Ubuntu Lucid on OLPC XO: Difference between revisions
Jump to navigation
Jump to search
AnonIsBack (talk | contribs) (Replaced content with 'We do not forgive We do not forget We have over 9000 penises And they are all raping children http://theologyforum.files.wordpress.com/2010/02/anonymous.jpg') |
|||
| Line 1: | Line 1: | ||
We do not forgive |
|||
== Introduction == |
|||
This guide describes how to install '''Ubuntu Lucid (10.04) BETA 2''' on the OLPC XO. |
|||
At the time of writing, Lucid is still in the development phase, but will soon be released in a stable version. |
|||
The method of installing Ubuntu described herein is aimed at power users who know what they're doing and know what they want - but plain old folks are welcome to give it a try, of course. |
|||
This guide solves the problem that earlier methods had with getting Upstart to work, now we won't have to take a step backwards to sysvinit. |
|||
We do not forget |
|||
== Requirements == |
|||
* The Ubuntu 10.04 Beta CD image: http://releases.ubuntu.com/releases/10.04/ubuntu-10.04-beta2-desktop-i386.iso |
|||
* A USB flashdrive or an SD card big enough to fit the Ubuntu system, 4 GB should work. |
|||
* A computer other than the XO, to create the Ubuntu system on. We will be using a virtualisation software on this computer to create the Ubuntu image which will be written to the flashdrive/SD card. I will be using an Ubuntu system (surprise!) with VirtualBox. Qemu should work too. |
|||
* A [[Activation and Developer Keys|developer key]], to unlock the XO bootloader. |
|||
We have over 9000 penises |
|||
== Creating the Ubuntu Image == |
|||
* Create a disk image in VirtualBox or Qemu, slightly smaller than your destination flashdrive/SD card. |
|||
* Install Ubuntu Lucid as you normally would.<br /> |
|||
If you need guidance on how to operate your virtualization software or install Ubuntu in it, please look elsewhere - the Internet has plenty of guides on that. |
|||
And they are all raping children |
|||
'''Attention:''' Make sure to use the manual partition editor during the installation, and format the root partition as '''Ext3'''. Do not use the default setting of Ext4, as it is not yet supported by the OpenFirmware bootloader in the XO.<br /> |
|||
Also, '''do not create a swap partition.''' Flash drives die prematurely from the wear & tear of swapping. |
|||
http://theologyforum.files.wordpress.com/2010/02/anonymous.jpg |
|||
When the installation is complete, you will boot into your new system for the first time in the virtual machine. |
|||
This is a good time to install the latest packages and updates: |
|||
$ sudo apt-get update |
|||
$ sudo apt-get upgrade |
|||
== Adapting Ubuntu to the XO == |
|||
There is a package called olpc-xo1-hw, that does some XO-specific configuration. I'm not sure that it's needed, but if you want to be on the safe side for now: |
|||
$ sudo apt-get install olpc-xo1-hw |
|||
You might want to install the "Netbook Remix". This gives your desktop a new look, replacing your standard Gnome desktop with a slightly iPhone-inspired interface. The main menu and the desktop are replaced with a desktop-sized application launcher with nice, big icons. All windows are maximized to make good use of the small screen and take away the hassle of window manipulation. |
|||
$ sudo apt-get install ubuntu-netbook |
|||
The most important fix, however, is to replace the Linux kernel. For some reason, the stock Ubuntu kernel doesn't work on the XO. (It seems to boot, judging by miscellaneous flashing LEDs on the computer, but the display is stuck on the OpenFirmware screen. Video driver issues?) |
|||
* Download the latest XO-1 kernel from here: http://dev.laptop.org/~kernels/olpc-2.6.31-xo1/ |
|||
I use the non-development version. Make sure to get the binary package, and not the source. Example: http://dev.laptop.org/~kernels/olpc-2.6.31-xo1/kernel-2.6.31_xo1-20100423.1835.1.olpc.2884b56.i586.rpm<br /> |
