Hardware specification/lang-ja

  このページは、OLPCチームによってチェックされています。

This is an on-going translation

ラップトップ　ハードウェア

XOラップトップはOne Laptop Per Childの中心です。2年の開発により量産が始まりつつあり、何千かのベータテスト （B2)ユニットが開発者によって使われ、参加国の学校でテストされています。ラップトップのデザインには技術の進歩に 追従するため最終のマイナーなアップデートが行われました。

仕様

• グラフィックコントローラ: Integrated with Geode CPU; unified memory architecture

Physical dimensions:

• 寸法: 242mm × 228mm × 30mm (大体のサイズ、変わる可能性あり)
• 重量: Less than 1.5 kg (本体のみ — 変わる可能性あり)
• Configuration: Convertible laptop with pivoting, リバーシブル　ディスプレイ; 防塵および防滴 system enclosure

Core electronics:

• CPU: AMD Geode LX-700@0.8W (datasheet)
• CPUクロック速度: 433 MHz
• 互換性: Athlon instruction set (MMX and 3DNow! Enhanced含む) with additional Geode-specific instructions
• North Bridge: PCI and Memory Interface integrated with Geode CPUhttp://www.amd.com/us-en/ConnectivitySolutions/ProductInformation/0,,50_2330_9863_13022%5E13073,00.html
• グラフィックコントローラ: Integrated with Geode CPU, using a unified memory architecture
• South Bridge: AMD CS5536 (datasheet)
• DRAM memory: 256 MiB dynamic RAM
  • データ転送レート: Dual – DDR333 – 166 MHz
• BIOS: 1024 KB SPI-interface flash ROM; LinuxBIOS open-source BIOS; Open Firmware bootloader
• Mass storage: 1024 MiB SLC NAND flash, 高速フラッシュコントローラ
• 内蔵ドライブ: 回転機構を持つデバイスはありません
• 内蔵コントローラ: ENE KB3700: File:KB3700-ds-01.pdf

Prototype-A Motherboard

ディスプレイ:

• 液晶ディスプレイ: 7.5” デュアルモード TFT ディスプレイ
• Viewing area: 152.4 mm × 114.3 mm
• 解像度: 1200 (H) × 900 (V) 解像度 (200 dpi)
• モノクロディスプレイ: 高解像度, reflective monochrome mode
• カラーディスプレイ: 800 (H) x 600 (V) or greater transmissive color mode
• 消費電力: バックライトオフ時　0.1 ワット; バックライトオン時　0.2-1.0 ワット
• The DCON - Display Controller chip with memory that enables the display to remain live with the processor suspended. The display and this chip are the basis of our extremely low power architecture. The machine is usable and relaying mesh networking traffic while the CPU and much of the motherboard is regularly turned off. The display controller chip also enables deswizzling and anti-aliasing in color mode. You can examine this photograph of the display (it looks even nicer in person; photographing a display is remarkably difficult).

Note: web browser images are currently scaled up so that an image of very roughly [800x600] fills up the browser window.

eToys (Squeak)running on the OLPC display

Integrated peripherals:

• キーボード: 70+ キー, 1.2mm ストローク; sealed rubber-membrane key-switch assembly
  • Keyboard Layouts
  • レイアウト画像 (for B3)- US International, Thai, Arabic, Spanish, Brazilian Portuguese, Nigeria, Urdu, French
• カーソルキー: five-key cursor-control pad; 4方向キー＋エンターキー
• タッチパッド: アルプス電気 Dual capacitance/resistive touchpad; supports written-input mode
• オーディオ: Analog Devices AD1888, AC97-compatible audio codec; ステレオ, with dual internal speakers; monophonic, with internal microphone and using the Analog Devices SSM2302 for audio amplification

Keyboard detail

• Wireless: Marvell Libertas 88W8388+88W8015, 802.11b/g 互換; dual adjustable, rotating coaxial antennas; supports diversity reception
• Status indicators: 電源, バッテリ, WiFi; visible lid open or closed
• ビデオカメラ: 640x480 解像度, 30FPS, Omnivision OV7670. The camera and device driver support disabling AGC and automatic color balancing, to enable its use as a photometric sensor for educational applications.
• Independent and undefeatable by software display of microphone and camera recording status

外部コネクタ:

• 電源: 2-pin DC-input, 10 to 20 V usable input. Input can safely handle -40 to 39 V. input. Exceeding this range will likely blow a one-time fuse.
• ライン出力: Standard 3.5mm 3-pin switched stereo audio jack
• マイク: Standard 3.5mm 2-pin switched mono microphone jack; selectable input mode:
  • Sensor, DC w. 2.5 V (3K ohm impedance) bias voltage for switches, resistive sensors, etc.
  • Sensor, DC w. no bias voltage for measuring voltages (0 - 3 V)
  • 外部マイク, AC w. bias voltage
• Expansion: 3 Type-A USB-2.0 コネクタ; MMC/SD カードスロット
• 最大電力: 1 A (トータル)

Connectors

バッテリ:

• Fully-enclosed “hard” case; user removable
• Pack type: 4 Cells, 6V series configuration
• Two chemistries:
  • NIMH, with a capacity of 16.5 Watt-hours
  • LiFeP, with a capacity of 22 Watt-hours
• Electronics integrated with pack provide:
  • Identification
  • Battery charge and capacity information
  • Thermal and over-current sensors along with cutoff switch to protect battery
• Cycle life: 最低 2,000回の充電／放電　(to 50% capacity of new, IIRC).
• Power Management will be critical

Battery

BIOS/loader:

• Open Firmware が使われています。including hardware initialization and fast resume.

