User:Holt/XS Community Edition/0.2/Implementing
< User:Holt | XS Community Edition | 0.2
Contents
- 1 Initial Setup
- 2 Dynamic Host Configuration Protocol (dhcpd)
- 3 Internet Domain Name Server (named)
- 4 Network Address Translation/NAT (iptables)
- 5 XMPP server (ejabberd)
- 6 IDMGR
- 7 Web server (apache)=
- 8 Proxy server and web cache (squid)
- 9 OLPC-update (rsync)
- 10 Activity update (activity updater)
- 11 Virtual Private Network (open vpn)
Initial Setup
- Use "ifconfig" to determine the ip address of the XS.
Take note of its eth0-ip-address = WAN-ip.
If you've inserted the USB Ethernet Adapter above (serving the LAN/Intranet) also take note of the school server's eth1-ip-address = LAN-ip = 172.18.96.1 - If you inserted the USB Ethernet Adapter above, configure its own Wifi Access Point (AP) to properly serve other LAN/Intranet client XOs. (If the Wifi AP is a router, DO NOT plug into its "WAN" port -- instead use any of its LAN/normal ports. And be sure to enable the AP's "bridge mode" or similar, or specifically disable the AP's own DHCP)