Tests/Paint: Difference between revisions

From OLPC
Jump to navigation Jump to search
(New page: Category: Test Plans Notes below each section are just my observations and/or suggestions that I had as I was working with a particular function in Paint. Things marked with asterisks ...)
 
(fix cat)
 
(26 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[Category: Test Plans]]
[[Category: Test Plans]]

Notes below each section are just my observations and/or suggestions that I had as I was working with a particular function in Paint. Things marked with asterisks are where either A) I was not sure whether this was a bug or an intended feature, but the effect produced was unconventional or awkward regardless or B) Where it might not matter whether these conditions are actually met (such as default settings). All the justification is self for now because the entry on the Wiki for Paint seems pretty outdated...in fact, it's referencing a Draw program that bears very little resemblance to the Paint in terms of features.
NOTE: Paint has been replaced by [[Drawing Activity|Oficina]] in the latest builds. I will try to make a test plan for Oficina asap.

This test plan is meant to simulate a user drawing a turtle, then using other functions like copy/paste and fill to flesh out his or her drawing.


==Start the Paint activity==
==Start the Paint activity==
Line 12: Line 15:
* That the icon pulses to show that it is opening.
* That the icon pulses to show that it is opening.
* That the Paint program opens properly and displays the main canvas and toolbars.
* That the Paint program opens properly and displays the main canvas and toolbars.
* That the starting color is set to black.***
* That the starting draw mode is set to Paint.***


==Start drawing==
==Select a brush and draw something==
Justification: Self
Justification: Self


Actions:
Actions:
# Click on the large circular brush icon in the left margin.
# Click on the large circular brush icon in the left margin.
# Click on the dark green color in the left taskbar and draw a large circle.
# Draw any shape you want on the screen.
# Click on the light green color and make four smaller circles around the large circle as limbs.
# Switch to some of the other brushes and draw with them as well.
Verify:
Verify:
* That your shape appears on the screen properly.
* That your shapes appear on the screen properly.
* That the currently selected brush icon becomes highlighted with a white circle.
* That the currently selected brush icon becomes highlighted with a white circle, and that the color indicator on the left updates to indicate your color.
* That an outline of the shape of your brush appears under your cursor. ***
* That an outline of the shape of your brush appears under your cursor. ***


Notes: When using a circular brush, the outline of a square, rather than a circle, appears under the user's cursor. It's not clear whether this is intentional - normally, you'd expect a circular outline outline that matches the actual shape of the brush. This applies to all non-square brushes.
Notes: When using a circular brush, the outline of a square, rather than a circle, appears under the user's cursor. It's not clear whether this is intentional - normally, you'd expect a circular outline outline that matches the actual shape of the brush. This applies to all non-square brushes.

==Change to one of the 20 preset colors==
Justification: Self

Actions:
# Click on one of the 20 preset color circles in the lefthand margin.
# Draw any shape you want on the screen.
Verify:
* That the rounded rectangle above the 20 color circles changes to the color you just chose.
* That the shape you drew is in the color you just chose.


==Use the color editor==
==Use the color editor==
Line 44: Line 35:
Actions:
Actions:
# Open the color editor by clicking the rounded rectangle above the color circles.
# Open the color editor by clicking the rounded rectangle above the color circles.
# Click a point inside the color triangle to change the color. Try clicking a point on the surrounding color wheel as well.
# Click the yellow portion of the surrounding wheel, then click a point inside the color triangle to select yellow gray.
# Click the Hue field and adjust its value using the arrows, and then by typing in a new value in the Hue field.
# Do the same for the Saturation field, the Value field, and the Red, Green and Blue fields.
# Close the color editor by clicking the "OK" button.
# Close the color editor by clicking the "OK" button.
# Draw something on the canvas.
# Draw some lines on the turtle's back to indicate plates.
Verify:
Verify:
* That the window opens properly.
* That the window opens properly, and that the color values in the color triangle match the values of the currently selected color.
* That the color values in the color triangle match the values of the currently selected color.
* That the color values in the rectangle at the lower left match the values of the currently selected color.
* That the color values in the rectangle at the lower left match the values of the currently selected color.
* That the color triangle can be clicked normally and alters the color accordingly.
* That the color triangle can be clicked normally and alters the color accordingly.
* That the color of the lines you drew matches the color you selected with the color editor.
* That the arrow buttons alter their respective values properly, and that typing in fields changes their respective values properly and changes the cursor appropriately.
* That the hue, saturation, value, and R/G/B values, when altered, will change the selected color appropriately.
* That the color of the shape you draw matches the color you selected with the color editor.