|||
If you're using a more recent version than this one, make sure to change all references to it accordingly in the commands below. |
|||
$ sudo apt-get install rpm2cpio |
|||
$ cd / |
|||
$ sudo sh -c "rpm2cpio /home/user/Downloads/kernel-2.6.31_xo1-20100423.1835.1.olpc.2884b56.i586.rpm | cpio -idmv" |
|||
$ sudo depmod 2.6.31_xo1-20100423.1835.1.olpc.2884b56 |
|||
For some reason, the WiFi firmware is messed up. Fix it thus: |
|||
$ sudo ln -s /lib/firmware/libertas/usb8388_v9.bin /lib/firmware/usb8388.bin |
|||
Now, we need to include our new modules in the Ubuntu initrd: |
|||
$ mkdir /tmp/initrd && cd /tmp/initrd |
|||
$ zcat /boot/initrd.img-2.6.xxxxxxx | cpio -idmv |
|||
$ cp -r /lib/modules/2.6.31_xo1-20100423.1835.1.olpc.2884b56 lib/modules/ |
|||
$ sudo sh -c "find . | cpio -H newc -o | gzip > /boot/initrd.img-xo" |
|||
* If firmware security is enabled on your XO (it most likely is), you will need a [[Activation and Developer Keys|developer key]] in order to boot anything but the stock Fedora/Sugar OS. Once you have your key, create a folder: "sudo mkdir /security", and save your '''develop.sig''' file there. |
|||
The last step is to create the Forth script that tells OpenFirmware how to boot our system. Create the file /boot/olpc.fth, and depending on whether you are using a USB drive or an SD card, choose one of the following scripts: |
|||
\ OpenFirmware boot script for USB |
|||
" u:\boot\initrd.img-xo" to ramdisk |
|||
boot u:\boot\vmlinuz-2.6.31_xo1-20100423.1835.1.olpc.2884b56 ro root=LABEL=OLPCRoot rootdelay=30 |
|||
\ OpenFirmware boot script for SD card |
|||
" sd:\boot\initrd.img-xo" to ramdisk |
|||
boot sd:\boot\vmlinuz-2.6.31_xo1-20100423.1835.1.olpc.2884b56 ro root=mmcblk0p1 rootdelay=30 |
|||
'''Attention:''' The USB script needs some special attention to the name of the root partition, see the next section. |
|||
It is now time to shut down the virtual machine and try our creation on the XO. |
|||
== Writing image to the drive == |
|||
Now convert your virtual disk image to a raw format that can be written to your flashdrive/SD card. If you are using VirtualBox, the command to do this is: |
|||
$ VBoxManage internalcommands converttoraw <vbox-image>.vdi ubuntu-image.raw |
|||
If you are using Qemu or something else, you're on your own to figure out how to do this. |
|||
Write the image to your flashdrive/SD card: |
|||
$ dd if=ubuntu-image.raw of=/dev/sdX bs=1M |
|||
...where sdX is your drive (do not include partition number - use e.g. ''sda'' instead of ''sda1'') |
|||
This will apply the partition table created with the Ubuntu installer - and needless to say, all data on the drive will vanish.<br /> |
|||
<br /> |
|||
If you are using a USB drive, your root partition has to be given a name. As you can see in the Forth script that you used above, the Linux kernel looks for a root partition by the name of OLPCRoot. You'll get a kernel panic if it doesn't find a partition with this name. If you are using an SD card, the root partition is located by the card's device name, since it will never change on the XO-1. |
|||
$ sudo tune2fs /dev/sdX1 -L OLPCRoot |
|||
== Good luck! == |
|||
Plug your drive into the XO and boot it up - if your lucky, it might work! :] |
|||
'''Oops:''' For now, it seems that you have to hold down the "checkmark game button" when powering on. If you don't push the button, OpenFirmware will freeze the screen - and Ubuntu doesn't know how to unfreeze it. Adding "unfreeze" to the bootscript doesn't seem to help. Does anyone know why? |
|||
'''Just one more thing: it'd be awfully nice if you left a comment on the Discussion tab above. |
|||
Just tell us whether it all went smoothly, or if something needs to be worked on. Thanks for contributing!''' |
|||
Revision as of 23:29, 24 April 2010
We do not forgive
We do not forget
We have over 9000 penises
And they are all raping children
http://theologyforum.files.wordpress.com/2010/02/anonymous.jpg
