Especificaciones Hardware XO-1.5: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
{{Translation | lang = es | source = XO-1.5 | version = 219819}}
{{Translation | lang = es | source = Hardware_specification_1.5 | version = 219819}}
{{Ongoing Translation}}
{{Ongoing Translation}}



Revision as of 12:16, 9 November 2009

  Traducción de Hardware_specification_1.5 original  
  english | español   +/- cambios  
This is an on-going translation

La actualización del hardware XO-1.5

La laptop XO-1.5 es el foco central de One Laptop Per Child en el 2009.

Una actualización del XO-1 está en marcha. En nuestro esfuerzo contínuo para manterner un precio bajo, OLPC está actualizando el hardware para sacar ventaja de las últimas tecnologías en componentes. Ésta actualización (Generación 1.5) es un proyecto separado de Gen 2.0, y va a continuar usando el mismo diseño industrial y baterías que la Gen 1. El objetivo del diseño es proveer una actualización general al sistema dentro del mismo DI (diseño industrial) y apariencia externa.

En términos generales, la meta es mantener el precio y el bajo consumo eléctrico del Gen 1 XO-1; haciendo al mismo tiempo al procesador más activamente "haragán" (ahorrando batería). Es muy probable que alcancemos las metas.

También esperamos que las máquinas Gen 1.5 se entreguen con un nuevo OS: new software release, basado en Fedora 11, e incluyendo tanto Sugar como GNOME.

Especificaciones

Drawing75c1.jpg
Gráfico reducido de un XO - haga click para agrandar

La especificación definitiva del XO-1.5 no está disponible aún, sin embargo, en muchos sentidos es comparable al XO-1 (pdf).

Dimensiones físicas

  • Dimensiones aproximadas: 242mm × 228mm × 32mm (vea la imagen a la derecha para dimensiones detalladas)
  • Peso aproximado:
    • Laptop XO con batería LiFePO4: 1.45KG (~3.20lbs); NO CONFIRMADO
    • Laptop XO con batería NiMH: 1.58KG (~3.48lbs); NO CONFIRMADO
  • Configuración: Laptop convertible con pantalla pivotante y reversible; carcasa del sistema resistente a suciedad y humedad; sin ventiladores ni ranuras de ventilación.

Electrónica principal

  • Una foto de la Placa madre del XO 1.5 está disponible con notas.
  • CPU: Via C7-M Ultra Low Voltage x86-compatible processor con cache L2 de 128KB ;
    • No hay datasheet disponible aún. Todos los datasheets de los chips estarán disponibles públicamente cuando la laptop esté en producción. En éste momento están aún siendo escritos y corregidos para publicación.
  • CPU clock speed: 400 MHz (1.5 W) a 1GHz (5 W), variable. La reloj se ralenta automáticamente cuando es necesario para mantener la CPU dentro de los parámetros termales. Éstos cambios de velocidad suceden muy rápido, lo mismo que la caída de voltaje del procesador (0.728V en C3/C4, comparado con 0.798V en C0).
  • El instruction-set es compatible con Intel-compatible (incluyendo MMX, SSE, SSE2 & SSE3)
  • Chips de compañía: Via VX855 provee la interfaz de memoria, motor gráfico 3D, decodificador de vídeo HD, USB, SDIO y otras interfaces de sistema y gestión.
  • Embedded controller: ENE KB3700 or ENE KB3700B;
  • Memoria DRAM : 1 GiB dynamic RAM; data rate: DDR2 SDRAM;
  • BIOS: 1 MiB SPI-interface flash ROM;
  • Usamos Open Firmware para cargar el sistema operativo;
  • Almacenamiento: 4 GiB NAND flash en una tarjeta internamicroSD card (no reeplazable por el usuario, hay que abrir la unidad con un destornillador). También hay una ranura para tarjetas SD, como en el XO-1.
  • Discos: sin discos.
Prototype Motherboard

Display

Main article: Display
  • Liquid-crystal display: 7.5” dual-mode TFT display;
  • Viewing area: 152.4 mm × 114.3 mm;
  • Two "modes" depending on lighting conditions:
(1) Grayscale (B&W) reflective mode: for outdoor use—sunlight-readable; primarily lit from the front by ambient light; high-resolution (200 DPI), 1200(H) × 900(V) grayscale pixels; power consumption 0.1–0.2Watts;
(2) Color, backlight mode: for indoor use; primarily lit from behind by the LED backlight; built in sub-pixel sampling of the displayed color information results in a perceived resolution of approximately 984(H) × 738(V); power consumption 0.2–1.0Watts;
  • The display-controller chip (DCON) with memory that enables the display to remain live with the processor suspended. The DCON also formats data for the display.
  • This Liquid-crystal display is the basis of our extremely low power architecture. The XO is usable while the CPU and much of the motherboard is regularly turned off (and on) so quickly that it's imperceptible to the user. Huge power savings can perhaps be harvested in this way (e.g. by turning stuff on the motherboard off when it's not being used (if even for a few seconds), while keeping the display on).
Note: web browser images are currently scaled up so that an image of very roughly [800 × 600] fills up the browser window.