Notes: Minor point, but color is spelled "colour" in the color editor.
Notes: Minor point, but color is spelled "colour" in the color editor.
Line 64: Line 50:


Actions:
Actions:
# Open the color editor.
# Open the color editor and click the eyedropper tool, below the color wheel and next to the two rectangles.
# Click the eyedropper tool, below the color wheel and next to the two rectangles.
# Click one of the turtle's limbs to select light green.
# Close the color editor by clicking the "OK" button and draw a head on the turtle with the large circular brush.
# Click a color anywhere on your canvas that is different from the current color.
# Close the color editor by clicking the "OK" button.
# Draw something on the canvas.
Verify:
Verify:
* That the eyedropper icon becomes highlighted with a white circle.
* That the eyedropper icon becomes highlighted with a white circle.
* That the normal cursor properly changes to the eyedropper cursor.
* That the normal cursor properly changes to the eyedropper cursor.
* That the color properly changes to the color that you just clicked.
* That the color properly changes to the color that you just clicked, and that the color of what you drew matches the color you selected with the eyedropper.
* That the color of what you drew matches the color you selected with the eyedropper.


==Copy/paste a selection==
==Give your color a name using the color editor==
Justification: Self
Justification: Self


Actions:
Actions:
# Click the "Make Selection" button on the upper toolbar.
# Open the color editor.
# Click anywhere in the color triangle to choose a color.
# Click and drag around the turtle
# Click in the "Color name" field and type any name you want.
# Click the "Copy" button on the upper toolbar.
# Close the color editor and then open it again.
# Click the "Paste" button on the upper toolbar.
# Click your new turtle and drag it to the left of the original turtle.
# Press Enter. ***

Verify:
Verify:
* That the "Color name" field allows you to type in it, and that the cursor changes accordingly when you mouse over it.
* That the "Make Selection" button becomes highlighted grey when you mouse over it and white when you click it.
* That the color name changes when you change your color.
* That the cursor changes to a 2-way arrow while dealing with a red-bordered selection.
* That a red-bordered, dotted line box appears according to where you pointed and dragged.
* That the color editor remembers the name that you give it when you reopen it.
* That the cursor changes to a crosshair while resizing a selection or dealing with a blue-bordered selection.
* That the pasted selection appears properly with a blue selection box around it, and is movable.
* That the pasted selection sticks when you press Enter.


==Use the Flood Fill function==
Notes: The purpose of the color name function is unclear. You aren't able to save colors, and the name always reverts to hexadecimal once you reopen the color editor, even though the tooltip seems to suggest that you can name your colors normal names, like "Orange." It seems like the only use of "color name" is to alter the color value via hexadecimal, but the tooltip (and function name) makes it seem as though it is descriptive.
Justification: Self

==Cancel a color change that was made in the color editor==
Justification: Self.


Actions:
Actions:
# Click the "Flood Fill" button on the upper toolbar.
# Open the color editor.
# Change the color.
# Choose light blue as your color.
# Close the color editor by clicking the "Cancel" button.
# Click the white background to fill the background with blue, indicating water.
Verify:
Verify:
* That the appropriate area of the canvas is filled with the correct color.
* That the window closes properly.
* That the color reverts to what it was before it was edited.
* That none of the bordering, different-colored shapes are affected or corrupted by the fill.


