XO Stick/Bootloader

From OLPC
< XO Stick
Revision as of 05:29, 4 November 2012 by Tonyforster (talk | contribs)
Jump to navigation Jump to search

An Arduino can be used as a programmer. This is based on [1]

Burning-bootloader-pinout.jpg

Pinout, using a Duemilanove as the programmer and XO Stick as the target

Burn-bootloader.jpg

Burning the bootloader with an Arduino

Download the ArduinoISP program to the Arduino which you are using as the programmer, then select your target board type under tools/Board (at the moment 861 is not supported) then Tools/Burn Bootloader

(because the 861 is not supported I get avrdude: Expected signature for ... is ... Double check chip, or use -F to override this check.)