Wireless access point compatibility
| Manufacturer | Model | Firmware | Tested | Notes |
|---|---|---|---|---|
| Linksys | WRT54G | 4.21.1 1/20/2007 | Yes | |
| Linksys | WRT54GL | OpenWRT WhiteRussian (RC4) | Yes | tested using no security (MAC based access control) on channel 3 |
| DD-Wrt | DD-WRT | v23 | Yes | |
| Actiontec | MI424WR | Unknown | Yes | |
| D-Link | DIR-615 | 2.20 | Yes | worked with WPA2 (personal) and the Wpa.sh script |
| 2Wire | 3800HGV-B Gateway | 5.29.105.76 | Yes | ATT Uverse supplied, changed WPA to WEP-open and assigned to channel 8 as opposed to Automatic |
| Airlink 101 | AR525W | v1.0.50 | Yes | Used WEP-Open with 128-bit hex key password |
| Apple | AirPort Express | 6.3 | Yes | Manually configured WPA/WPA2 Personal with password. Specify 2 when prompted by the shell script. |
| TRENDnet | TEW432BRP_c1 | v2.00.0012 | WEP | Does not show up in neighborhood until you attempt to connect to another WAP
(e.g. at a neighbors house). The Trendnet then immediately shows up, and you can connect to it instead. Is on channel 9, maybe 1,6,11 would work better. |