==Use Paste Text==
==Add a caption using Paste Text==
Justification: Self
Justification: Self


Actions:
Actions:
# Click on the Paste Text icon on the top bar.
# Click on the Paste Text icon on the top bar.
# Click on a different font. Use the scrollbar to scroll through fonts.
# Choose a different font, style and size.
# Click on a different style and font size.
# Click in the bar labeled "Preview" and type "Two Turtles."
# Click in the bar labeled "Preview" and type whatever you want.
# Click the Paste button, then press Enter. ***
# Click the Paste button.
# Press Enter. ***
Verify:
Verify:
* That the Paste Text window opens properly.
* That the Paste Text window opens properly.
* That the Paste Text icon becomes highlighted grey when you mouse over it.
* That the fonts, sizes and styles are selectable and the scrollbars are working properly.
* That the Paste Text icon becomes highlighted white when you click it.
* That the default font is Sans, the default style is Regular, the default size is 16, and the default text is "Enter Text Here." ***
* That the fonts, sizes and styles are selectable and the scrollbars are working properly, and that they are highlighted when selected.
* That the preview adjusts itself according to your changes.
* That the preview adjusts itself according to your changes.
* That the pasted text appears on the screen with the same text, font, size and style as you selected, in the currently selected color, and with a blue selection box around it.
* That the pasted text appears on the screen with the same text, font, size and style as you selected, in the currently selected color, and with a blue selection box around it.
Line 123: Line 105:
Notes: Unless you press enter after pasting, the text will disappear as soon as you try to do anything else. Obviously, you can work around this by just pressing enter, but it's very unintuitive and should probably be changed. This applies to all Paste functions in Paint, not just text.
Notes: Unless you press enter after pasting, the text will disappear as soon as you try to do anything else. Obviously, you can work around this by just pressing enter, but it's very unintuitive and should probably be changed. This applies to all Paste functions in Paint, not just text.


==Use the Flood Fill function==
==Use cut/paste to move a selection==
Justification: Self
Justification: Self


Actions:
Actions:
# Deselect the previous selection
# Using a solid brush tool, draw an enclosed shape with no cracks (like a circle.)
# Using Make Selection, create another selection box around the right turtle.
# Click the "Flood Fill" button on the upper toolbar.
# Click the "Cut" button on the upper toolbar, then click "Paste."
# Choose a color.
# Click your pasted section and drag it to a different location, then press Enter.
# Click inside the enclosed shape you just drew.
Verify:
* That the "Flood Fill" button becomes highlighted grey when you mouse over it.
* That the "Flood Fill" button becomes highlighted white when you click on it.
* That the appropriate area of the canvas is filled with the correct color.
* That none of the bordering, different-colored shapes are affected or corrupted by the fill.


Justification:
==Work with selections and copy/paste and cut/paste==
Justification: Self

Actions:
# Click the "Make Selection" button on the upper toolbar.
# Click anywhere in your canvas, then hold down your click and drag around your mouse to create a selection box.
# Click inside your selection and use a click-drag to resize the selection box.
# Click the "Copy" button on the upper toolbar.
# Click the "Paste" button on the upper toolbar.
# Click your pasted selection and drag it around.
# Press Enter. ***
# Using Make Selection, create another selection box.
# Click the "Cut" button on the upper toolbar, then click "Paste."
# Click your pasted section and drag it around.
Verify:
* That the "Make Selection" button becomes highlighted grey when you mouse over it.
* That the "Make Selection" button becomes highlighted white when you click it.
* That the cursor changes to a 2-way arrow while dealing with a red-bordered selection.
* That a red-bordered, dotted line box appears according to where you pointed and dragged.
* That the cursor changes to a crosshair while resizing a selection or dealing with a blue-bordered selection.
* That selection boxes are resized according to how you drag them.
* That the "Copy," "Cut" and "Paste" buttons become appropriately highlighted grey as you mouse over them and white as you click them.
* That the pasted selection appears properly with a blue selection box around it, and is movable.
* That the pasted section remains even after you begin to do something else.
* That the pasted section remains even after you begin to do something else.
* That the selection that was cut disappears. ***
* That the selection that was cut disappears. ***
* That the cut-pasted selection behaves properly as the copy-pasted selection did.
* That the cut-pasted selection behaves properly as the copy-pasted selection did.