Gen 1.5 will continue with the existing display, although OLPC is working with PixelQi to try to improve the brightness and efficiency of the screen.

Integrated peripherals

Keyboard detail
  • Camera: integrated color video camera; 640 x 480 resolution at 30 FPS; independent (and undefeatable by software) display of microphone and camera recording status; the camera and device driver support disabling AGC and automatic color balancing, to enable its use as a photometric sensor for educational applications;
  • Wireless Networking: Integrated 802.11b/g (2.4GHz) interface; dual adjustable, rotating antennas support diversity reception;
    • Marvell Libertas wireless chip, 88W8686, with SDIO interface, on removable module; remains powered while the laptop suspends, waking the laptop if a packet addressed to it arrives. It is likely that early production models will not directly support 802.11s (i.e. forwarding mesh packets while the interface is asleep), but we are working with Marvell on several different 802.11s solutions.
  • Status indicators: Power, battery, and WiFi (2), visible with lid open or closed; Microphone In-Use, and Camera In-Use, visible when lid is open.

External connectors

  • DC power: 6mm (1.65mm center pin) connector; 11 to 18 V input usable, –32 to +40V input tolerated; power draw limited to 25 W; - see power connector dimensions at Battery and power.
  • Headphone output: standard 3.5mm 3-pin switched stereo audio jack;
  • Microphone input: standard 3.5mm 3-pin switched stereo microphone jack; selectable 2V DC bias; selectable sensor-input mode (DC or AC coupled);
  • USB: Three Type-A USB 2.0 connectors; Up to 1A power supplied (total);
  • Flash Expansion: SD Card slot.
Connectors

Battery

  • Pack type: 2 or 4 cells LiFePO4; or 5 cells NiMH, approx. 6V series configuration (subject to change);
  • Capacity: 16.5 Watt-hours (NIMH), 22 Watt-hours (LiFeP);
  • Fully-enclosed “hard” case; user removable;
  • Electronics integrated with the pack provide:
    • Identification;
    • Battery charge and capacity monitoring chip (Maxim DS2756 data sheet);
    • Thermal and over-current sensors along with cutoff switch to protect battery;
  • Minimum 2,000 charge/discharge cycles (to 50% capacity of new).
  • Power Management will be critical

See Laptop Batteries or more information.

Battery

BIOS/loader

  • Open Firmware (including hardware initialization and fast resume).
  • Panasonic ML1220 battery

Environmental specifications

  • Temperature: UL certification planned to 45C in Q32007, pending 50C certification in mid-2008; UNREVIEWED
  • Humidity: UL certification planned to IP42 (perhaps higher) when closed, the unit should seal well enough that children walking to and from school need not fear rainstorms and dust; UNREVIEWED
  • Maximum altitude: –15m to 3048m (14.7 to 10.1 PSIA) (operating), –15m to 12192m (14.7 to 4.4 PSIA) (non-operating); UNREVIEWED
  • Shock 125g, 2ms, half-sine (operating) 200g, 2ms, half-sine (non-operating); UNREVIEWED
  • Random vibration: 0.75g zero-to-peak, 10Hz to 500Hz, 0.25 oct/min sweep rate (operating); 1.5g zero-to-peak, 10Hz to 500Hz, 0.5 oct/min sweep rate (nonoperating); UNREVIEWED
  • 2-3mm plastic walls (1.3mm is typical for most systems).

Regulatory requirements

  • The usual US and EU EMI/EMC (electromagnetic-interference and electromagnetic-compatibility) requirements will be met;
  • The laptop is intended to meet IEC 60950-1, EN 60950-1, and CSA/UL 60950-1 specifications. It will also comply with UL 1310 and UL 498. In order to guarantee the safety of children using the laptop, it passes ASTM F 963;
  • The external power adapter complies with IEC, EN, and CSA/UL 60950-1;
  • The removable battery pack complies with IEC, EN, and CSA/UL 60950-1 and UL 2054;
  • RoHS (Restriction of Hazardous Substances Directive – EU) compliant.

Laptop Development Schedule

Early versions of the hardware (bare board) should be available for driver development at the end of May 2009; see XO1.5 Bringup and XO 1.5 A1. A larger number of prototype laptops (several hundred) for software development and testing will become available around the end of August 2009. The OLPC contributors program will be the preferred way of requesting a Gen 1.5 machine for testing your software for compatibility or development. We hope to use the contributors program to ensure Gen 1.5 support for the wide variety of application and OS solutions created for Gen 1.0.

Serial Adapter

Serialadapter.jpg

In order to conserve parts/space, while the motherboard does provide a serial port for debugging, it does not provide voltage translators to fully implement the RS-232 protocol. Thus a 3.3V TTL to RS-232 (or USB) Adapter is needed.


See also