Talk:Disassembly bottom: Difference between revisions

From OLPC
Jump to navigation Jump to search
No edit summary
No edit summary
Line 11: Line 11:
*highlight the 6 extra screws
*highlight the 6 extra screws


*Removing the hinge / disconnecting the top and bottom halves of the XO Step 2
*Removing the hinge / disconnecting the top and bottom halves of the XO
*need 4 circles instead of two (there are 4 screws)
Step 2 need 4 circles instead of two (there are 4 screws)
Step 3 picture 2, you aren't really setting aside the top half, it is still connected



*Removing the bottom cover
*Removing the bottom cover
Line 24: Line 26:
Step 2
Step 2
Picture 2 needs an arrow
Picture 2 needs an arrow

Replacing the Keyboard
Step 1
picture 2 needs to include the lower two body screws


Replacing the ALPS
Replacing the ALPS

Revision as of 19:53, 12 June 2008

Things that need to be fixed:

Excellent system for Indicating screws

General: we need an excellent system for indicating the different kinds of screws. I think having a picture with the three piles of screws used and indicating which one is being used. Hypothetically in the format of a white piece of paper with some dividers drawn. We could potentially draft such a PDF that people could print out, and that repair centers/XO hospitals could laminate and use.

  • Removing the handle cover / reaching the screws Step 2
  • picture 1
  • removing the white handle panel is much more easily done by pushing on the tab in the battery case on the other side of the laptop
  • picture 3
  • highlight the 6 extra screws
  • Removing the hinge / disconnecting the top and bottom halves of the XO

Step 2 need 4 circles instead of two (there are 4 screws) Step 3 picture 2, you aren't really setting aside the top half, it is still connected


  • Removing the bottom cover
  • step 1
  • picture 2 needs the screw graphic
  • picture 2 needs an arrow so that it is more language independent
  • Removing the ALPS (touchpad and keyboard control) board
  • Step 1

add a picture where all three tabs are highlighted in the same picture Step 2 Picture 2 needs an arrow

Replacing the Keyboard Step 1 picture 2 needs to include the lower two body screws

Replacing the ALPS Step 1 needs another picture with the screws, and with the screw graphic Step 2 needs a picture which highlights all three cables, also there are 4 pictures of ribbon cables, but only 3 ribbon cables so that's really confusing

Replacing the hinge Step 1 picture 1 needs an arrow picture 2 needs an arrow, also the ear needs to be a little higher up so that we can tell what the hand is doing. picture 3 also note that the screws are fat.. I like the screwdriver holding the right screw. picture 4 need 4 bubbles not 2

Replacing the handle cover step 1 picture 1 needs an arrow Step 2 both pictures need arrows