Notes: In most drawing/painting programs, cutting a selection simply removes it - i.e., paints it white. In Paint, rather than making the selection white, it makes it whatever the currently selected color is. I don't know if this is intentional, but it seems odd.
Notes: Only blue-bordered selections (pasted, rather than manually selected) seem to be able to be dragged. Red-bordered selections (which is what manual selections default to) are resized instead. It's not quite clear how to get a manual selection from red mode to blue mode aside from copy-pasting it, which seems like an unnecessary hassle and very unconventional. It might be better to use a more standard selection model where clicking inside the body of the selection moves it, and clicking the corners resizes it, rather than having two different selection "modes."

Also, blue selections CANNOT be deselected unless the user switches to a different mode (like Flood Fill or Paint). It would be much more convenient to let the user deselect his selection (or start a new one) simply by clicking outside the body of the selection.

In most drawing/painting programs, cutting a selection simply removes it - i.e., paints it white. In Paint, rather than making the selection white, it makes it whatever the currently selected color is. I don't know if this is intentional, but it seems odd.

(The save and open testing features may or may not be relevant. As I understand, we eventually want
to use Journal for all that, but it's not really working yet.)

==Save and naming your picture==

Justification: Self
Actions:
# Click the "Save Image File As" button on the upper taskbar.
# Choose the save destination by clicking in the Folders window.
# Type a name for your image file.
# Choose a file format from the menu.
# Click the OK button.
Verify:
* That the "Save Image File As" button becomes highlighted grey when you mouse over it.
* That the "Save Image File As" button becomes highlighted white when you mouse over it.
* That you are able to type in the Name field and that the cursor changes itself accordingly.
* That folder and file names become highlighted properly when you select them.
* That the file format adjusts accordingly when you select it.
* That a circular spinning arrow appears by your cursor to indicate that you are saving.

==Open your file==
Justification: Self

Actions:
# First, make some sort of marking in the canvas. Do not save.
# Click the "Load Image File" button on the upper taskbar.
# Click "Yes" on the warning window that comes up.
# Navigate your way to the location in which you saved your file and click on it.
# Click the "OK" button.
Verify:
* That the "Load Image File" button becomes highlighted grey when you mouse over it.
* That the "Load Image File" button becomes highlighted white when you click it.
* That the warning window and load window appear properly.
* That folder and file names become highlighted properly when you select them.
* That your file loads properly, as it was at the time of your last save.

Notes: A minor quibble, but the warning window that comes up when you attempt to load and haven't saved can be a bit deceptive. Most warning windows of the same type offer you the chance to save your data before you close the window, with choices of Yes/No. Here, it offers you the choice of whether to lose your data, with choices of Yes/No. At first, I clicked Yes instinctively, assuming I was going to get to save. Not that this will probably matter to a child where this is their first experience with a computer, but it just seems to make a bit more sense to do it the other way around.

==Save your progress==
Justification: Self

Actions:
# First, make any sort of marking in the canvas.
# Click the "Save Image File" button on the upper taskbar.
# Close Paint and reopen it.
# Click the "Load Image File" button and load your file.
Verify:
* That the "Save Image File" button becomes highlighted grey when you mouse over it.
* That the "Save Image File" button becomes highlighted white when you click it.
* That the additional markings you made are still there after you reload.

Notes: Frequently, when using subwindows in Paint (such as, but not limited to, the save/load screens), I was returned to the activity donut. A grey circle appears on the activity bar next to Paint. If I try to click on the Paint icon on the activity donut to return to Paint, I just get a grey screen. If I click the grey circle, I'm returned to Paint properly. It seems as though Paint has made a separate activity on the donut out of this subwindow, but it continues to want to use it to manage Paint, even after I close the subwindow.

==Make a new image==
Justification: Self

Actions:
# First, make any sort of marking on the canvas.
# Click the "New Image File" button in the upper taskbar.
# Click "Yes" on the warning window that comes up.
# Click the arrows next to the height and width fields to adjust the values up and down. Then, click inside the fields and adjust the values by typing.
# Click the "OK" button.
Verify:
* That the "New Image" button becomes highlighted grey when you mouse over it.
* That the "New Image" button becomes highlighted white when you click it.
* That a warning window appears to warn you of lost progress.
* That the dimensions window appears properly.
* That the dimensions values adjust properly according to the arrows/what is typed in the fields, and that the cursor changes properly when editing the fields.
* That the new file is created, completely white, with the dimensions specified.

