Tests/Record

Start the record activity

Justification: HIG for startup process; self for remaining

Actions:

1. Start the record activity by pressing the corresponding button on the keyboard.

Verify:

• A Record icon is added to the activity ring on the home screen.
• The Record icon throbs to indicate the activity starting up.
• That the record activity starts properly.
• That there is a real-time display of the camera's input being shown.
• If you are using a B3 or later:
• That the LED above the camera is on.
• That the LED above the microphone is on.

Take a photo

Justification: self

Actions:

1. Take a photo by clicking the eye icon.

Verify:

• That a thumbnail of your photo is shown along the bottom edge of the screen.
• That there is a real-time display of the camera's input being shown.

View the photo

Justification: self

Actions:

1. Click on the thumbnail of the new photo.
2. Wait a few seconds.
3. Move the mouse over the picture.
4. Click the maximize/restore button.(top right of picture)
5. Click the maximize/restore button again.

Verify:

• That your photo is displayed properly.
• To start with, the real time display is shown in the lower left corner, the i is in the bottom right, and the maximize/restore button is in the top right.
• The extra buttons and real time display go away after a few seconds of inaction.
• Moving over the photo brings the extra buttons and real time display back.
• Clicking the maximize/restore button toggles between full screen and partial screen views.

Check photo storage

Justification: HIG

Actions:

1. Switch to the journal.

Verify:

• That an entry has been created for your record activity session.
• That a thumbnail for your new photo is visible in that entry.

Switch to video mode

Justification: self

Actions:

1. Switch back to the record activity.
2. Switch to video recording mode by clicking on the Camera tab and then clicking the camcorder button.

Verify:

• That any thumbnails of your still photos are hidden.
• That there is a real-time display of the camera's input being shown.

Begin video capture

Justification: self

Actions:

1. Begin capturing video by clicking the eye icon.

Verify:

• That the eye icon turns red.

End video capture

Actions:

1. End the video capture by clicking the eye icon again.

Verify:

• That the microphone LED turns off.
• That the eye icon turns white again.
• That a thumbnail of your video is shown along the bottom edge of the screen.

Play the video

Justification: self

Actions:

1. Click on the thumbnail of the new video.

Verify:

• That it plays correctly, including sound.

Check video storage

Justification: HIG

Actions:

1. Switch to the journal.

Verify:

• That, under the same journal entry as the photo you took earlier, a thumbnail for your new video is also present.

Delete the video

Justification: self

Actions:

1. Switch back to the record activity.
2. Delete your video by clicking the small (x) on the thumbnail.

Verify:

• That the video is removed.

Delete the photo

Justification: self

Actions:

1. Switch back to still-photo mode by clicking on the still camera icon.
2. Delete your photo by clicking the small (x) on the thumbnail.

Verify:

• That the photo is removed.

Check deletion

Justification: self

Actions:

1. Switch to the journal.

Verify:

• That the entry does not contain the photo you took.
• That the entry does not contain the video you took.

Is this correct?

Quit the activity

Justification: self

Actions:

1. Switch back to the record activity.
2. Quit the record activity by pressing the (X) key on your keyboard.

Verify:

• That the activity closes properly, and that the LEDs for the camera and the microphone are turned off.