reboot.