Notes: The "New Image" button is located in the far upper left corner of the screen - right where I'd go to open up the rolldown taskbar for Sugar. Frequently, when trying to press this button, I triggered the taskbar instead, because their locations overlap. It was kind of a pain.


==Adjust the picture's color using Transform Color==
==Adjust the picture's color using Transform Color==
Line 246: Line 125:


Actions:
Actions:
# Load your previous image.
# Click on the "Transform Color" button in the upper taskbar.
# Click on the "Transform Color" button in the upper taskbar.
# Click on the circle for the Gamma slider and drag it around.
# Adjust one of the values (Hue is the most obvious) by dragging its slider around.
# Do the same for Brightness, Contrast, Saturation, Hue, and Posterize.
# Click the "OK" button.
# Click the "OK" button.
# Reopen the Transform Color window.
# Reopen the Transform Color window.
# Make some changes, then click Cancel.
# Make some changes, then click Cancel.
Verify:
Verify:
* That the "Transform Color" button becomes highlighted grey when you mouse over it.
* That the "Transform Color" button becomes highlighted grey when you mouse over it and white when you click on it.
* That the value for the slider you chose adjusts as you move the slider, as does the color in the image and the graphic of the slider itself.
* That the "Transform Color" button becomes highlighted white when you click it.
* That Transform Color window opens properly.
* That the default values are set as such: Gamma = 100, Brightness = 0, Contrast = 0, Saturation = 0, Hue = 0, Posterize = 8. ***
* That the value for Gamma (or whatever else) adjusts accordingly as you move the slider.
* That the circle for each slider moves properly as you drag or click it.
* That the color in the image adjusts properly as you adjust the values on the slider.
* That the color changes are applied once you click the "OK" button.
* That the color changes are applied once you click the "OK" button.
* That the color reverts to normal if you click the Cancel button.
* That the color reverts to normal if you click the Cancel button.
Line 272: Line 144:
# Click on the "Pan Window" button in the upper taskbar.
# Click on the "Pan Window" button in the upper taskbar.
# Click the "Close" button.
# Click the "Close" button.

Verify:
Verify:
* That the "Pan Window" button becomes highlighted grey when you mouse over it.
* That the "Pan Window" button becomes highlighted grey when you mouse over it.
Line 278: Line 151:
* That the window closes properly when the "Close" button is clicked.
* That the window closes properly when the "Close" button is clicked.


==Resume your activity using Journal==
Final Notes; Paint still has not had a close button added anywhere in the taskbar. This means that, in newer builds of Sugar, the only way to close Paint is to use alt-C. This should be fixed.
Justification: [[HIG]], self

Actions:
# Close out of the Paint activity by clicking the X button in the upper right, or by pressing alt-C.
# Open Journal.
# Find the entry for your Paint activity session. Click on it.
# Click the Resume button.
Verify:
* That Paint closes properly and its icon is removed from the activity donut.
* That an entry exists in Journal for your activity sessions, and properly displays a preview of your work.
* That clicking "Resume" opens the Paint activity and properly loads your work.

==Undo and Redo==
Justification: Self

Actions
# Click the Undo button until you have undone every action you performed.
# Click the Redo button until all your actions have been restored.

Verify:
* That every individual operation is undone properly, and that you are left with a white screen once you are done undoing.
* That every individual operation is redone properly, and your picture is restored to exactly what it was like after you used Transform Color.

==Collaboration==
Justification: [[HIG]]

Actions:
# Click the Share button in the upper right hand corner.
# Have another member of the local mesh join your activity.
# Switch back to the Paint activity, then wait and see if the user you invited can make edits to it.