Environmental specifications:

• Temperature: somewhere in between typical laptop requirements and Mil spec; exact values have not been settled
• Humidity: Similar attitude to temperature. When closed, the unit should seal well enough that children walking to and from school need not fear rainstorms or dust.
• Altitude: -15m to 3048m (14.7 to 10.1 psia) (operating), -15m to 12192m (14.7 to 4.4 psia) (non-operating
• Shock: 125g, 2ms, half-sine (operating) 200g, 2ms, half-sine (non-operating)
• Random vibration: 0.75g zero-to-peak, 10Hz to 500Hz, 0.25 oct/min sweep rate (operating); 1.5g zero-to-peak, 10Hz to 500Hz, 0.5 oct/min sweep rate (nonoperating)
• 2mm plastic walls (1.3mm is typical for most systems).

Regulatory requirements:

• The usual US and EU EMI/EMC requirements will be met.
• The laptop and all OLPC-supplied accessories will be fully UL and is RoHS compliant.

ラップトップ開発スケジュール

The XO laptop hardware development schedule has two more test unit builds (Beta Test 3 and Beta Test 4), before a final test build (C Test 1) on the final production line and mass production. The Beta Test 3 build scheduled for early May will be the first one providing the processor and memory capabilities of the production version.

Pre-production Test Systems (CTest-1, or C1)

This build is a very small number (200 or so) of laptops produced as a test of the manufacturing process on the main production line, and should happen in early fall 2007. A C1 laptop is hopefully identical to a production unit in all aspects...

ベータテスト 4 Systems (BTest-4, or B4)

This build, scheduled for the middle of summer 2007, is the final chance to fix hardware and mechanical problems that were detected in the Beta Test 3 build of the XO. Only a small number (200 or so) of these will be built for testing, as the injection molds for the plastic case have to be taken offline and duplicated to prepare for mass production (the Beta Test mold set will be retired after duplication).

このビルドではラップトップに新しい機能は加えません。This build is planned merely to test solutions to problems detected in the BTest-3 laptops.

ベータテスト 3 Systems (BTest-3, or B3)

This build, scheduled for May 2007, is the first to use an updated design for the laptop. Noticeable improvements over BTest-2 include:

• 高速、低消費電力プロセッサにしました: the Geode LX-700
  • 64 KB I/64 KB D of L1 Cache, 128 KB of L2 Cache (vs. 32 KB of L1 cache)
  • プロセッサとメモリのクロックを速くしました (433/333 vs. 366/266)
  • 1.5 W typ. vs. 3 W typ.
  • Much better graphics processor, including support for rotated blits and depth conversion
• メモリの増量: 256 MB of SDRAM (vs. 128 MB)
• A new hinge design allows greater tilt of the screen
• ケースのデザインが改良されました (addressing strength and water resistance)

A very small number of BTest-3 units (around a hundred) will be built, all destined for hardware and low level software development.

ベータテスト 2 Systems (BTest-2, or B2)

Approximately 2500 systems were built by Quanta and are being distributed. These are fully functional machines with CaFE ASICs, and reflect some, but not all of the learning and improvements from testing of BTest-1. Much more information about the BTest-2 systems can be found in the BTest-2 Release Notes. Some of the details of the hardware design are to support the OLPC Human Interface Guidelines.

BTest-2 systems are almost identical visually with BTest-1. BTest-3 will have more substantial physical differences. An easy way to tell the difference between BTest-1 and BTest-2 is that BTest-1 keyboards have white lettering, and BTest-2 has black lettering.

ベータテスト 1 Systems (BTest-1)

Approximately 875 systems were built by Quanta and were distributed. These are fully functional machines, but built before the rigorous testing that will now take place. Much more information about the BTest-1 systems can be found in the BTest-1 Release Notes.

Pre-BTest boards

A small number of pre-BTest boards were built in preparation for building complete BTest systems. Developer information about B-test boards are here.

アルファテスト Prototype Electronics

Power up of the first OLPC electronics prototype boards occurred April 15, 2006. Power and ground testing continued over the weekend, and formal debug and BIOS bring up started Monday, April 17, 2006 at Quanta Computer's labs in Taipei, Taiwan. By Wednesday, April 19, Linux was booting on the first generation prototypes.

Photographs:

• Component side OLPC circuit board
• Back side of the OLPC circuit board
• Picture of Linux running with circuit board in the lab
• Picture of the screen of Linux running on the OLPC circuit board; fittingly, it shows a Chinese desktop

See also

Hardware

Formerly part of this page:

School Server Hardware

While the laptop is rightfully at the center of OLPC, a valuable peripheral is the school server. OLPC will be building and distributing school servers along with the laptops, to extend the storage and computation provided by each laptop, as well as providing a local library and a mesh portal to the Internet.

Unlike the laptop, the school server is more of a collection of services than a hardware platform. In a manner identical to the laptop, OLPC will collaborate with manufacturing partners to provide a cost-efficient hardware platform for running the recommended software. Unlike the laptop, the manufacturing collaboration will not be exclusive. Individual countries will be free (even encouraged) to design and manufacture their own school servers running derivatives of the OLPC school server software.

XS

This will be the school server built for OLPC by Quanta. It is still in the very early stages of design, but should reach early production volumes in late fall. See the specification.

XSX

This is a prototype school server, built for early school trials in country. It will be integrated from off-the-shelf components, and will be overpowered compared to a production school server in order to simplify early demands for system software. See the specification and the implementation.