Magnetizing your screwdriver: Difference between revisions

From OLPC
Jump to navigation Jump to search
(third method)
No edit summary
 
(3 intermediate revisions by 3 users not shown)
Line 2: Line 2:


# '''Buy one.''' Some screwdrivers are sold pre-magnetized.
# '''Buy one.''' Some screwdrivers are sold pre-magnetized.
# '''Magnetize your own screwdriver tip.''' If your screwdriver is not magnetized, you may be able to magnetize the tip yourself. Take a strong magnet and run the tip of your screwdriver across it about a dozen times in the same direction (pretend you are "painting" the magnet with your screwdriver tip). There is a magnet in the XO on the left side, just below the keyboard, which is strong enough to magnetize some screwdriver tips (you do not have to disassemble the XO - just run your screwdriver under the left side of the keyboard).
# '''Magnetize your own screwdriver tip.''' If your screwdriver is not magnetized, you may be able to magnetize the tip yourself. Take a strong magnet and run the tip of your screwdriver across it about a dozen times in the same direction (pretend you are "painting" the magnet with your screwdriver tip). There is a magnet in the XO on the left side, just below the keyboard, which is strong enough to magnetize some screwdriver tips (you do not have to disassemble the XO - just run your screwdriver under the left side of the keyboard). See the photograph [[Image:Keyboardstep3a.jpg|thumb]] -- the magnet's the square metal thing under the green plastic tab in the upper left corner. -- [[User:Davewa|Davewa]] 14:21, 3 June 2008 (EDT)
# '''Temporarily magnetize your own screwdriver tip.'''. If your screwdriver is not magnetized, holding a decent permanent magnet against the shaft of the screwdriver when you want to use the screwdriver tip to lift or move a screw will work as long as the screwdriver and the magnet are in contact.
# '''Temporarily magnetize your own screwdriver tip.''' If your screwdriver is not magnetized, holding a decent permanent magnet against the shaft of the screwdriver when you want to use the screwdriver tip to lift or move a screw will work as long as the screwdriver and the magnet are in contact.

Latest revision as of 05:04, 6 August 2013

When you are doing a disassembly, having a slightly magnetized screwdriver tip makes it easier to take your XO apart (and put it back together). There are several ways to get a screwdriver with a magnetized tip.

  1. Buy one. Some screwdrivers are sold pre-magnetized.
  2. Magnetize your own screwdriver tip. If your screwdriver is not magnetized, you may be able to magnetize the tip yourself. Take a strong magnet and run the tip of your screwdriver across it about a dozen times in the same direction (pretend you are "painting" the magnet with your screwdriver tip). There is a magnet in the XO on the left side, just below the keyboard, which is strong enough to magnetize some screwdriver tips (you do not have to disassemble the XO - just run your screwdriver under the left side of the keyboard). See the photograph
    Keyboardstep3a.jpg
    -- the magnet's the square metal thing under the green plastic tab in the upper left corner. -- Davewa 14:21, 3 June 2008 (EDT)
  3. Temporarily magnetize your own screwdriver tip. If your screwdriver is not magnetized, holding a decent permanent magnet against the shaft of the screwdriver when you want to use the screwdriver tip to lift or move a screw will work as long as the screwdriver and the magnet are in contact.