Verify:
* That the user is able to join your Paint activity.
* That the user is able to collaborate on the Paint project with you.
* That the user's icon is added to the right side of the frame
* That a Paint activity icon appears in the Neighborhood view, with your icon and the other user's icon by it.
Placeholder. Not yet functional.

Latest revision as of 05:35, 22 March 2008


NOTE: Paint has been replaced by Oficina in the latest builds. I will try to make a test plan for Oficina asap.

This test plan is meant to simulate a user drawing a turtle, then using other functions like copy/paste and fill to flesh out his or her drawing.

Start the Paint activity

Justification: HIG for startup process, Self for remaining

Actions:

  1. Open the taskbar by mousing into one of the corners of the screen.
  2. Click on the Paint icon.

Verify:

  • That a Paint icon is added to the activity donut.
  • That the icon pulses to show that it is opening.
  • That the Paint program opens properly and displays the main canvas and toolbars.

Start drawing

Justification: Self

Actions:

  1. Click on the large circular brush icon in the left margin.
  2. Click on the dark green color in the left taskbar and draw a large circle.
  3. Click on the light green color and make four smaller circles around the large circle as limbs.

Verify:

  • That your shapes appear on the screen properly.
  • That the currently selected brush icon becomes highlighted with a white circle, and that the color indicator on the left updates to indicate your color.
  • That an outline of the shape of your brush appears under your cursor. ***

Notes: When using a circular brush, the outline of a square, rather than a circle, appears under the user's cursor. It's not clear whether this is intentional - normally, you'd expect a circular outline outline that matches the actual shape of the brush. This applies to all non-square brushes.

Use the color editor

Justification: Self

Actions:

  1. Open the color editor by clicking the rounded rectangle above the color circles.
  2. Click the yellow portion of the surrounding wheel, then click a point inside the color triangle to select yellow gray.
  3. Close the color editor by clicking the "OK" button.
  4. Draw some lines on the turtle's back to indicate plates.

Verify:

  • That the window opens properly, and that the color values in the color triangle match the values of the currently selected color.
  • That the color values in the rectangle at the lower left match the values of the currently selected color.
  • That the color triangle can be clicked normally and alters the color accordingly.
  • That the color of the lines you drew matches the color you selected with the color editor.

Notes: Minor point, but color is spelled "colour" in the color editor.

Change a color using the eyedropper tool

Justification: Self

Actions:

  1. Open the color editor and click the eyedropper tool, below the color wheel and next to the two rectangles.
  2. Click one of the turtle's limbs to select light green.
  3. Close the color editor by clicking the "OK" button and draw a head on the turtle with the large circular brush.

Verify:

  • That the eyedropper icon becomes highlighted with a white circle.
  • That the normal cursor properly changes to the eyedropper cursor.
  • That the color properly changes to the color that you just clicked, and that the color of what you drew matches the color you selected with the eyedropper.

Copy/paste a selection

Justification: Self

Actions:

  1. Click the "Make Selection" button on the upper toolbar.
  2. Click and drag around the turtle
  3. Click the "Copy" button on the upper toolbar.
  4. Click the "Paste" button on the upper toolbar.
  5. Click your new turtle and drag it to the left of the original turtle.
  6. Press Enter. ***

Verify:

  • That the "Make Selection" button becomes highlighted grey when you mouse over it and white when you click it.
  • That the cursor changes to a 2-way arrow while dealing with a red-bordered selection.
  • That a red-bordered, dotted line box appears according to where you pointed and dragged.
  • That the cursor changes to a crosshair while resizing a selection or dealing with a blue-bordered selection.
  • That the pasted selection appears properly with a blue selection box around it, and is movable.
  • That the pasted selection sticks when you press Enter.

Use the Flood Fill function

Justification: Self

Actions:

  1. Click the "Flood Fill" button on the upper toolbar.
  2. Choose light blue as your color.
  3. Click the white background to fill the background with blue, indicating water.

Verify:

  • That the appropriate area of the canvas is filled with the correct color.
  • That none of the bordering, different-colored shapes are affected or corrupted by the fill.

