User:Samir

From OLPC
Revision as of 21:14, 2 December 2007 by Samir (talk | contribs) (New page: Content on this page put into the '''PUBLIC DOMAIN''' I hereby put all this information into the public domain, which means that there is no right reserved. = Notes on the XO B4-10 = B...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Content on this page put into the PUBLIC DOMAIN

I hereby put all this information into the public domain, which means that there is no right reserved.

Notes on the XO B4-10

B4-10 Linux-2.6.21-20070614 Firmware : PQ2C18 Build : 406.14 variant devel jffs2

Opening the XO is puzzling :-) I would say that the first pedagogical activity of the XO is opening it... You have to understand and to watch carefully the XO.

With this build, close an application is not intuitive. Corrected on next build. I suggest anyone to first upgrade both the firmware and the build image. For instance, the first time I tried the XO, I thought that there was a problem with the battery... Because the battery discharged very quickly. In fact, the problem was that this firmware does not control the battery charging very well.


Linux-2.6.22-20070801 Q2C26 build 542

I come to this problem, called the "XO Activation error"... In the wiki auto installation, I miss this part, which was important : reboot and push in the same time the 'check' and 'X' button (from the gamepad). Then the problem was gone

The battery seems to last around two hours... there is still a problem, the indication are not accurate in the sugar interface.

I've got a very weird problem with my home access point (Inventel www.porciello.com/inventel/astuces.htm) The XO cannot connect to this ap out of the box. There is a functionnality called "association mode", a kind of mac filtering. When you push a button on the ap, filtering is disactivate and all wireless computer can connect to the ap. Their MAC address are stored into the ap memory, and when the "association mode" is over, new wireless computer cannot connect anymore. I tested the XO to other APs, and there is no problem... But with this ap, it can connect during the "association mode", and when I reboot the XO, it cannot connect anymore although I can see that the MAC address is registred into the APs.

-- Next a stable build, grab http://download.laptop.org/xo-1/os/official/649/jffs2/ bleeding edge is http://xs-dev.laptop.org/~cscott/olpc/streams/joyride/latest/devel_jffs2/