Battery Charging

From OLPC
Revision as of 15:56, 30 March 2007 by Xavi (talk | contribs) (categorization & cosmetics)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
  This page is monitored by the OLPC team.

Battery Charging

Types of Batteries

OLPC is using two battery chemistries: NiMH, and LiFePo batteries. The LiFePo batteries allow charging at higher temperatures. The NiMH batteries cannot be charged above about 45 degrees C.

Recovery of Dead Batteries

BTest-1 Systems

BTest-2 Systems

Long Term Storage

Battery-2.jpg

If you plan to store a system for many weeks or months, your best strategy is to fully charge the battery and remove the battery from the laptop. Batteries naturally lose charge with time (how fast depends on the battery and its chemistry), and the embedded controller in the laptop, while sipping tiny amounts of power in its low power state, will drain the battery faster. Batteries are also known to leak.

This strategy is true for all battery powered equipment.

As you can see above, letting a battery drain all the way will cause problems when recharging, how severe depends on the circumstances.