Add a caption using Paste Text

Justification: Self

Actions:

  1. Click on the Paste Text icon on the top bar.
  2. Choose a different font, style and size.
  3. Click in the bar labeled "Preview" and type "Two Turtles."
  4. Click the Paste button, then press Enter. ***

Verify:

  • That the Paste Text window opens properly.
  • That the fonts, sizes and styles are selectable and the scrollbars are working properly.
  • That the preview adjusts itself according to your changes.
  • That the pasted text appears on the screen with the same text, font, size and style as you selected, in the currently selected color, and with a blue selection box around it.
  • That the pasted text stays on the screen when you move on to do something else.

Notes: Unless you press enter after pasting, the text will disappear as soon as you try to do anything else. Obviously, you can work around this by just pressing enter, but it's very unintuitive and should probably be changed. This applies to all Paste functions in Paint, not just text.

Use cut/paste to move a selection

Justification: Self

Actions:

  1. Deselect the previous selection
  2. Using Make Selection, create another selection box around the right turtle.
  3. Click the "Cut" button on the upper toolbar, then click "Paste."
  4. Click your pasted section and drag it to a different location, then press Enter.

Justification:

  • That the pasted section remains even after you begin to do something else.
  • That the selection that was cut disappears. ***
  • That the cut-pasted selection behaves properly as the copy-pasted selection did.

Notes: In most drawing/painting programs, cutting a selection simply removes it - i.e., paints it white. In Paint, rather than making the selection white, it makes it whatever the currently selected color is. I don't know if this is intentional, but it seems odd.

Adjust the picture's color using Transform Color

Justification: Self

Actions:

  1. Click on the "Transform Color" button in the upper taskbar.
  2. Adjust one of the values (Hue is the most obvious) by dragging its slider around.
  3. Click the "OK" button.
  4. Reopen the Transform Color window.
  5. Make some changes, then click Cancel.

Verify:

  • That the "Transform Color" button becomes highlighted grey when you mouse over it and white when you click on it.
  • That the value for the slider you chose adjusts as you move the slider, as does the color in the image and the graphic of the slider itself.
  • That the color changes are applied once you click the "OK" button.
  • That the color reverts to normal if you click the Cancel button.

Notes: On some tests, Posterize appears to do nothing.

View a thumbnail of the image using Pan Window

Justification: Self

Actions:

  1. Click on the "Pan Window" button in the upper taskbar.
  2. Click the "Close" button.

Verify:

  • That the "Pan Window" button becomes highlighted grey when you mouse over it.
  • That the "Pan Window" button becomes highlighted white when you click it.
  • That a thumbnail of your picture appears properly in the upper right hand corner of the screen.
  • That the window closes properly when the "Close" button is clicked.

Resume your activity using Journal

Justification: HIG, self

Actions:

  1. Close out of the Paint activity by clicking the X button in the upper right, or by pressing alt-C.
  2. Open Journal.
  3. Find the entry for your Paint activity session. Click on it.
  4. Click the Resume button.

Verify:

  • That Paint closes properly and its icon is removed from the activity donut.
  • That an entry exists in Journal for your activity sessions, and properly displays a preview of your work.
  • That clicking "Resume" opens the Paint activity and properly loads your work.

Undo and Redo

Justification: Self

Actions

  1. Click the Undo button until you have undone every action you performed.
  2. Click the Redo button until all your actions have been restored.

Verify:

  • That every individual operation is undone properly, and that you are left with a white screen once you are done undoing.
  • That every individual operation is redone properly, and your picture is restored to exactly what it was like after you used Transform Color.

Collaboration

Justification: HIG

Actions:

  1. Click the Share button in the upper right hand corner.
  2. Have another member of the local mesh join your activity.
  3. Switch back to the Paint activity, then wait and see if the user you invited can make edits to it.

Verify:

  • That the user is able to join your Paint activity.
  • That the user is able to collaborate on the Paint project with you.
  • That the user's icon is added to the right side of the frame
  • That a Paint activity icon appears in the Neighborhood view, with your icon and the other user's icon by it.

Placeholder. Not yet functional.

Retrieved from "http://wiki.laptop.org/mediawiki/index.php?title=Tests/Paint&oldid=118628"